硬件準備：

USB轉串口

4針杜邦線

PN532模塊

IC卡一張(比如門禁卡，飯卡等)

軟件準備：

Ubuntu 物理機一臺

能夠訪問互聯網

1，將PN532與USB轉串口連接好,放一張IC卡靠近PN532模塊

2，安裝libnfc：

chunli@ubuntu:~$ sudo apt-get install libusb-dev

chunli@ubuntu:~$ wget https://github.com/nfc-tools/libnfc/releases/download/libnfc-1.7.1/libnfc-1.7.1.tar.bz2

chunli@ubuntu:~$ tar xf libnfc-1.7.1.tar.bz2

chunli@ubuntu:~$ cd libnfc-1.7.1/

chunli@ubuntu:~/libnfc-1.7.1$ ./configure --prefix=${HOME}/NFC && make && make install

chunli@ubuntu:~/libnfc-1.7.1$ mkdir -p ${HOME}/NFC/etc/nfc/

chunli@ubuntu:~/libnfc-1.7.1$ vim ${HOME}/NFC/etc/nfc/libnfc.conf

device.name = "microBuilder.eu"

device.connstring = "pn532_uart:/dev/ttyUSB0"

chunli@ubuntu:~/libnfc-1.7.1$

3，檢查Pn532與主機連接狀態：

chunli@ubuntu:~/libnfc-1.7.1$ sudo ${HOME}/NFC/bin/nfc-list

/home/chunli/NFC/bin/nfc-list uses libnfc 1.7.1

NFC device: pn532_uart:/dev/ttyUSB0 opened

1 ISO14443A passive target(s) found:

ISO/IEC 14443A (106 kbps) target:

ATQA (SENS_RES): 00 04

UID (NFCID1): 7e d5 92 90

SAK (SEL_RES): 08

chunli@ubuntu:~/libnfc-1.7.1$

驅動就這樣安裝好了。