ios 拍照 實現 連拍_如何在iOS設備上使用連拍模式拍照

ios 拍照 實現 連拍

ios 拍照 實現 連拍

We’re sure you’ve tried to?capture that?perfect moment with your camera and you’re just a tad too late or too early and you miss it. If you own an iPhone or iPad, you can use burst mode and never miss that perfect shot again.

我們確定您已嘗試用相機捕捉完美的瞬間,而您來得太遲或太早都錯過了。 如果您擁有iPhone或iPad,則可以使用連拍模式,再也不會錯過任何完美拍攝。

One of the biggest problems with digital cameras, or any camera really, is that they’re often ideally suited for taking still photos or portraits. Line everyone up, group them together, and have them say “cheese” and you’re likely to get exactly the photo you want.

數碼相機或其他任何相機的最大問題之一是它們通常非常適合拍攝靜態照片或肖像。 將每個人排隊,將他們分組在一起,然后說“奶酪”,您很可能會準確地得到想要的照片。

Not so much, however, if you’re trying to capture a live moment, such as people or things in action. In such cases, you might try to take several pictures by tapping the shutter button but chances are you will probably miss your shot or it won’t turn how you wanted.

但是,如果您想捕捉實時的時刻,例如人物或活動中的事物,那就不多了。 在這種情況下,您可以嘗試通過點擊快門按鈕拍攝多張照片,但很可能您可能會錯過拍攝機會,否則將無法滿足您的需要。

救援的連拍模式 (Burst Mode to the Rescue)

Burst mode on iOS means that you can point your iPhone or iPad at your subject, hold the shutter button or the volume up button, and it will begin taking one photo after another until you let go.

iOS上的連拍模式意味著您可以將iPhone或iPad對準主體,按住快門按鈕或提高音量按鈕,它將開始一張一張接一張地拍照,直到您放開為止。

You’ll be able to tell burst mode is occurring because you’ll notice that the thumbnail in the lower-right corner will continually change as each photo is taken.
您將能夠知道正在發生連拍模式,因為您會注意到,隨著每張照片的拍攝,右下角的縮略圖將不斷變化。

Unlike the old Camera Roll, the new Photos app doesn’t group burst photos into one single thumbnail. Instead all the photos you took in burst mode will appear separately.

與舊的相機膠卷不同,新的“照片”應用程序不會將連拍照片歸為一個縮略圖。 相反,您在連拍模式下拍攝的所有照片將單獨顯示。

The Photos app doesn’t group bursts of photos, so you will see each one taken separately.
“照片”應用程序不會對多張照片進行分組,因此您會看到每張照片都是分開拍攝的。

You can tap on the first photo in the series (unless you immediately see one you like) and the Photos apps will open to full screen. From here, you can swipe through each photo until you find one or more that genuinely appeal to you.

您可以點按系列中的第一張照片(除非立即看到自己喜歡的照片),然后“照片”應用程序將全屏打開。 在這里,您可以滑動瀏覽每張照片,直到找到真正吸引您的一個或多個。

You can then favorite each photo if you prefer. Once done, tap “Select”, then tap each photo you want to delete, and tap the trash icon in the upper-left corner.

然后,您可以根據需要收藏每張照片。 完成后,點擊“選擇”,然后點擊要刪除的每張照片,然后點擊左上角的垃圾桶圖標。

Tap “Select” and then tap each photo you want to keep or delete. A blue check indicates it’s selected.
點擊“選擇”,然后點擊要保留或刪除的每張照片。 藍色復選標記表示已選中。

When it comes to the photos you do want to keep, you can share them such via AirDrop, Mail, Facebook, or simply print them, among other options.

對于您想要保留的照片,您可以通過AirDrop,Mail,Facebook共享它們,也可以僅打印它們,以及其他選項。

Once you’ve figured out what you want to keep, you can share your photos via AirDrop, a Message, Mail, or any of the other sharing options available at your disposal.
確定要保留的內容后,您可以通過AirDrop,郵件,郵件或其他任何可用的共享選項共享照片。

Burst mode is obviously useful because it eliminates a lot of uncertainty. You won’t be asking, “Did I get I get the shot?” On the other hand, it probably doesn’t make up for trying to be a better photographer. Also, you’re likely to end up with hundreds of extra photos in your camera roll that you will need to later sort out and delete.

