wii拆機_設置防磚保護以保護和增強Wii

wii拆機

We’ve shown you how to hack your Wii for homebrew software, emulators, and DVD playback, now it’s time to safeguard your Wii against bricking and fix some annoyances—like that stupid “Press A” health screen.

我們已經向您展示了如何破解Wii的自制軟件，仿真器和DVD播放器，現在是時候保護Wii免受阻塞并解決一些煩惱了，例如愚蠢的“ Press A”健康屏幕。

The thing about console modding and jailbreaking—save for the rare company like Amazon that doesn’t seem to care—is companies will play a game of cat and mouse to try and knock modded console out of commission, undo your awesome mods, or even brick your device. Although extreme moves like bricktacular-updates are rare once you modify your device you have to be vigilant in protecting it against updates that could hurt your sweet setup. Today we’re going to walk you through hardening your Wii and giving it the best brick protection available.

關于控制臺改裝和越獄的事情(對于像亞馬遜這樣罕見的公司而言，似乎并不在意之外)是，公司將玩貓捉老鼠的游戲，試圖使改裝后的控制臺無法使用，撤消令人敬畏的mod甚至變磚您的設備。盡管在修改設備后很少會發生像磚瓦般的更新之類的極端動作，但您必須保持警惕，以防設備遭受可能損害您的最佳設置的更新。今天，我們將帶您逐步強化Wii，并為它提供最好的保護磚。

你需要什么 (What You’ll Need)

For this tutorial you will need the following things:

對于本教程，您將需要以下內容：

A Wii with a softmod and The Homebrew Channel installed.
安裝了softmod和Homebrew頻道的Wii 。
A Wiimote and a GameCube Controller.
Wiimote和GameCube控制器。
An SD card at least 1GB in size.
SD卡大小至少為1GB 。
The zip file of hacks and tools. [Mirror 1] [Mirror 2] **Caution: These three links are currently unavailable**Updated 2/20/16
hacks和工具的zip文件。 [鏡像1] [鏡像2] **警告：這三個鏈接當前不可用**已更新16/2/20

If you already softmodded your Wii you should have all these things on hand already, including an SD card in the Wii with the Homebrew Channel and accompanying /apps/ folder in place. Download the zip file above and extract it to the root of your SD card. The files will automatically extract to the correct directories.

如果您已經對Wii進行了軟修改，那么您應該已經擁有了所有這些東西，包括Wii中帶有Homebrew頻道的SD卡以及相應的/ apps /文件夾。下載上方的zip文件，然后將其解壓縮到SD卡的根目錄中。這些文件將自動解壓縮到正確的目錄。

備份NAND (Backing Up Your NAND)

Don’t panic, we won’t be opening up your Wii with a screwdriver. The photo above is just to give you a tangible view of what we’re doing when we back up the NAND. Deep in the swirly whirly forest of capacitors, chips, and traces seen in the photo above are various flash memory modules (NANDs) that contain critical software. When we back up the NAND we are copy the contents of these important chips and securing a copy we can use to restore the machine later should anything bad happen.

別著急，我們不會用螺絲刀打開Wii。上面的照片僅是為了讓您切實了解備份NAND時的工作。在上圖所示的電容器，芯片和走線的漩渦狀旋渦深處，是各種包含關鍵軟件的閃存模塊(NAND)。當我們備份NAND時，我們將復制這些重要芯片的內容，并保護副本，以便在發生任何不良情況時可以在以后用于恢復計算機。

To backup the Wii NAND we’ll be using the BootMii application. If you do not already have the BootMii application installed you need to repeat the steps in our softmod guide (or whatever softmod tutorial you used) in order to call up the HackMii installer once again.

要備份Wii NAND，我們將使用BootMii應用程序。如果尚未安裝BootMii應用程序，則需要重復我們的softmod指南(或您使用的任何softmod教程)中的步驟，以便再次調用HackMii安裝程序。

When you go to install BootMii you have two options. You can install BootMii as Boot2 or an IOS. If your Wii will allow you to, installing it at Boot2 is ideal as it gives BootMii a deeper control over the Wii which makes recovery easier in the event of a brick. Wii units manufactured before 2008 should have no problem installing BootMii in the Boot2 slot, newer Wii units may be forced to install as an IOS. Don’t be discouraged if you have to install as an IOS, we’ll still be able to backup and restore your Wii.

