airpods2使用
Just bought yourself or received a new pair of AirPods or AirPods Pro? Welcome to the truly wireless earphones life. Setting up AirPods is quite straightforward, but here’s how to customize and get the most of your AirPods or AirPods Pro.
剛買了自己還是收到了新的AirPods或AirPods Pro？ 歡迎來到真正的無線耳機生活。 設置AirPods非常簡單，但是以下是自定義并充分利用AirPods或AirPods Pro的方法。
如何將AirPods或AirPods Pro與iPhone和iPad配對 (How to Pair Your AirPods or AirPods Pro to iPhone and iPad)
Pairing your new headphones is as simple as it gets. After you unbox your AirPods, hold them near your unlocked iPhone and iPad and flick the case open.
配對新耳機就這么簡單。 拆開AirPods的包裝后，將它們放在未鎖定的iPhone和iPad旁邊，然后輕拂盒子。
Then, press and hold the “Setup” button, which is at the back of the AirPods case.?In a couple of seconds, you’ll see a connection prompt on your iPhone or iPad.
然后，按住AirPods盒背面的“設置”按鈕。 幾秒鐘后，您將在iPhone或iPad上看到連接提示。
If the prompt doesn’t appear automatically, try holding the physical button on the back of the case for several moments to enable pairing mode.
如果提示沒有自動出現，請嘗試按住機箱背面的物理按鈕片刻以啟用配對模式。
Next, all you have to do is tap the “Connect” button.
接下來，您要做的就是點擊“連接”按鈕。
If you’re using second-generation AirPods or AirPods Pro, you’ll also receive a prompt asking if you want to enable the Hey Siri functionality or if you want Siri to read messages out to you aloud.
如果您使用的是第二代AirPods或AirPods Pro，還會收到一條提示，詢問您是否要啟用Hey Siri功能或是否要Siri大聲讀出消息。
Once you tap the “Done” button, your AirPods will be connected and paired. You should now see battery life information in the pop-up message.
一旦點擊“完成”按鈕，您的AirPods將被連接并配對。 現在，您應該在彈出消息中看到電池壽命信息。
If you’re signed in to iCloud, your AirPods will be automatically paired with all of your Apple devices (including iPhone, iPad, Mac, and Apple Watch).
如果您登錄到iCloud，您的AirPods將自動與您所有的Apple設備(包括iPhone，iPad，Mac和Apple Watch)配對。
如何知道您的AirPods或AirPods Pro充電狀態 (How to Know Your AirPods or AirPods Pro Charge Status)
When you flip open your AirPods case, you’ll see a status light in between the two AirPods. For the AirPods Pro and AirPods Wireless Charging Case, the status light is on the front of the case. Tap on the case to see the status.
翻轉打開AirPods機殼時，您會在兩個AirPods之間看到狀態指示燈。 對于AirPods Pro和AirPods無線充電盒，狀態燈在盒的前面。 點擊案例以查看狀態。
This light basically tells you what’s going on with your AirPods or AirPods Pro. Here’s what everything represents:
該指示燈基本上可以告訴您AirPods或AirPods Pro的狀況。 一切代表以下內容：
Amber light (with AirPods attached): AirPods are charging.
琥珀色指示燈(已連接AirPods)： AirPods正在充電。
Amber light (without AirPods attached): Less than full charge remaining in AirPods case.
琥珀色指示燈(未連接AirPods)：電量不足，AirPods盒中的剩余電量仍然不足。
No light: Your AirPods are out of battery and need to be charged.
不亮：您的AirPods電池電量已耗盡，需要充電。
Flashing white light: AirPods are ready to connect.
白燈閃爍： AirPods已準備就緒，可以連接。
Flashing amber light: There’s a pairing error and AirPods might need to be reset.
琥珀色指示燈閃爍：出現配對錯誤，可能需要重置AirPods。
如何自定義您的AirPods或AirPods Pro (How to Customize Your AirPods or AirPods Pro)
Once you’ve paired, connected, and started using your AirPods, it’s time to customize them. On your iPhone or iPad, head to Settings > Bluetooth and tap the “i” button next to your AirPods.