突發模式顯然有用,因為它消除了很多不確定性。 您不會問,“我明白了嗎?” 另一方面,它可能并不能彌補自己成為更好的攝影師的不足。 另外,您可能會在相機膠卷中留下數百張額外的照片,以后需要整理和刪除它們。

So, the main takeaway here is use burst mode as needed but only as needed lest you end up filling your iPhone’s storage with unnecessary pictures.

因此,這里的主要要點是根據需要使用連拍模式,但只有在需要時才使用,以免最終使iPhone的存儲空間充滿不必要的圖片。

As always, if you have anything you want to add, such as a comment or question, please leave your feedback in our discussion forum.

與往常一樣,如果您有任何要添加的內容,例如評論或問題,請在我們的論壇中留下您的反饋。

翻譯自: https://www.howtogeek.com/226553/how-to-take-photos-with-burst-mode-on-an-ios-device/

ios 拍照 實現 連拍

本文來自互聯網用戶投稿,該文觀點僅代表作者本人,不代表本站立場。本站僅提供信息存儲空間服務,不擁有所有權,不承擔相關法律責任。
如若轉載,請注明出處:http://www.pswp.cn/news/279890.shtml
繁體地址,請注明出處:http://hk.pswp.cn/news/279890.shtml
英文地址,請注明出處:http://en.pswp.cn/news/279890.shtml

如若內容造成侵權/違法違規/事實不符,請聯系多彩編程網進行投訴反饋email:809451989@qq.com,一經查實,立即刪除!

相關文章

pta l2-6(樹的遍歷)

題目鏈接:https://pintia.cn/problem-sets/994805046380707840/problems/994805069361299456 題意:給出一個二叉樹的結點數目n,后序遍歷序列post,中序遍歷序列in,求其層序遍歷序列。 思路:首先給二叉樹每個…

路由熱備份(HSRP)DynamipsGUI小試牛刀

——好久不見啊,大家最近過的還好嗎?——學而不思則罔,思而不學則殆。好了,既然已經踏上了CCNP之旅,那就和大家一起分享一下學習HSRP的體會吧——在CCNA中我們設計網絡的目的主要是——通!到了CCNP&#xf…

WPF 如何實現簡單放大鏡

WPF 如何實現簡單放大鏡控件名:Magnifier作 者:WPFDevelopersOrg - 驚鏵原文鏈接[1]:https://github.com/WPFDevelopersOrg/WPFDevelopers框架使用.NET40;Visual Studio 2019;實現此功能需要用到 VisualBrush ,放大鏡…

input 禁用智能提示_如何在智能手機上禁用緊急警報

input 禁用智能提示AMBER and emergency alerts occur when there’s a child abduction or there’s an important event such as a severe weather alert (tornado warning) that local governments needs to make people aware of. While we don’t recommend disabling the…

laravel中使用的PDF擴展包——laravel-dompdf和laravel-snappy

這兩天項目中需要將HTML頁面轉換為PDF文件方便打印,我在網上搜了很多資料。先后嘗試了laravel-dompdf和laravel-snappy兩種擴展包,個人感覺laravel-snappy比較好用。 一、使用laravel-dompdf擴展包 1、安裝擴展包 我們通過composer來安裝 composer requi…

「讀懂源碼系列2」我從 lodash 源碼中學到的幾個知識點

前言 上一篇文章 「前端面試題系列8」數組去重(10 種濃縮版) 的最后,簡單介紹了 lodash 中的數組去重方法 _.uniq,它可以實現我們日常工作中的去重需求,能夠去重 NaN,并保留 {...}。 今天要講的,是我從 _.uniq 的源碼實…

有小伙伴問:上位機用QT還是winform/wpf好?