當您安裝BootMii時，有兩個選擇。您可以將BootMii安裝為Boot2或IOS。如果您的Wii允許您這樣做，那么將其安裝在Boot2上是理想的選擇，因為它可以使BootMii對Wii進行更深入的控制，從而在出現磚塊時更輕松地進行恢復。 2008年之前生產的Wii單元在Boot2插槽中安裝BootMii應該沒有問題，可能會迫使較新的Wii單元作為IOS安裝。如果您必須作為IOS進行安裝，請不要氣,，我們仍然可以備份和還原Wii。

Once the installation is complete, return to the main menu of the HackMii and restart your Wii. If you were lucky enough to have a Wii which allowed for Boot2 installation you can simply reboot your Wii at this point—from now on whenever you boot your Wii you’ll be presented with the BootMii menu.

安裝完成后，返回HackMii的主菜單并重新啟動Wii。如果您有幸擁有可以安裝Boot2的Wii，則可以在此時輕松地重新啟動Wii-從現在開始，無論何時啟動Wii，都將顯示BootMii菜單。

If you don’t want that to happen (if you have kids or roommates for example you don’t want messing around with a powerful tool like BootMii) you can, once you’re done with this tutorial, rename the /BootMii/ folder on the root of your SD card to something like /BootMii-Disabled/. Rename it in the future if you need to use BootMii again.

如果您不希望這種情況發生(例如，如果您有孩子或室友，您不想弄亂像BootMii這樣的強大工具)，那么在完成本教程后，可以重命名/ BootMii /文件夾在SD卡的根目錄上，類似于/ BootMii-Disabled / 。如果將來需要再次使用BootMii，請重命名。

If you installed BootMii as a IOS, just exit the HackMii installer and return to the Homebrew Channel.

如果將BootMii作為IOS安裝，則只需退出HackMii安裝程序并返回到Homebrew Channel。

Click the “Launch BootMii” icon to? load the BootMii loader. Whether you rebooted or went through the Homebrew Channel, you should see the following on your screen:

單擊“啟動BootMii”圖標以加載BootMii加載程序。無論您是重新啟動還是通過Homebrew頻道，您都應該在屏幕上看到以下內容：

At this point we’re going to need the GameCube controller. (Note: If you’re ever?in a bind without a GameCube controller you can navigate the BootMii with the Wii Power and Reset button. It’s awkward, but it works if you’re desperate.) Plug in the controller and use the directional pad to navigate over to the last icon, the two gears. Press A. You should see the following screen:

在這一點上，我們將需要GameCube控制器。 (注意：如果您在沒有GameCube控制器的情況下處于綁定狀態，則可以使用Wii的“電源和重置”按鈕導航BootMii。這很尷尬，但如果您不顧一切也可以使用。)插入控制器并使用方向盤導航到最后一個圖標，兩個齒輪。按A。您應該看到以下屏幕：

Here you can backup and restore your NAND to your SD card. A NAND backup is typically 500-600MB in size so if you didn’t heed our advice earlier to use a 1GB or larger card now is the time to grab a bigger SD card. Select the first icon, with the green arrow, and press A. The BootMii Backup tool will load, press A again to confirm you want to backup the NAND. Your screen should look something like this:

在這里，您可以將NAND備份并還原到SD卡。 NAND備份的大小通常為500-600MB，因此，如果您不注意我們的建議，現在就可以使用更大的SD卡，現在就使用1GB或更大的卡。選擇帶有綠色箭頭的第一個圖標，然后按A。BootMii Backup工具將加載，再次按A確認您要備份NAND。您的屏幕應如下所示：

Now is the time to go browse How-To Geek’s front page, get a snack, or otherwise kill some time. The backup might not take forever but it certainly feels that way, it’s like watching a hard drive defrag. Come back in 20 minutes and check on it once it’s backed up and verified the NAND.

現在是時候瀏覽How-To Geek的首頁，品嘗小吃或以其他方式消磨時間了。備份可能不會花很長時間，但肯定會像那樣，就像看著硬盤碎片整理一樣。請在20分鐘內回來，并在備份并驗證NAND后對其進行檢查。

If you notice the “Factory bad block” message when you return, don’t panic. It’s common for there to be bad blocks in the NAND. A NAND backup with a back block error will work perfectly fine for a restoration later on. When the backup is complete, exit BootMii.

