【關注我，后續持續新增專題博文，謝謝！！！】
上一篇我們講了：
? ? ? ? 這一篇我們開始講：?
目錄
一、場景操作步驟
二、日志基礎關鍵字分級如下
三、場景日志如下：
一、場景操作步驟
操作步驟:
1、打開相機，切換到后置萌拍
2、打開后置補光燈，拍照3次，點擊縮略圖查看相冊
3、退出相機
二、日志基礎關鍵字分級如下
PS：參考：相機Camera日志分析之三十一：高通Camx HAL十種流程基礎分析關鍵字匯總（后續持續更新中）
????????之前有對最普通的場景進行各個日志注釋講解，但相機場景太多，日志差異也巨大。后面將展示各種場景下的日志。
????????通過notepad打開場景下的日志，通過下列分類關鍵字搜索，即可清晰的分析不同場景的相機運行流程差異，日積月累這樣將能快速提升分析日志的能力。
1
三、場景日志如下：
CHIUSECASE: [DEBUG ] cameraextcmd.cpp:698 readSmapsRollup() Pss=169897 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:707 readSmapsRollup() Pss+swap=267793 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:726 getPss() smapsPss=267793 total=267793kb CHIUSECASE: [DEBUG ] cameraextcmd.cpp:698 readSmapsRollup() Pss=169897 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:707 readSmapsRollup() Pss+swap=267793 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:726 getPss() smapsPss=267793 total=267793kb CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhal3module.cpp:545 SetTorchModeInternal() Torch notify state is (inReleaseMode = 0, dropCallbacks = 0) CamX : [ INFO][HAL ] camxhal3module.cpp:545 SetTorchModeInternal() Torch notify state is (inReleaseMode = 0, dropCallbacks = 0) CamX : [ INFO][HAL ] camxhal3module.cpp:545 SetTorchModeInternal() Torch notify state is (inReleaseMode = 0, dropCallbacks = 0) CamX : [ INFO][HAL ] camxhal3module.cpp:545 SetTorchModeInternal() Torch notify state is (inReleaseMode = 0, dropCallbacks = 0) CamX : [HAL ] camxhal3.cpp:540 open() HalOp: Begin OPEN, logicalCameraId: 0, cameraId: 0 CHIUSECASE: [DEBUG ] extensionlayer.cpp:205 ExtendOpen() [OP_EXT] OPEN_CAMERA 0, Sensor lvzhou_imx890 E CHIUSECASE: [DEBUG ] extensionlayer.cpp:211 ExtendOpen() reset plugin CamX : CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:1606 ExtendOpen() Using XML for Logical Cameras -- file: taro_lvzhou.xml CHIUSECASE: [DEBUG ] extensionlayer.cpp:255 ExtendOpen() [OP_EXT] OPEN_CAMERA 0 X CamX : [HAL ] camxhal3module.cpp:1048 ProcessCameraOpen() Number of cameras opened 1 CamX : [ INFO][HAL ] camxhal3.cpp:570 open() Open: overrideCameraClose is 14 , overrideCameraOpen is 1 CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:3108 ConstructDefaultRequestSettings() Override specific tags added to construct default settings CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:3108 ConstructDefaultRequestSettings() Override specific tags added to construct default settings CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:3108 ConstructDefaultRequestSettings() Override specific tags added to construct default settings CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:3108 ConstructDefaultRequestSettings() Override specific tags added to construct default settings CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:3108 ConstructDefaultRequestSettings() Override specific tags added to construct default settings CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:3108 ConstructDefaultRequestSettings() Override specific tags added to construct default settings CamX : [HAL ] camxhal3.cpp:601 open() HalOp: End OPEN, logicalCameraId: 0, cameraId: 0 CamX : [ INFO][HAL ] camxhal3.cpp:1364 initialize() initialize(): 0xb4000079937f2010, 0xb4000079da9f65a0 CamX : [ INFO][HAL ] camxthermalmanager.cpp:112 Initialize() callback already registered CamX : [HAL ] camxthermalmanager.cpp:177 RegisterHALDevice() Registered pHALDevice=0xb4000079937f2000 CameraId=0 CamX : [ INFO][HAL ] camxhal3.cpp:1449 configure_streams() Number of streams: 4 CamX : [HAL ] camxhal3.cpp:1472 configure_streams() HalOp: Begin CONFIG: 0xb4000079937f2010, logicalCameraId: 0, cameraId: 0 CamX : [HAL ] camxhal3.cpp:1495 configure_streams() stream[0] = 0xb400007a0907bb68 - info: CamX : [HAL ] camxhal3.cpp:1498 configure_streams() format : 32, HAL_PIXEL_FORMAT_RAW16 CamX : [HAL ] camxhal3.cpp:1505 configure_streams() stream_type : 00000001, CAMERA3_STREAM_INPUT CamX : [HAL ] camxhal3.cpp:1507 configure_streams() usage : 00000000 CamX : [HAL ] camxhal3.cpp:1509 configure_streams() max_buffers : 0 CamX : [HAL ] camxhal3.cpp:1512 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1515 configure_streams() data_space : 00000000, HAL_DATASPACE_UNKNOWN