楔子有小伙伴問:上位機用QT還是winform/wpf好?Qt是C寫的,跨平臺的UI框架,Winform/wpf是C#寫的不跨平臺的Windows上運行的UI框架。這兩個說到底是語言本質的爭論或者區別。優點Qt的優點是可以跨平臺運行UI界面,在Linux&…

使用jenkins進行項目的自動構建部署

jenkins 簡介 Jenkins是基于Java開發的一種持續集成工具,用于監控持續重復的工作,功能包括:持續的軟件版本發布/測試項目和監控外部調用執行的工作。 官網地址地址: https://jenkins.io 下載安裝啟動 CentOS 下用yum進行安裝啟動 …

如何刪除Apple Music中的連接功能

Love Apple Music, but tired of the intrusive Connect feature taking up space on your favorite artist’s page? Well, don’t worry, because getting “dis-Connected” is just a matter of changing a few simple settings in your iPhone or iPad running iOS 8.0 o…

python設計模式(十四):模板方法模式

定義一個算法或者流程,部分環節設計為外部可變,用類似于模板的思想來實例化一個實體,可以往模板中填充不同的內容;在模板思想下,實體的整體框架是確定的,他是一個模板,但是模板下內容可變&#…

FirstBird--項目流程

創建項目(英文路徑)—–img圖片文件創建窗體–設置大小(Basic—size–>320*480)—最大化功能禁用(Expert–>setResizable(false))添加面板–設置布局方式(set Layout—>AbsoluteLayout)自己創建面板 GameMain中將Jpanel1改為WinJpanel–創建對應類–>extends JPane…

PeeringDB初探

做網絡相關工作的,可能需要了解PeeringDB這個網站(https://www.peeringdb.com), 這里有大部分公開注冊的 ASN(Autonomous System Number) 以及他們相互直接做Peering的信息,這也是這個網站名字的由來。據統計&#xff…

網站排障分析命令

系統連接狀態篇:1.查看TCP連接狀態netstat-nat|awk{print$6}|sort|uniq-c|sort-rnnetstat-n|awk/^tcp/{print$NF}|sort|uniq-c|sort-rnnetstat-ant|awk{print$NF}|grep-v[a-z]|sort|uniq-c2.查找請求數請20個IP(常用于查找攻來源)&#xff1a…

修復windows臉部識別_如何在Windows 10中改善面部識別

修復windows臉部識別If you have the right hardware, Windows 10 lets you unlock your computer with nothing but a smile. However, Microsoft’s facial recognition isn’t always spot-on. Here’s how to help Windows recognize you better. 如果您擁有合適的硬件&…

使用組策略推送exchange自簽名證書

一、導出證書打開證書頒發機構,在證書服務器上面選屬性,然后按照下圖進行導出操作。 在選擇格式時按照上圖標識選擇。 二、導入證書新建一個組策略,在計算機配置-策略-windows設置-安全設置-公鑰策略中選中“受信任的根證書頒發機構”并新建導…

基于.NetCore開發,前端支持Layui、React、Vue且前后端分離的快速開發框架

今天給大家推薦一個基于.Net Core開發的,前端框架支持Layui、React、Vue,并且前端和后端都支持代碼一鍵生成,用于項目開發,可極大的提升開發效率。項目簡介這是基于.net core的快速開發框架,前端框架可以根據自己需求選…

PHP常用工具方法集...

PHP常用工具方法集&#xff0c;更新時間 2018-7-14 <?php /*** 常用工具方法集* Author: zj*//** 工具總述 1.加密解密 2.生成隨機字符串 3.獲取文件擴展名&#xff08;后綴&#xff09; 4.文件大小格式化 5.替換標簽字符 6.列出目錄下的文件名 7.獲取當前頁面URL 8.讓瀏覽…

一題多解 面試題

最近在其他論壇上看到幾個網友的面試題&#xff0c;這些天&#xff0c;QQ群內的人都在討論怎么解答才最簡單&#xff0c;下面列出題目&#xff1a; 文件a&#xff1a; 文件b: a b c a b c b c a b c a c b a …

什么是Google On.Here,以及如何設置?

Google Wi-Fi is similar to other mesh Wi-Fi systems, but one big feature separates it from the pack: Google On.Here. Google Wi-Fi與其他網狀Wi-Fi系統相似&#xff0c;但其中一個重要功能將其與眾不同&#xff1a;Google On.Here。 發生什么了&#xff1f; (What Is O…

一張圖看懂 SQL 的各種 join 用法

原文鏈接https://www.codeproject.com/Articles/33052/Visual-Representation-of-SQL-Joins 轉載于:https://www.cnblogs.com/xuchao0506/p/10559951.html