禁用磁盤檢查_如何在Windows上禁用“磁盤空間不足”警告

禁用磁盤檢查

Windows displays “Low Disk Space” notifications whenever any partition on your computer has less than 200 MB of space remaining. Here’s how to get rid of the notifications, even if you can’t free up the space.

只要計算機上任何分區的剩余空間不足200 MB，Windows都會顯示“磁盤空間不足”通知。即使您無法釋放空間，這也是擺脫通知的方法。

您需要知道的 (What You Need to Know)

If this warning is about your system drive, you should pay attention to it and free up some space. Windows doesn’t function well if your system drive is completely full. You need some free space, although no one can say exactly how much. Many applications won’t run properly and will crash if you have a completely full drive. At any rate, if you’re seeing the warning, you have almost no space left and should probably free some up.

如果此警告與您的系統驅動器有關，則應予以注意并釋放一些空間。如果系統驅動器已滿，則Windows無法正常運行。您需要一些可用空間，盡管沒人能確切說出多少。如果驅動器已滿，許多應用程序將無法正常運行，并且將崩潰。無論如何，如果您看到警告，則幾乎沒有剩余空間，應該釋放一些空間。

However, in some cases, you may see this warning about other, non-system drives. For example, if a recovery partition has a drive letter assigned to it and is almost full, you may see this warning. We recommend hiding the recovery partition if it becomes visible.

但是，在某些情況下，您可能會看到有關其他非系統驅動器的警告。例如，如果恢復分區已分配了驅動器號并且幾乎已滿，則可能會看到此警告。我們建議隱藏恢復分區(如果可見)。

If you have a full data drive and you’re not worried about potential problems or you just don’t want to see this warning, you can disable these notifications.

如果您的數據驅動器已滿，并且不擔心潛在的問題，或者只是不想看到此警告，則可以禁用這些通知。

通過編輯注冊表禁用警告 (Disable the Warning by Editing the Registry)

You can only disable these low disk space messages by changing a setting in the Windows Registry. This is a system-wide change, so Windows won’t warn you about low disk space on any of your drives after you change it.

您只能通過更改Windows注冊表中的設置來禁用這些磁盤空間不足的消息。這是系統范圍的更改，因此Windows更改后不會警告您任何驅動器上的磁盤空間不足。

The below registry hack works on Windows 7, Windows 8, and Windows 10.

以下注冊表黑客可在Windows 7，Windows 8和Windows 10上運行。

Here’s our standard warning: The Registry Editor is a powerful tool and misusing it can render your system unstable or even inoperable. This is a pretty simple hack and, as long as you stick to the instructions, you shouldn’t have any problems. That said, if you’ve never worked with this tool before, consider reading about how to use the Registry Editor before you get started. And definitely back up the Registry (and your computer!) before making changes.

這是我們的標準警告：注冊表編輯器是一個功能強大的工具，濫用它會使您的系統不穩定甚至無法運行。這是一個非常簡單的技巧，只要您按照說明進行操作，就不會有任何問題。就是說，如果您以前從未使用過此工具，請在開始之前考慮閱讀有關如何使用注冊表編輯器的信息。并在進行更改之前一定要備份注冊表(和您的計算機！)。

To get started, launch the Registry Editor by opening the Start menu, typing “regedit” into the search box, and pressing Enter. Click the “Yes” button to give the Registry Editor permission to make changes to your PC.

首先，打開“開始”菜單，在搜索框中鍵入“ regedit”，然后按Enter，啟動注冊表編輯器。單擊“是”按鈕，授予注冊表編輯器權限以對您的PC進行更改。

Use the left sidebar in the Registry Editor window to navigate to the following key. You can also copy and paste the key into the Registry Editor’s address bar if you’re using Windows 10.

使用“注冊表編輯器”窗口中的左側邊欄導航至以下鍵。如果您使用的是Windows 10，也可以將密鑰復制并粘貼到注冊表編輯器的地址欄中。

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

With the Policies key selected in the left pane, right-click in the blank area of the right pane and select New > DWORD (32-bit) Value.

在左窗格中選擇“ Policies鍵后，右鍵單擊右窗格的空白區域，然后選擇“新建”>“ DWORD(32位)值”。

Name the value?NoLowDiscSpaceChecks.

將值命名為NoLowDiscSpaceChecks 。

(Yes, it should technically be spelled “Disk” instead of “Disc,” but that’s the spelling Microsoft requires for this Registry entry.)

(是的，從技術上講，它應拼寫為“ Disk”而不是“ Disc”，但這是Microsoft要求此注冊表項的拼寫。)

Double-click the NoLowDiscSpaceChecks value you just created. Type 1 into the Value Data box, and then click the “OK” button.

雙擊您剛剛創建的NoLowDiscSpaceChecks值。在“數值數據”框中鍵入1 ，然后單擊“確定”按鈕。

You can now close the Registry Editor window. You’ll have to restart your computer before your changes take effect.

現在，您可以關閉“注冊表編輯器”窗口。您必須重新啟動計算機才能使更改生效。

If you want to re-enable the low disk space warnings in the future, return to this location in the Registry, right-click the NoLowDiscSpaceChecks value and select “Delete” to remove it. Restart your PC afterwards.

如果以后希望重新啟用磁盤空間不足的警告，請返回注冊表中的此位置，右鍵單擊NoLowDiscSpaceChecks值，然后選擇“刪除”將其刪除。之后重新啟動計算機。

下載我們的一鍵式注冊表黑客 (Download Our One-Click Registry Hack)

We’ve created some downloadable registry hacks you can use if you don’t want to edit the Registry yourself. One hack disables low disk space checks and the second hack enables them again. Both are included in the following file. Just double-click the one you want to use and agree to add the information to your registry.

我們已經創建了一些可下載的注冊表黑客，如果您不想自己編輯注冊表，可以使用它們。一種黑客禁用磁盤空間不足的檢查，另一種黑客再次啟用磁盤空間檢查。兩者都包含在以下文件中。只需雙擊您要使用的那個，然后同意將信息添加到注冊表中。

Disable Low Disk Space Checks Hacks

禁用磁盤空間不足檢查黑客

You will need to restart your PC for the change to take effect after running either of the above files.

運行以上任何一個文件后，您都需要重新啟動PC才能使更改生效。

These hacks just change the same value we covered above. The “Disable Low Disk Space Checks” file adds the NoLowDiscSpaceChecks value to the Registry and gives it a value of 1 . The “Enable Low Disc Space Checks” file deletes the value from your Registry.

這些hack只是改變了我們上面介紹的值。 “禁用磁盤空間不足檢查”文件將NoLowDiscSpaceChecks值添加到注冊表中，并將其值設置為1 。 “啟用磁盤空間不足檢查”文件從注冊表中刪除該值。

Files with the .reg file extension are just specially formatted text files. You can right-click any .reg file and select “Edit” to see exactly how it works, and anyone can make their own registry hack files.

具有.reg文件擴展名的文件只是特殊格式的文本文件。您可以右鍵單擊任何.reg文件，然后選擇“編輯”以查看其工作原理，任何人都可以制作自己的注冊表hack文件。