CamX : [HAL ] camxhal3.cpp:1517 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1520 configure_streams() physical_camera_id : CamX : [HAL ] camxhal3.cpp:1524 configure_streams() groupID : -1 CamX : [HAL ] camxhal3.cpp:1527 configure_streams() reserved[0] : 0x0 CamX : [HAL ] camxhal3.cpp:1529 configure_streams() reserved[1] : 0x0 CamX : [HAL ] camxhal3.cpp:1495 configure_streams() stream[1] = 0xb4000079085f0328 - info: CamX : [HAL ] camxhal3.cpp:1498 configure_streams() format : 35, HAL_PIXEL_FORMAT_YCbCr_420_888 CamX : [HAL ] camxhal3.cpp:1505 configure_streams() stream_type : 00000000, CAMERA3_STREAM_OUTPUT CamX : [HAL ] camxhal3.cpp:1507 configure_streams() usage : 00000103 CamX : [HAL ] camxhal3.cpp:1509 configure_streams() max_buffers : 0 CamX : [HAL ] camxhal3.cpp:1512 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1515 configure_streams() data_space : 08c20000, HAL_DATASPACE_V0_JFIF CamX : [HAL ] camxhal3.cpp:1517 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1520 configure_streams() physical_camera_id : CamX : [HAL ] camxhal3.cpp:1524 configure_streams() groupID : -1 CamX : [HAL ] camxhal3.cpp:1527 configure_streams() reserved[0] : 0x0 CamX : [HAL ] camxhal3.cpp:1529 configure_streams() reserved[1] : 0x0 CamX : [HAL ] camxhal3.cpp:1495 configure_streams() stream[2] = 0xb4000079085f0268 - info: CamX : [HAL ] camxhal3.cpp:1498 configure_streams() format : 32, HAL_PIXEL_FORMAT_RAW16 CamX : [HAL ] camxhal3.cpp:1505 configure_streams() stream_type : 00000000, CAMERA3_STREAM_OUTPUT CamX : [HAL ] camxhal3.cpp:1507 configure_streams() usage : 00000003 CamX : [HAL ] camxhal3.cpp:1509 configure_streams() max_buffers : 0 CamX : [HAL ] camxhal3.cpp:1512 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1515 configure_streams() data_space : 00000001, HAL_DATASPACE_ARBITRARY CamX : [HAL ] camxhal3.cpp:1517 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1520 configure_streams() physical_camera_id : CamX : [HAL ] camxhal3.cpp:1524 configure_streams() groupID : -1 CamX : [HAL ] camxhal3.cpp:1527 configure_streams() reserved[0] : 0x0 CamX : [HAL ] camxhal3.cpp:1529 configure_streams() reserved[1] : 0x0 CamX : [HAL ] camxhal3.cpp:1495 configure_streams() stream[3] = 0xb4000079085f00e8 - info: CamX : [HAL ] camxhal3.cpp:1498 configure_streams() format : 35, HAL_PIXEL_FORMAT_YCbCr_420_888 CamX : [HAL ] camxhal3.cpp:1505 configure_streams() stream_type : 00000000, CAMERA3_STREAM_OUTPUT CamX : [HAL ] camxhal3.cpp:1507 configure_streams() usage : 00000003 CamX : [HAL ] camxhal3.cpp:1509 configure_streams() max_buffers : 0 CamX : [HAL ] camxhal3.cpp:1512 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1515 configure_streams() data_space : 08c20000, HAL_DATASPACE_V0_JFIF CamX : [HAL ] camxhal3.cpp:1517 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1520 configure_streams() physical_camera_id : CamX : [HAL ] camxhal3.cpp:1524 configure_streams() groupID : -1 CamX : [HAL ] camxhal3.cpp:1527 configure_streams() reserved[0] : 0x0 CamX : [HAL ] camxhal3.cpp:1529 configure_streams() reserved[1] : 0x0 CamX : [ INFO][HAL ] camxhal3.cpp:1535 configure_streams() operation_mode: 32769 CamX : [ INFO][HAL ] camxhal3.cpp:1537 configure_streams() multiResolutionInputImage: 0 CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:1346 CheckValidStreamConfig() logical camera id: 0, fwkId: 0, qcfa sensor with size 8192 x 6144 CamX : [HAL ] camxhaldevice.cpp:1508 CheckValidStreamConfig() format:32 max Res(4096 x 3072) requested Res(4096 x 3072) CamX : [CONFIG][HAL ] camxhaldevice.cpp:1114 CheckValidResolution() type:1, width:4096, height:3072, matched:0 CamX : [ INFO][HAL ] camxhaldevice.cpp:1199 CheckValidDepthResolution() Can't find the metadata entry for 1638401 CamX : [ INFO][HAL ] camxhaldevice.cpp:1587 CheckValidStreamConfig() MultiCamStream - validDepthStream 0 validRGBStream 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:1684 CheckValidStreamConfig() Accept raw format:32 (4096 x 3072) CamX : [HAL ] camxhaldevice.cpp:1508 CheckValidStreamConfig() format:35 max Res(4096 x 3072) requested Res(1440 x 1080) CamX : [CONFIG][HAL ] camxhaldevice.cpp:1114 CheckValidResolution() type:0, width:1440, height:1080, matched:1 