配對，連接并開始使用AirPods之后，就可以自定義它們了。 在您的iPhone或iPad上，前往“設置”>“藍牙”，然后點擊AirPods旁邊的“ i”按鈕。
Here, first, tap the “Name” option to rename your AirPods.
在這里，首先，點擊“名稱”選項以重命名您的AirPods 。
Type in the new name and then tap the “Done” button found on the keyboard. Tap the “Back” button to go back to the AirPods menu.
輸入新名稱，然后點擊鍵盤上的“完成”按鈕。 點擊“返回”按鈕，返回到AirPods菜單。
Next, let’s customize the AirPods’ double-tap gesture. While the default option brings up Siri, you can replace it with Play/Pause, Next Track, Previous Track actions, or disable it altogether.
接下來，讓我們自定義AirPods的雙擊手勢。 當默認選項顯示Siri時，您可以將其替換為播放/暫停，下一曲目，上一曲目動作，或者將其完全禁用。
Tap the “Left” or the “Right” option and then choose a new action from the menu.
點擊“左”或“右”選項，然后從菜單中選擇一個新動作。
If you’re using AirPods Pro, you’ll have a different set of options. The AirPods Pro doesn’t have an ear-tap feature. Instead, you squeeze the stem of the AirPod to invoke an action.
如果您使用的是AirPods Pro，將有不同的選項集。 AirPods Pro沒有耳塞功能。 相反，您可以擠壓AirPod的桿來調用動作。
Under the “Press And Hold AirPods” section, choose the “Left” or the “Right” option to customize it.
在“按住AirPods”部分下，選擇“左”或“右”選項進行自定義。
From here, you can choose Noise Cancellation, Transparency mode, or you can turn the feature off altogether.
在這里，您可以選擇“噪音消除”，“透明”模式，也可以完全關閉此功能。
If you don’t like the fact that AirPods automatically stop playback when you remove them from your ear, you can disable the feature by tapping on the toggle next to “Automatic Ear Detection.”
如果您不喜歡將AirPods從耳朵上移開后會自動停止播放的事實，則可以通過點擊“自動耳朵檢測”旁邊的開關來禁用該功能。
如何將AirPods或AirPods Pro與Mac配對 (How to Pair AirPods or AirPods Pro with Mac)
If you’ve already paired your AirPods or AirPods Pro with your iPhone or iPad, they’ll automatically be paired with your Mac as well (as long as you’re using your iCloud account on all devices).
如果您已經將AirPods或AirPods Pro與iPhone或iPad配對，則它們也會自動與Mac配對(只要您在所有設備上都使用iCloud帳戶)。
To connect to AirPods that are already paired, all you have to do is open the Bluetooth menu, select your AirPods, and then click the “Connect” option.
要連接已配對的AirPods，您要做的就是打開“藍牙”菜單，選擇您的AirPods，然后單擊“連接”選項。
You can also pair AirPods directly to your Mac. To do this, go to System Preferences > Bluetooth. Here, make sure that Bluetooth is enabled and then press and hold the “Setup” button on your AirPods charging case.
您還可以將AirPods直接與Mac配對。 為此，請轉到系統偏好設置>藍牙。 在這里，請確保已啟用藍牙，然后按住AirPods充電盒上的“設置”按鈕。
After a couple of seconds, you’ll see your AirPods in the Devices list. Here, simply click the “Connect” button.
幾秒鐘后，您將在“設備”列表中看到AirPods。 在這里，只需單擊“連接”按鈕。
You can now connect or disconnect your AirPods from the Bluetooth menu.
現在，您可以從藍牙菜單連接或斷開AirPods的連接。
如何在Apple Watch上使用AirPods或AirPods Pro (How to Use AirPods or AirPods Pro with Apple Watch)
If you’ve paired your AirPods with your iPhone, they’ll be paired to your Apple Watch as well.
如果您已將AirPods與iPhone配對，它們也將與Apple Watch配對。
To use AirPods or AirPods Pro directly with your Apple Watch, go to the wearable’s Control Center, tap the “AirPlay” button, and choose your AirPods.
