Chamberlain’s MyQ technology is?great for opening and closing your garage door remotely with your smartphone, but you can also receive alerts whenever your garage door opens and closes (as well as receive alerts when it’s been open for an extended amount of time). Here’s how to enable them.

Chamberlain的MyQ技術非常適合通過智能手機遠程打開和關閉車庫門，但是只要車庫門打開和關閉，您也可以收到警報(以及在車庫門長時間打開時也會收到警報)。 啟用它們的方法如下。

If you don’t have MyQ set up on your smartphone yet, check out our guide on how to set it all up so that you can be up and running in no time. Once you have the app all set up, it’s time to enable the alerts. Here are a few different alerts that you may want to create.

如果您尚未在智能手機上設置MyQ，請查看有關如何全部設置的指南，以便立即啟動并運行。 設置好所有應用程序后，就可以啟用警報了。 這是您可能想要創建的一些不同的警報。

當您的車庫門打開時 (When Your Garage Door Opens)

Open up the MyQ app and tap on the menu button in the top-left corner of the screen (I’m using the Liftmaster MyQ app. It might be slightly different than the Chamberlain MyQ app, but overall it should be very similar).

打開MyQ應用程序，然后點擊屏幕左上角的菜單按鈕(我使用的是Liftmaster MyQ應用程序。它可能與Chamberlain MyQ應用程序略有不同，但是總體上應該非常相似)。

Select “Alerts” from the list.

從列表中選擇“警報”。

Tap on the “+” button in the top-right corner.

點擊右上角的“ +”按鈕。

Tap on “Garage Door” (or whatever you named your garage door when you set it up).

點擊“車庫門”(或設置時命名的車庫門)。

Start by giving the alert a name.

首先給警報命名。

Next, tap on the toggle switch to the right of “Garage door is open” to receive an alert when your garage door opens. Do the same for “Garage door is closed” if you want to receive an alert when your garage door closes.

接下來，點擊“車庫門已打開”右側的撥動開關，以在車庫門打開時收到警報。 如果要在車庫門關閉時收到警報，請對“車庫門關閉”執行相同的操作。

Make sure that “As soon as it happens” is turned on so that you receive the alert right when your garage door opens.

確保打開“一旦發生”，以便您在車庫門打開時立即收到警報。

Further down, tap on the toggle switch next to either “Push notification” or “Email”. A push notification will alert you on your phone.

再往下，點擊“推送通知”或“電子郵件”旁邊的切換開關。 推送通知會在手機上提醒您。

Next, tap “Save” in the top-right corner to save your alert and enable it.

接下來，點擊右上角的“保存”以保存您的警報并啟用它。

The new alert will appear on the Alerts screen where you can disable it and re-enable it at any time.

新警報將顯示在“警報”屏幕上，您可以在其中隨時禁用并重新啟用它。

當車庫門在特定時間內保持打開狀態 (When Your Garage Door Has Remained Open for a Specific Amount of Time)

If you want to receive an alert right when your garage door opens but also another alert whenever it remains open for a specific amount of time, you’ll need to create a second alert on top of the one you just created in the previous section.

如果您想在車庫門打開時立即收到警報，而在車庫門打開一定時間后又收到另一個警報，則需要在上一節中剛剛創建的警報的頂部創建第二個警報。

For this kind of alert, toggle all of the same options except for “As soon as it happens”. This will need to turned off.

對于這種警報，請切換所有相同的選項，但“一旦發生”。 這將需要關閉。

Doing this will show a new option called “For longer than”. Simply select the amount of time your garage door would have to remain open before you receive an alert about it, and then hit “Done”.

這樣做將顯示一個名為“ For than than”的新選項。 只需選擇車庫門在收到警報之前必須保持打開狀態的時間，然后單擊“完成”即可。

如果您只想在特定時間范圍內接收警報 (If You Only Want to Receive Alerts Within a Specific Time Window)

If you’re at home, then you probably don’t care about receiving garage door alerts—it’s really only useful when you’re at work or on vacation, so you can specify certain times and days when you want to receive alerts.

如果您在家中，那么您可能就不在乎收到車庫門警報了-它僅在工作或度假時才有用，因此您可以指定要接收警報的特定時間和日期。

Like the previous alerts, everything will remain the same, but you’ll simply turn off the toggle switch next to “All times and days”.

像以前的警報一樣，所有內容都將保持不變，但是您只需關閉“所有時間和日期”旁邊的切換開關即可。

After that, a new section will appear where you can specify a certain time window, as well as certain days that you want the alert enabled.

此后，將出現一個新部分，您可以在其中指定特定的時間范圍以及希望啟用警報的特定日期。

When you’re done, hit “Save” up in the top-right corner to create your alert. You’re all set!

完成后，點擊右上角的“保存”以創建警報。 你們都準備好了！

翻譯自: https://www.howtogeek.com/288465/how-to-receive-alerts-when-your-garage-door-opens-using-myq/