CamX : [ INFO][HAL ] camxhaldevice.cpp:1199 CheckValidDepthResolution() Can't find the metadata entry for 1638401 CamX : [ INFO][HAL ] camxhaldevice.cpp:1587 CheckValidStreamConfig() MultiCamStream - validDepthStream 0 validRGBStream 1 CamX : [HAL ] camxhaldevice.cpp:1508 CheckValidStreamConfig() format:32 max Res(4096 x 3072) requested Res(4096 x 3072) CamX : [CONFIG][HAL ] camxhaldevice.cpp:1114 CheckValidResolution() type:0, width:4096, height:3072, matched:1 CamX : [ INFO][HAL ] camxhaldevice.cpp:1199 CheckValidDepthResolution() Can't find the metadata entry for 1638401 CamX : [ INFO][HAL ] camxhaldevice.cpp:1587 CheckValidStreamConfig() MultiCamStream - validDepthStream 0 validRGBStream 1 CamX : [HAL ] camxhaldevice.cpp:1508 CheckValidStreamConfig() format:35 max Res(4096 x 3072) requested Res(4096 x 3072) CamX : [CONFIG][HAL ] camxhaldevice.cpp:1114 CheckValidResolution() type:0, width:4096, height:3072, matched:1 CamX : [ INFO][HAL ] camxhaldevice.cpp:1199 CheckValidDepthResolution() Can't find the metadata entry for 1638401 CamX : [ INFO][HAL ] camxhaldevice.cpp:1587 CheckValidStreamConfig() MultiCamStream - validDepthStream 0 validRGBStream 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:1079 InitPackageName() version Fri Feb 14 17:28:20 CST 2025 CHIUSECASE: [DEBUG ] pluginbase.cpp:1900 InitModeDescriptor() [OP_EXT] check CaptureMode : 0x8001 CHIUSECASE: [DEBUG ] pluginbase.cpp:1926 InitModeDescriptor() m_isExplorerDumpEnable 0 CHIUSECASE: [DEBUG ] pluginbase.cpp:1929 InitModeDescriptor() m_is4K120FPSVideoNoFDEnable 0 CHIUSECASE: [DEBUG ] pluginbase.cpp:1942 InitModeDescriptor() isAIVideoUseEIS3 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:2206 InitModeDescriptor() [OP_EXT] Final mode descriptor name: 1 , position type: 1, operation mode: 0x8001 highload 0 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:9230 SetDeviceHDRMode() Set HDR mode to:0 for physical cam:0 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:8854 ConfigureHDRInformation() Logical camera:0 HDRMode set to:0 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:4938 InitializeOverrideSession() m_logicalCameraInfo[0].m_pCamera3Device=0x0, pCamera3Device=0xb4000079937f2010 CHIUSECASE: [DEBUG ] pluginbase.cpp:1287 IsOPZSLStreamConfig() IsOPZSLStreamConfig operation_mode: 32769 CHIUSECASE: [DEBUG ] pluginbase.cpp:1144 OnPostGetMatchingUsecase() ZSL usecase selected CHIUSECASE: [DEBUG ] pluginbase.cpp:1268 OnPostGetMatchingUsecase() [OP_EXT] switch usecaseId 1 to 3 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:4979 InitializeOverrideSession() Session_parameters FPS range 4:30, previewFPS 0, videoFPS 0 BatchSize: 1 HALOutputBufferCombined 0 FPS: 30 SkipPattern: 1, LogicalCameraId = 0 selected use case = 3 count 16 MFHDR_enabled 0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:11796 BuildCameraIdSet() BuildCameraIdSet for logical camera id 0 type 0 numPhyCameras 1 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:11796 BuildCameraIdSet() BuildCameraIdSet for logical camera id 1 type 0 numPhyCameras 1 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:11796 BuildCameraIdSet() BuildCameraIdSet for logical camera id 2 type 0 numPhyCameras 1 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:11796 BuildCameraIdSet() BuildCameraIdSet for logical camera id 3 type 0 numPhyCameras 1 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:11796 BuildCameraIdSet() BuildCameraIdSet for logical camera id 4 type 0 numPhyCameras 2 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:12207 AssignStreamIntentPerFwkStream() Feature2Mapping: Stream Intent 0x40 for 0xb400007a0907bb68 format: 0x20 width: 4096 height: 3072 usage: 0x0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:12207 AssignStreamIntentPerFwkStream() Feature2Mapping: Stream Intent 0x1 for 0xb4000079085f0328 format: 0x23 width: 1440 height: 1080 usage: 0x103 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:12207 AssignStreamIntentPerFwkStream() Feature2Mapping: Stream Intent 0x200 for 0xb4000079085f0268 format: 0x20 width: 4096 height: 3072 usage: 0x3 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:12207 