dvd vlc 復制

There are many ways to rip a DVD to your computer, but if you’re looking for the most straightforward option, VLC is easy and free. Besides,?you probably already have VLC on your computer (and if you don’t, you should). Here, we’ll show you the quick and easy way to rip DVDs to your computer using VLC.

有很多方法可以將DVD翻錄到計算機上，但是，如果您正在尋找最簡單的選擇，則VLC既簡單又免費。 此外，您的計算機上可能已經裝有VLC(如果沒有，則應該)。 在這里，我們將向您展示使用VLC將DVD翻錄到計算機的快速簡便的方法。

It’s worth noting right off the bat that ripping with VLC comes with a few trade-offs. It doesn’t have as many controls for choosing exactly the right format or adjusting the quality of your rip to save storage space. You can fiddle with it a little, but you’ll have a harder time than you would with an app like Handbrake. However, apps like Handbrake are a bit more?complicated, and require you to download extra software, so if you just want to get that movie on your computer, and don’t care about quality settings, this is a decent free route.

值得注意的是，使用VLC進行撕裂需要付出一些代價。 它沒有太多控件可用于選擇完全正確的格式或調整翻錄質量以節省存儲空間。 您可以稍微擺弄它，但是比起Handbrake之類的應用程序，您會更艱難。 但是，諸如Handbrake之類的應用程序要復雜一些，并且需要您下載其他軟件，因此，如果您只想在計算機上播放該電影，而不關心質量設置，那么這是一個不錯的免費途徑。

使用VLC翻錄DVD (Ripping a DVD Using VLC)

To get started, load up the DVD you want to rip and start up VLC. Then, under Media, click on Convert/Save.

首先，加載要翻錄的DVD并啟動VLC。 然后，在“媒體”下，單擊“轉換/保存”。

The Open Media window will appear and you want to click on the the Disc tab.

將出現“打開媒體”窗口，您想單擊“光盤”選項卡。

Check?the?DVD box, and make sure that the “Disc Device” field?points to your DVD drive. Click the Convert/Save button to rip the DVD.

選中DVD框，并確保“光盤設備”字段指向您的DVD驅動器。 單擊轉換/保存按鈕以翻錄DVD。

You may also want to select?“No disc menus” here, since VLC can occasionally get?tripped up trying to?convert a looping?video menu.

您可能還想在此處選擇“無光盤菜單”，因為VLC有時會在嘗試轉換循環視頻菜單時跳閘。

There are a few other settings here you can tweak, too. Under Starting Position, you can choose which title and chapter you want to rip. If you’re interested in ripping special features, or just part of the movie, you can change these settings, but?if you?just want the movie, you can leave this at the default. Under Audio and Subtitles, you can similarly choose which audio and subtitle track you want to rip. If you’d prefer to grab a language other than the default or include embedded subtitles, you can choose them?here.?To change any of?these four settings,?type in the number of the track, title, or chapter you want to start with. You may need to do some trial and error to figure out which track is the one you want.

您還可以在此處調整其他一些設置。 在開始位置下，您可以選擇要翻錄的標題和章節。 如果您有興趣復制特殊功能或僅是電影的一部分，則可以更改這些設置，但是如果您只想要電影，則可以將其保留為默認設置。 在“音頻和字幕”下，您可以類似地選擇要翻錄的音頻和字幕軌道。 如果您想使用默認語言以外的其他語言或包含嵌入式字幕，則可以在此處進行選擇。 要更改這四個設置中的任何一個，請鍵入要開始的曲目，標題或章節的編號。 您可能需要進行一些反復試驗才能弄清您想要的音軌。

Once you click Convert, you can choose?what type of?codec and container you want to use to encode your rip. By default, VLC will choose an H.264 video codec, MP3 audio format, in an MP4 container. This preset should work?for?any?DVD, but if you want to?change anything, click the Tools icon to the left of the Profile drop down box.

單擊“轉換”后，可以選擇要用于對rip進行編碼的編解碼器和容器的類型。 默認情況下，VLC將在MP4容器中選擇H.264視頻編解碼器，即MP3音頻格式。 該預設適用于任何DVD，但如果要更改任何內容，請單擊“配置文件”下拉框左側的“工具”圖標。

When you’re satisfied with your profile choice (or if you want to stick?with the default), click Browse to pick a name and location for your file.

如果您對配置文件的選擇感到滿意(或者您希望使用默認設置)，請單擊“瀏覽”以選擇文件的名稱和位置。

Pick where you want to output your video file, then give it a name. At the end, be sure to include the file extension (in this case, .mp4). If you don’t include this, VLC?won’t rip?the movie properly. When you’re done, click Save.

選擇您要輸出視頻文件的位置，然后給它起一個名字。 最后，請確保包含文件擴展名(在本例中為.mp4)。 如果您不包括此內容，VLC將無法正確翻錄影片。 完成后，單擊“保存”。

Back on the Convert screen, click Start to begin ripping the movie.

返回“轉換”屏幕，單擊“開始”以開始翻錄影片。

Once it begins, you can see a progress bar along the bottom. Technically, VLC is “streaming” the video to a file on your hard drive, so it will?take?the entire runtime of the movie to rip it. Once the movie?is done (or if you want to stop it early), click the Stop button.

開始后，您會在底部看到一個進度條。 從技術上講，VLC會將視頻“流式傳輸”到硬盤驅動器上的文件中，因此將需要整個電影運行時間才能將其翻錄。 電影播放完成后(或者如果您想提前停止播放)，請單擊“停止”按鈕。

As we said earlier, this isn’t?the most robust way to rip a DVD, but if you just need?to?do a quick rip with the tools you already have on your computer and don’t need to fiddle with codecs or video quality—and don’t want to pay for a better ripping tool—VLC can do it just fine.

如前所述，這不是翻錄DVD的最可靠方法，但是，如果您只需要快速翻錄計算機上已經擁有的工具，而又不需要擺弄編解碼器或視頻質量，并且不想花錢購買更好的翻錄工具-VLC可以做到。

翻譯自: https://www.howtogeek.com/howto/2696/how-to-rip-dvds-with-vlc/

dvd vlc 復制