若要直接在Apple Watch上使用AirPods或AirPods Pro，請轉到可穿戴設備的控制中心，點擊“ AirPlay”按鈕，然后選擇您的AirPods。
You can also bypass your iPhone and pair your AirPods directly to your Apple Watch from the Settings app.
您還可以繞過iPhone，并通過“設置”應用程序將AirPods直接與Apple Watch配對。
如何查找丟失的AirPods或AirPods Pro (How to Find Lost AirPods or AirPods Pro)
Apple’s Find My AirPods tool is directly integrated into the new Find My app on the iPhone. As long as you’re using the Find My iPhone feature, you can use it to track your lost AirPods, too (from the Find My app or from the iCloud website).
Apple的“查找我的AirPods”工具直接集成到iPhone上新的“查找我的”應用程序中。 只要您使用“查找我的iPhone”功能，就可以使用它來跟蹤丟失的AirPods(通過“查找我的應用程序”或iCloud網站)。
To find your lost AirPods or AirPods Pro, open the “Find My” app and choose your AirPods.
要查找丟失的AirPods或AirPods Pro，請打開“查找我”應用并選擇您的AirPods。
From here, you can see the last location where they were connected. If you see a green dot, it means your AirPods are online. A gray dot means that they are offline. Either they are out of range or the battery has died.
從這里，您可以看到它們連接的最后位置。 如果您看到一個綠點，則表明您的AirPods處于在線狀態。 灰色點表示它們已脫機。 它們超出范圍或電池已耗盡。
If you see a green dot, you can play a sound to look for the AirPods nearby. If you can see the last location, tap the “Directions” button to navigate to it.
如果看到綠點，則可以播放聲音以尋找附近的AirPods。 如果您可以看到最后一個位置，請點擊“方向”按鈕導航到該位置。
如何在iPhone或iPad上手動連接到AirPods或AirPods Pro (How to Manually Connect to AirPods or AirPods Pro on iPhone or iPad)
AirPods are supposed to work magically. You put them in your ear, and they’re automatically paired with your iPhone or iPad (whichever is your most recently used device).
AirPods應該可以神奇地工作。 將它們放在耳邊，它們會自動與您的iPhone或iPad(無論是最近使用的設備)配對。
But sometimes, it just doesn’t work. In times like these, when your AirPods or AirPods Pro are already in your ears and the case is back in your pocket, you can use the Control Center.
但是有時候，它只是行不通的。 在這種情況下，當您的AirPods或AirPods Pro已經在您的耳朵中并且手提箱放回口袋時，您可以使用Control Center。
Here, tap the “AirPlay” shortcut from the Now Playing control.
在這里，點擊“正在播放”控件中的“ AirPlay”快捷方式。
From here, choose your AirPods to switch to them.
從這里，選擇您的AirPods來切換到它們。
You can do this from the AirPlay menu from anywhere in the operating system, such as from the lock screen widget or the Music app.
您可以從操作系統中任何位置的AirPlay菜單中執行此操作，例如從鎖屏小部件或“音樂”應用程序中執行。
如何檢查AirPods或AirPods Pro電池壽命 (How to Check AirPods or AirPods Pro Battery Life)
You can check your AirPods battery life from your Apple devices in a couple of ways.
您可以通過兩種方法從Apple設備檢查AirPods電池壽命。
The easiest way is to bring up Siri and asking the virtual assistant something like, “AirPods battery?” and having it read out to you.
最簡單的方法是打開Siri并詢問虛擬助手，例如“ AirPods電池？” 并向您朗讀。
You can also add the Batteries widget to the Today View on iPhone or iPad. From the Today View (swipe paste the left-most Home screen), scroll to the bottom of the list, and then tap the “Edit” button.
您還可以將“電池”小部件添加到iPhone或iPad上的“今日視圖”。 在“今日視圖”中(滑動粘貼最左側的主屏幕)，滾動到列表的底部，然后點擊“編輯”按鈕。
From there, tap the “+” button next to the “Batteries” option to enable the widget.