AssignStreamIntentPerFwkStream() Feature2Mapping: Stream Intent 0x2 for 0xb4000079085f00e8 format: 0x23 width: 4096 height: 3072 usage: 0x3 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:596 Initialize() Using non-generated graph and feature descriptors CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:AnchorSync Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:Demux Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:Yuv2Yuv Version: 0:1 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:FrameSelect Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/2] capability string:FUSION Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [1/2] capability string:BOKEH Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/10] capability string:Bayer2Yuv Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [1/10] capability string:FormatConvertor Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [2/10] capability string:YUVReprocess Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [3/10] capability string:Yuv2Yuv Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [4/10] capability string:SWRemosaic Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [5/10] capability string:Y2YRTDiffDimen Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [6/10] capability string:Y2YMultiPreview Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [7/10] capability string:PostFusionIPE Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [8/10] capability string:OfflinePreview Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [9/10] capability string:Y2YPostMFSR Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/3] capability string:HDR Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [1/3] capability string:ThreeFrameMFHDR Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [2/3] capability string:TwoFrameMFHDR Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/2] capability string:MultiCameraReprocessRealtime Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [1/2] capability string:OfflineReprocess Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:Memcpy Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/4] capability string:MFSR Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [1/4] capability string:MFNR Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [2/4] capability string:MFNRV2 Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [3/4] capability string:MMF Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:FeatureMux Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:RawHDR Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:RealTimeSerializer Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/3] capability string:RealTime Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [1/3] capability string:RealTimeNZSL Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [2/3] capability string:RealTimeWithSWRemosaic Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/2] capability string:RealTimeMCX Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [1/2] capability string:RealTimeXR Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:Serializer Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:209 ProbeChiFeature2Features() [0/1] capability string:StatsRegeneration Version: 0:0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RealtimeFG->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->Bayer2YUV->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RTMemcpyYUV->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RTBayer2YUVIdealRaw->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RTBayer2YUVBPSIdealRaw->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RTBayer2YUV->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RTMFSRYUV->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->NONHDRRTMFSRB2YHDRT1YUV->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RealtimeFormatConvertorFG->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->NONHDRRTMFSRB2Y2HDRT1YUV->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RTRawHDRBayer2YUVOEM->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8686 GetAllFeatureGraphDescriptors() Feature2Mapping: Insert single graph:cameraID 0->RTMFSRIPEYUV->0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RealtimeFormatConvertorFG_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RealtimeFG_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RTRawHDRBayer2YUVOEM_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RTMemcpyYUV_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RTMFSRYUV_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RTMFSRIPEYUV_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RTBayer2YUVIdealRaw_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RTBayer2YUVBPSIdealRaw_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'RTBayer2YUV_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'NONHDRRTMFSRB2YHDRT1YUV_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'NONHDRRTMFSRB2Y2HDRT1YUV_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:9321 MapStreamsForGraph() Mapping graph 'Bayer2YUV_0_0' CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:8942 GetFeatureGraphMapforConfig() Config-time stream mapping: Result = 'CDKResultSuccess', Num streams mapped = 3/4, Num graphs mapped = 10/12 CHIUSECASE: [CORE_CFG ] chifeature2graphmanager.cpp:305 Initialize() graph:VirtualSuperGraph,physicalCamID:0,isMultiCamera:0,flags:0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:525 CreateFeatureInstances() :VirtualSuperGraph, numFeatureInstances:7, logicalCameraId:0 CHIUSECASE: [CORE_CFG ] chifeature2realtime.cpp:6077 DoStreamNegotiation() numStream:11 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:735 CreateFeatureInstances() RealTime(0xb4000079a9bf4600) {featureId, instanceId, cameraId, flags}: {0, 0, 0, 0} CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:735 CreateFeatureInstances() AnchorSync(0xb4000079a7acd300) {featureId, instanceId, cameraId, flags}: {15, 0, 0, 0} CHIUSECASE: [DEBUG ] chifeature2generic.cpp:4559 DoStreamNegotiation() AdjustNegotiation by qct flow 0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:735 CreateFeatureInstances() Bayer2Yuv(0xb4000079a9bf4100) {featureId, instanceId, cameraId, flags}: {1, 4, 0, 256} CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:735 CreateFeatureInstances() MMF(0xb4000079daa2b500) {featureId, instanceId, cameraId, flags}: {11, 4, 0, 256} CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:735 CreateFeatureInstances() MMF(0xb4000079daa2ba00) {featureId, instanceId, cameraId, flags}: {11, 0, 0, 0} CHIUSECASE: [DEBUG ] chifeature2generic.cpp:4559 DoStreamNegotiation() AdjustNegotiation by qct flow 0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:735 CreateFeatureInstances() Bayer2Yuv(0xb4000079daa2bf00) {featureId, instanceId, cameraId, flags}: {1, 0, 0, 0} CHIUSECASE: [DEBUG ] chifeature2generic.cpp:4559 DoStreamNegotiation() AdjustNegotiation by qct flow 0 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:735 CreateFeatureInstances() FormatConvertor(0xb4000079daa2c400) {featureId, instanceId, cameraId, flags}: {27, 0, 0, 0} CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1040 FinalizeFeatureInstances() FormatConvertor_0: Backward walk... CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f0268} influences [FormatConvertor:0] Output Port {0, 0, 0} - (Fmt: 0x20 Intent: 512 Dimensions: [4096 x 3072] Usage: 0x3 Dataspace: 1 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:4200 ConfigureFeature() Configure feature for FormatConvertor_0 (status 1) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:5953 PrepareFeatureData() Feature2Mapping: FeatureName = FormatConvertor, numSessions = 1, numPipelines = 1 numPorts = 4 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:6073 PrepareFeatureData() feature: FormatConvertor, session: 0, name: FORMATCONVERTOR, pipeline: 0, name: ZSLSnapshotFormatConvertor CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1158 FinalizeFeatureInstances() [FormatConvertor:0] Input Port {0, 0, 0} influences [RealTime:0] Output Port {0, 0, 1} - (Fmt: 0x20 Intent: 0x200 Dimensions: [4096 x 3072] [4096 x 3072] [4096 x 3072] Usage: 0x0 Maxbuffers: 0) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1040 FinalizeFeatureInstances() Bayer2Yuv_0: Backward