如果您在返回時注意到“ Factory bad block”消息，請不要驚慌。 NAND中經常有壞塊。帶有后擋錯誤的NAND備份可以很好地用于以后的恢復。備份完成后，退出BootMii。

At this point you’ll want to take the SD card and copy the NAND backup files to a safe location.

此時，您將需要取出SD卡并將NAND備份文件復制到安全位置。

Insert the SD card in your computer and copy the keys.bin and the nand.bin files—backing them up to a CD-R wouldn’t be a bad idea. You can also leave a copy on the SD card for safe keeping, just change the .bin extension to .bak.

將SD卡插入計算機，然后復制keys.bin和nand.bin文件-將它們備份到CD-R并不是一個壞主意。您也可以將副本保留在SD卡上以安全保存，只需將.bin擴展名更改為.bak即可。

Once you’ve secured the files in some fashion the backup process is complete. In the future should your exploits in homebrew software and Wii modding lead you down the road to brickdom, all you’ll need to do is use BootMii to reverse the process and reinstall your working NAND backup.

一旦以某種方式保護了文件，備份過程就完成了。將來，如果您在自制軟件和Wii改裝方面的開發使您走入泥潭，您所需要做的就是使用BootMii來逆轉該過程并重新安裝可用的NAND備份。

重新安裝Trucha Bug以增強Wii的性能 (Reinstall the Trucha Bug to Supercharge Your Wii)

Early versions of the Wii OS had a bug, known as the Trucha Bug, which allowed for the running of unsigned code. Nintendo has long since patched the bug but that didn’t slow down the homebrew community. We’re going to restore the bug in order to expand the power of your Wii and the range of homebrew software it can run.

Wii OS的早期版本存在一個稱為Trucha Bug的錯誤，該錯誤允許運行未簽名的代碼。任天堂很早就修補了該錯誤，但這并沒有減慢自制軟件社區的速度。我們將修復該錯誤，以擴展Wii的功能以及可運行的自制軟件的范圍。

Boot into the Homebrew Channel. If you followed the instructions in the “What You Need” section, your Homebrew menu should look like this (you may already have other homebrew installed, so don’t worry if these four items are in a different order or split across two pages).

啟動進入自制頻道。如果按照“您需要的內容”部分中的說明進行操作，則Homebrew菜單應如下所示(您可能已經安裝了其他Homebrew，因此請不要擔心這四個項目的順序不同或分為兩頁) 。

To start, we need to install IOS36. Click on it to start the installation process. It’s totally automated and will install IOS36 and return to the Homebrew Channel menu.

首先，我們需要安裝IOS36。單擊它開始安裝過程。它是完全自動化的，將安裝IOS36并返回到Homebrew Channel菜單。

For our next step, you can choose one of two options depending on whether or not you already have additional WAD files in your /WAD/ directory.

對于下一步，您可以根據/ WAD /目錄中是否已經有其他WAD文件，選擇兩個選項之一。

If your /WAD/ folder is empty, save for the WAD files we extracted at the beginning of this tutorial, select the YAWM Multimod batch. It will automatically install all the WAD files in the /WAD/ directory and then return to the Homebrew Channel menu.

如果您的/ WAD /文件夾為空，請保存YAWM Multimod批處理，并保存在本教程開始時提取的WAD文件。它將自動將所有WAD文件安裝在/ WAD /目錄中，然后返回到Homebrew Channel菜單。

If you have older WADS from other projects in your /WAD/ folder, use the Multi-Mod Manager to selectively install the WAD files.

如果/ WAD /文件夾中的其他項目有較舊的WADS ，請使用Multi-Mod Manager選擇性地安裝WAD文件。

If you’re selectively installing the WAD files select the WAD menu from Multi-Mod Manager and use the + key on your Wiimote to select all the cIOS files and the IOS80 WAD files. Press A to bulk install them. Exit back to the Homebrew Channel.

如果要有選擇地安裝WAD文件，請從Multi-Mod Manager中選擇WAD菜單，然后使用Wiimote上的+鍵選擇所有cIOS文件和IOS80 WAD文件。按A批量安裝它們。退出回到自制頻道。

At this point in the tutorial we’ve backed up the NAND, activated the Trucha Bug (which we’ll need for the next step), and installed updated IOS files which will make future Homebrew and modding adventures a breeze.