從那里，點擊“電池”選項旁邊的“ +”按鈕以啟用小部件。
Rearrange the widgets if you want, and then tap the “Done” button.
如果需要，可以重新排列小部件，然后點擊“完成”按鈕。
Now, you’ll be able to see the battery life of your AirPods when they’re connected to your iPhone or iPad.
現在，當AirPods連接到iPhone或iPad時，您將可以看到它們的電池壽命。
如何一次使用兩個AirPods或AirPods Pro (How to Use Two AirPods or AirPods Pro at Once)
If you’re running iOS 13 or iPadOS 13 and above, you can use two sets of AirPods or AirPods Pro with your iPhone or iPad at the same time.
如果您運行的是iOS 13或iPadOS 13及更高版本，則可以同時將兩組AirPods或AirPods Pro與iPhone或iPad一起使用。
There are two ways to do this. The first method is fairly simple. All you have to do is pair the second set of AirPods to your iPhone or iPad following the same process as explained previously.
有兩種方法可以做到這一點。 第一種方法相當簡單。 您所要做的就是按照與前面所述相同的過程將第二組AirPods與iPhone或iPad配對。
From there, you’ll be able to select the second pair of AirPods from the AirPlay menu (found in Control Center) to start playback for both devices.
從那里，您將能夠從AirPlay菜單(位于控制中心中)中選擇第二對AirPods，以開始為這兩個設備播放。
The second option doesn’t require you to pair the second set of AirPods. Using the new Audio Sharing feature in iOS 13.1 and iPadOS 13.1, you can share the audio to a friend’s AirPods via their iPhone or iPad.
第二個選項不需要您配對第二組AirPods。 使用iOS 13.1和iPadOS 13.1中新的音頻共享功能，您可以通過朋友的iPhone或iPad將音頻共享給他們的AirPods。
To do this, go to the AirPlay menu from the Control Center (or from the media app that you’re using) and tap the “Share Audio” button.
為此，請從控制中心(或您正在使用的媒體應用程序)轉到AirPlay菜單，然后點擊“共享音頻”按鈕。
Now, bring the other iPhone or iPad near your device (with the AirPods connected to them). Once you see their device, tap the “Share Audio” button.
現在，將另一部iPhone或iPad靠近您的設備(已連接AirPods)。 看到他們的設備后，請點擊“共享音頻”按鈕。
Once the device is connected, tap the “checkmark” next to it to start playing audio on both devices.
連接設備后，請點擊其旁邊的“對勾”以開始在兩個設備上播放音頻。
如何更新AirPods或AirPods Pro固件 (How to Update AirPods or AirPods Pro Firmware)
To update your AirPods firmware, start by first connecting your AirPods to a power source and then pair them with your iPhone or iPad. As long as your device is nearby, it will automatically download and install any firmware updates in the background.
要更新AirPods固件，請首先將AirPods連接到電源，然后將其與iPhone或iPad配對。 只要您的設備在附近，它將自動在后臺下載并安裝任何固件更新。
Sadly, there is no interface or confirmation for this process. What you can do is check if your AirPods are running the latest firmware. But to do that, first, you have to check online for the latest firmware version.
可悲的是，此過程沒有界面或確認。 您可以做的是檢查AirPods是否正在運行最新的固件。 但是要做到這一點，首先，您必須在線檢查最新的固件版本。
Next, go to Settings > General > About and select your AirPods. Here, take note of the firmware version to see if you have the latest version installed.
接下來，轉到設置>常規>關于，然后選擇您的AirPods。 在這里，記下固件版本以查看是否安裝了最新版本。
Once you start using your AirPods regularly, you’ll notice that they tend to get dirty quite quickly. Here’s how to easily clean your icky AirPods.
一旦您開始定期使用AirPods，您會發現它們往往會很快變臟。 這是如何輕松清潔您討厭的AirPods的方法。
翻譯自: https://www.howtogeek.com/676744/how-to-use-your-airpods-and-airpods-pro-the-complete-guide/
airpods2使用
)