walk... CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f00e8} influences [Bayer2Yuv:0] Output Port {0, 0, 0} - (Fmt: 0x23 Intent: 2 Dimensions: [4096 x 3072] Usage: 0x3 Dataspace: 146931712 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f00e8} influences [Bayer2Yuv:0] Output Port {0, 0, 2} - (Fmt: 0x23 Intent: 2 Dimensions: [4096 x 3072] Usage: 0x3 Dataspace: 146931712 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:4200 ConfigureFeature() Configure feature for Bayer2Yuv_0 (status 1) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:5953 PrepareFeatureData() Feature2Mapping: FeatureName = Bayer2Yuv, numSessions = 1, numPipelines = 12 numPorts = 72 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:6073 PrepareFeatureData() feature: Bayer2Yuv, session: 0, name: Bayer2Yuv, pipeline: 0, name: ZSLSnapshotYUVHAL CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:356 CreateDescriptor() Pipeline[ZSLSnapshotFormatConvertor] pipeline pointer 0xb4000079db5f7340 numInputs=1, numOutputs=1 stream w x h: 4096 x 3072 format: 32, numBatchedFrames: 1, HALOutputBufferCombined: 0 maxFPSValue: 30 cameraId: 0 logicalCameraId:0 CamX : [ INFO][HAL ] camxchicontext.cpp:4731 CreatePipelineDescriptor() numBatchedFrames:1 HALOutputBufferCombined:0 maxFPSValue:30 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1158 FinalizeFeatureInstances() [Bayer2Yuv:0] Input Port {0, 0, 0} influences [RealTime:0] Output Port {0, 0, 1} - (Fmt: 0x20 Intent: 0x2 Dimensions: [1296 x 736] [4096 x 3072] [8192 x 6144] Usage: 0x20022 Maxbuffers: 8) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1040 FinalizeFeatureInstances() MMF_0: Backward walk... CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f00e8} influences [MMF:0] Output Port {0, 3, 2} - (Fmt: 0x23 Intent: 2 Dimensions: [4096 x 3072] Usage: 0x3 Dataspace: 146931712 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:4200 ConfigureFeature() Configure feature for MMF_0 (status 1) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:5953 PrepareFeatureData() Feature2Mapping: FeatureName = MMF, numSessions = 1, numPipelines = 4 numPorts = 44 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:6073 PrepareFeatureData() feature: MMF, session: 0, name: MFSR, pipeline: 0, name: MfsrPrefilter CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:6073 PrepareFeatureData() feature: MMF, session: 0, name: MFSR, pipeline: 1, name: MfsrBlend CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:6073 PrepareFeatureData() feature: MMF, session: 0, name: MFSR, pipeline: 2, name: MfsrEqualization CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:6073 PrepareFeatureData() feature: MMF, session: 0, name: MFSR, pipeline: 3, name: MfsrPostFilter CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:356 CreateDescriptor() Pipeline[ZSLSnapshotYUVHAL] pipeline pointer 0xb4000079a71fb2c0 numInputs=1, numOutputs=2 stream w x h: 4096 x 3072 format: 35, numBatchedFrames: 1, HALOutputBufferCombined: 0 maxFPSValue: 30 cameraId: 0 logicalCameraId:0 CamX : [ INFO][HAL ] camxchicontext.cpp:4731 CreatePipelineDescriptor() numBatchedFrames:1 HALOutputBufferCombined:0 maxFPSValue:30 CamX : [CORE ] camxpipeline.cpp:2414 CreateNodes() Topology: Creating Pipeline ZSLSnapshotFormatConvertor_0_cam_0, numNodes 1 isSensorInput 0 isRealTime 0 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::ZSLSnapshotFormatConvertor_BPS0_cam0 has a sink port id 2 using format 10 dim 4096x3072, stream 0xb4000079dabd4880 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::ZSLSnapshotFormatConvertor_0_cam_0 Node::ZSLSnapshotFormatConvertor_BPS0_cam0 Type 65539 numInputPorts 1 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2414 CreateNodes() Topology: Creating Pipeline ZSLSnapshotYUVHAL_0_cam_0, numNodes 2 isSensorInput 0 isRealTime 0 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::ZSLSnapshotYUVHAL_IPE3_cam0 has a sink port id 8 using format 4 dim 4096x3072, stream 0xb4000079dabd4f80 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::ZSLSnapshotYUVHAL_IPE3_cam0 has a sink port id 9 using format 4 dim 4096x3072, stream 0xb4000079db5c2080 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::ZSLSnapshotYUVHAL_0_cam_0 