Adding quirky animations to your Microsoft PowerPoint presentation gives your slideshow a little extra life. Not only will adding a typewriter or command line animation entertain your audience, but it will also keep them focused on the text.

在您的Microsoft PowerPoint演示文稿中添加古怪的動畫可以使幻燈片更加生動有趣。 添加打字機或命令行動畫不僅會吸引您的觀眾，而且還將使他們專注于文本。

創建打字機/命令行動畫 (Creating a Typewriter/Command Line Animation)

The typewriter and command line animations are very similar. The only differentiating factor is text style. If you’re going with the vintage typewriter look, we recommend going with a 12pt Courier New font in black. For the command-line look, we recommend using a 12pt Lucida Console font in white (or green) over a black background. Since the animations are identical, we’ll go with the command-line style as our example here.

打字機和命令行動畫非常相似。 唯一的區別因素是文本樣式。 如果您要使用老式打字機外觀，建議您使用12pt黑色的Courier New字體。 對于命令行外觀，我們建議在黑色背景上使用白色(或綠色)的12pt Lucida Console字體。 由于動畫是相同的，因此這里以命令行樣式為例。

Go ahead and open PowerPoint and go to the slide where you want the animation.

繼續并打開PowerPoint，然后轉到需要動畫的幻燈片。

You’ll need to make sure you’ve got a black background to work against if you’re going for the command-line look. Head over to the “Insert” tab and then click the “Shapes” button.

如果要使用命令行外觀，則需要確保有黑色背景可以使用。 轉到“插入”選項卡，然后單擊“形狀”按鈕。

A dropdown menu will appear. From the “Rectangles” group, select “Rectangle.”

將會出現一個下拉菜單。 從“矩形”組中，選擇“矩形”。

Click and drag your mouse on the slide to draw the shape. You could make the shape take up the entire slide or make it smaller if you’re demonstrating something on a smaller scale.

單擊并在幻燈片上拖動鼠標以繪制形狀。 如果要以較小的比例演示某些內容，則可以使形狀占據整個幻燈片或使其更小。

Head over to the shapes “Format” tab and select “Shape Fill” from the “Shape Styles” group.

轉到形狀的“格式”選項卡，然后從“形狀樣式”組中選擇“形狀填充”。

Select black from the drop-down menu.

從下拉菜單中選擇黑色。

Do the same for the “Shape Outline.”

對“形狀輪廓”執行相同的操作。

Finally, click and drag to size the shape the way you want it.

最后，單擊并拖動以根據需要調整形狀的大小。

In this example, we’re covering the entire slide.

在此示例中，我們將覆蓋整個幻燈片。

Now it’s time to insert your text. Head over to the “Insert” tab and click the “Text Box” button.

現在是時候插入您的文本了。 轉到“插入”選項卡，然后單擊“文本框”按鈕。

Note:?Yes, you could type text directly into the shape. But, using a text box gives you a little more control over exactly where that text appears.

注意：是的，您可以直接在形狀中輸入文本。 但是，使用文本框可以使您更好地控制文本的確切位置。

Click and drag your mouse on the slide to draw the text box.

單擊并在幻燈片上拖動鼠標以繪制文本框。

Make sure your font’s settings are correct for your respective animation. Since we’re doing the command-line animation for this example, we’ll select Lucida Console (1), 12pt font (2) and white (3).

確保您的字體設置對于您各自的動畫是正確的。 由于我們在此示例中執行命令行動畫，因此我們將選擇Lucida Console(1)，12pt字體(2)和白色(3)。

Go ahead and type the text you want. When you’re done, select the text box, switch to the “Animations” tab, and then select “Appear” from the “Animation” section.

繼續輸入所需的文本。 完成后，選擇文本框，切換到“動畫”選項卡，然后從“動畫”部分中選擇“出現”。

On the same tab, click the “Animation Pane” button.

在同一選項卡上，單擊“動畫窗格”按鈕。

The animation pane will appear on the right-hand side of the window. Select your animation and then click the arrow that appears.

動畫窗格將出現在窗口的右側。 選擇動畫，然后單擊出現的箭頭。

From the drop-down menu, select “Effect Options.”

從下拉菜單中，選擇“效果選項”。

In the window that appears, select the arrow next to “Animate text.” In the dropdown menu that appears, select “By letter.”

在出現的窗口中，選擇“動畫文本”旁邊的箭頭。 在出現的下拉菜單中，選擇“按字母排序”。

Next, enter 0.1 in the “seconds delay between letters” box and then click “OK.”

接下來，在“字母之間的秒數延遲”框中輸入0.1，然后單擊“確定”。

As a matter of good practice, check the animation to make sure it looks good.

作為一種好的做法，請檢查動畫以確保它看起來不錯。

And that’s it. It’s a fun way to demonstrate commands during a presentation or to hold your audience’s attention with an old-fashioned typewriter animation.

就是這樣。 這是一種有趣的方式，可以在演示過程中演示命令或使用老式打字機動畫來吸引聽眾的注意。

翻譯自: https://www.howtogeek.com/413462/how-to-do-a-typewriter-or-command-line-animation-in-powerpoint/