在本教程的這一點上，我們已經備份了NAND??，激活了Trucha Bug(下一步需要使用)，并安裝了更新的IOS文件，這將使以后的自釀和改裝冒險變得輕而易舉。

安裝Priiloader并為Wii裝磚 (Installing Priiloader and Armoring Your Wii Against Bricking)

The Priiloader and BootMii are similar applications but with significant differences under the hood. Both load when the Wii starts, but where as BootMii is limited to backing up the NAND and functioning as a basic launcher, Priiloader is designed to alter what happens on your Wii. By loading before anything else the Priiloader allows you to change system wide settings on the Wii, turn off updates, and otherwise streamline and protect your Wii.

Priiloader和BootMii是相似的應用程序，但在內部卻有顯著差異。兩者都在Wii啟動時加載，但是由于BootMii僅限于備份NAND并用作基本啟動器，Priiloader旨在更改Wii上發生的情況。通過先加載，Priiloader允許您更改Wii上的系統范圍設置，關閉更新，以及簡化并保護Wii。

Time to return to the Homebrew Channel, if you’re not already there. Select Priiloader 236. When the Priiloader runs there is a high probability you’ll get a few yellow lines of error code in the process:

如果您還不在的話，該回到自制頻道了。選擇Priiloader236。在Priiloader運行時，很有可能在此過程中出現幾行錯誤代碼：

Ignore these errors, everything installed fine and you’re ready to dig into the Priiloader settings.

忽略這些錯誤，一切都安裝正確，并且您可以開始研究Priiloader設置。

Turn your Wii off. Hold down the reset button, while the Wii is off, and then press the power button. Your Wii will boot but instead of taking you to the Wii Menu it’ll take you to the white Priiloader menu seen at the beginning of this section.

關閉Wii。 Wii關閉時，按住重置按鈕，然后按電源按鈕。您的Wii將會啟動，但不會帶您進入Wii菜單，而是帶您進入本節開頭所示的白色Priiloader菜單。

Use the GameCube controller to navigate down to System Menu Hacks. Press A. Inside the System Menu Hacks you’ll see a screen that looks like this, minus our highlighting of course:

使用GameCube控制器向下導航到“系統菜單”。按A。在“系統菜單”中，您會看到一個類似于以下內容的屏幕，減去我們的突出顯示：

By default everything is disabled, we recommend you toggle on “Auto-Press A at Health Screen” (because pressing A every damn time the Wii starts is extremely annoying), “Block Disc Updates” and “Block Online Updates” (because you didn’t do all this work just to have Nintendo undo it) and “Region Free EVERYTHING” (because some day somebody might bring the European version of Hello Kitty Adventure Island Party City 5 to your house and you’ll want to play it). If you want to read more about the additional settings and determine if you should enable them or not, check out the full documentation for Priiloader here.

默認情況下，所有功能均處于禁用狀態，我們建議您打開“在運行狀況屏幕上自動按A”(因為在Wii啟動時每次該死的時間都按A會很煩人)，“阻止光盤更新”和“阻止在線更新”(因為您沒有要做所有這些工作只是為了讓Nintendo撤消它和“ Region Free EVERYTHING”(因為某天某人可能會將歐洲版的Hello Kitty冒險島派對之城5帶到您的房屋中，并且您想玩它)。如果您想了解更多有關其他設置的信息，并確定是否應該啟用它們，請在此處查閱Priiloader的完整文檔。

Once you’ve enabled the settings you want, save them and restart your Wii. At this point, especially if you have other people using the Wii, you may want to move the apps we used outside of the Homebrew App folder to a backup folder on the SD card in order to keep children or derpy roommates from mucking about in your Wii.

啟用所需的設置后，請保存它們并重新啟動Wii。在這一點上，尤其是如果您有其他人在使用Wii，您可能希望將我們在Homebrew App文件夾之外使用的應用程序移動到SD卡上的備份文件夾中，以防止孩子或懶散的室友在您的房間中亂搞Wii。

Your freshly tweaked Wii now has the best brick protection available. In the rare case that you do brick your console with some aggressive modding, you’ve got a backup NAND on hand to restore it. Happy modding!

您新調整的Wii現在具有最佳的磚保護功能。在極少數情況下，您需要在控制臺上進行一些積極的修改，以備恢復時使用。祝你好運！