Node::ZSLSnapshotYUVHAL_IPE3_cam0 Type 65538 numInputPorts 4 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::ZSLSnapshotYUVHAL_0_cam_0 Node::ZSLSnapshotYUVHAL_BPS0_cam0 Type 65539 numInputPorts 1 numOutputPorts 4 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[ZSLSnapshotYUVHAL_0_cam_0] Link: Node::ZSLSnapshotYUVHAL_BPS0_cam0(outPort 1) --> (inPort 0) (1 / 4) Node::ZSLSnapshotYUVHAL_IPE3_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[ZSLSnapshotYUVHAL_0_cam_0] Link: Node::ZSLSnapshotYUVHAL_BPS0_cam0(outPort 2) --> (inPort 1) (2 / 4) Node::ZSLSnapshotYUVHAL_IPE3_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[ZSLSnapshotYUVHAL_0_cam_0] Link: Node::ZSLSnapshotYUVHAL_BPS0_cam0(outPort 3) --> (inPort 2) (3 / 4) Node::ZSLSnapshotYUVHAL_IPE3_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[ZSLSnapshotYUVHAL_0_cam_0] Link: Node::ZSLSnapshotYUVHAL_BPS0_cam0(outPort 4) --> (inPort 3) (4 / 4) Node::ZSLSnapshotYUVHAL_IPE3_cam0 using format 18 CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:356 CreateDescriptor() Pipeline[MfsrPostFilter] pipeline pointer 0xb40000791619d000 numInputs=2, numOutputs=2 stream w x h: 4096 x 3072 format: 35, numBatchedFrames: 1, HALOutputBufferCombined: 0 maxFPSValue: 30 cameraId: 0 logicalCameraId:0 CamX : [ INFO][HAL ] camxchicontext.cpp:4731 CreatePipelineDescriptor() numBatchedFrames:1 HALOutputBufferCombined:0 maxFPSValue:30 CamX : [CORE ] camxpipeline.cpp:2414 CreateNodes() Topology: Creating Pipeline MfsrPostFilter_0_cam_0, numNodes 1 isSensorInput 0 isRealTime 0 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPostFilter_IPE3_cam0 has a sink port id 9 using format 4 dim 4096x3072, stream 0xb4000079d5fee300 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPostFilter_IPE3_cam0 has a sink port id 8 using format 4 dim 4096x3072, stream 0xb4000079d5fee380 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrPostFilter_0_cam_0 Node::MfsrPostFilter_IPE3_cam0 Type 65538 numInputPorts 2 numOutputPorts 2 Sensor: Real CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1158 FinalizeFeatureInstances() [MMF:0] Input Port {0, 0, 0} influences [AnchorSync:0] Output Port {0, 0, 0} - (Fmt: 0x20 Intent: 0x2 Dimensions: [1296 x 736] [4096 x 3072] [8192 x 6144] Usage: 0x20000 Maxbuffers: 8) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1040 FinalizeFeatureInstances() MMF_4: Backward walk... CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:4200 ConfigureFeature() Configure feature for MMF_4 (status 1) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1040 FinalizeFeatureInstances() Bayer2Yuv_4: Backward walk... CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:4200 ConfigureFeature() Configure feature for Bayer2Yuv_4 (status 1) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1040 FinalizeFeatureInstances() AnchorSync_0: Backward walk... CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:4200 ConfigureFeature() Configure feature for AnchorSync_0 (status 1) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:5953 PrepareFeatureData() Feature2Mapping: FeatureName = AnchorSync, numSessions = 1, numPipelines = 1 numPorts = 26 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:6073 PrepareFeatureData() feature: AnchorSync, session: 0, name: AnchorSync, pipeline: 0, name: AnchorSync CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1158 FinalizeFeatureInstances() [AnchorSync:0] Input Port {0, 0, 0} influences [RealTime:0] Output Port {0, 0, 1} - (Fmt: 0x20 Intent: 0x2 Dimensions: [1296 x 736] [4096 x 3072] [8192 x 6144] Usage: 0x20022 Maxbuffers: 8) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1158 FinalizeFeatureInstances() [AnchorSync:0] Input Port {0, 0, 1} influences [RealTime:0] Output Port {0, 0, 2} - (Fmt: 0x23 Intent: 0x40 Dimensions: [640 x 480] [640 x 480] [8192 x 6144] Usage: 0x20022 Maxbuffers: 8) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1040 FinalizeFeatureInstances() RealTime_0: Backward walk... CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f0328} influences [RealTime:0] Output Port {0, 0, 0} - (Fmt: 0x23 Intent: 1 Dimensions: [1440 x 1080] Usage: 0x103 Dataspace: 146931712 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f0268} influences [RealTime:0] Output Port {0, 0, 1} - (Fmt: 0x20 Intent: 512 Dimensions: [4096 x 3072] Usage: 0x3 Dataspace: 1 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f0268} influences [RealTime:0] Output Port {0, 0, 4} - (Fmt: 0x20 Intent: 512 Dimensions: [4096 x 3072] Usage: 0x3 Dataspace: 1 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f00e8} influences [RealTime:0] Output Port {0, 0, 6} - (Fmt: 0x23 Intent: 2 Dimensions: [4096 x 3072] Usage: 0x3 Dataspace: 146931712 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1090 FinalizeFeatureInstances() Config Stream {0xb4000079085f0268} influences [RealTime:0] Output Port {0, 0, 14} - (Fmt: 0x20 Intent: 512 Dimensions: [4096 x 3072] Usage: 0x3 Dataspace: 1 Rotation: 0) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:4200 ConfigureFeature() Configure feature for RealTime_0 (status 1) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:5953 PrepareFeatureData() Feature2Mapping: FeatureName = RealTime, numSessions = 1, numPipelines = 28 numPorts = 924 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:6073 PrepareFeatureData() feature: RealTime, session: 0, name: RealTime, pipeline: 0, name: RealTimeFeatureZSLPreviewRaw CHIUSECASE: [CORE_CFG ] chxsensorselectmode.cpp:643 FindBestSensorMode() Camera[0] Desired mode: optimal: [4096x3072] max: [4096x3072] min: [4096x3072] frameRate: 30.000000 sensorModeCaps: 00000001 forceMode:-1 SensorHDRExposureType:0, SensorRemosaicType:0 CHIUSECASE: [CORE_CFG ] chxsensorselectmode.cpp:795 FindBestSensorMode() Camera[0] Selected: modeIndex: 1 Usecase: 8, W=4096, H=3072, FPS:30, NumBatchedFrames:1, caps:9 CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:356 CreateDescriptor() Pipeline[RealTimeFeatureZSLPreviewRaw] pipeline pointer 0xb4000079085eb000 numInputs=0, numOutputs=8 stream w x h: 320 x 240 format: 35, numBatchedFrames: 1, HALOutputBufferCombined: 0 maxFPSValue: 30 cameraId: 0 logicalCameraId:0 CamX : [ INFO][HAL ] camxchicontext.cpp:4731 CreatePipelineDescriptor() numBatchedFrames:1 HALOutputBufferCombined:0 maxFPSValue:30 CamX : [CORE ] camxpipeline.cpp:2414 CreateNodes() Topology: Creating Pipeline RealTimeFeatureZSLPreviewRaw_0_cam_0, numNodes 18 isSensorInput 1 isRealTime 1 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_Sensor0_cam0 Type 0 numInputPorts 0 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_Stats0_cam0 Type 1 numInputPorts 6 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_AWB0_cam0 Type 12 numInputPorts 2 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_Tracker0_cam0 Type 14 numInputPorts 1 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_SALINet0_cam0 Type 16 numInputPorts 1 numOutputPorts 1 Sensor: Real CamX : [ INFO][HAL ] camxchicontext.cpp:4468 InitializeStaticMetadata() Enabled multi camera 1 Logical with front 0 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0 Type 255 numInputPorts 2 numOutputPorts 2 Sensor: Real CamX : [ INFO][HAL ] camxchicontext.cpp:4468 InitializeStaticMetadata() Enabled multi camera 1 Logical with front 0 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 Type 5 numInputPorts 9 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0 has a sink port id 9 using format 10 dim 4096x3072, stream 0xb4000079d5287f00 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0 has a sink port id 4 using format 10 dim 4096x3072, stream 0xb4000079d511e000 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0 Type 65536 numInputPorts 3 numOutputPorts 24 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::RealTimeFeatureZSLPreviewRaw_IPE0_cam0 has a sink port id 9 using format 3 dim 640x480, stream 0xb4000079d511e080 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_IPE0_cam0 Type 65538 numInputPorts 6 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::RealTimeFeatureZSLPreviewRaw_IPE1_cam0 has a sink port id 9 using format 3 dim 320x240, stream 0xb4000079d5287d00 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::RealTimeFeatureZSLPreviewRaw_IPE1_cam0 has a sink port id 8 using format 4 dim 4096x3072, stream 0xb4000079d5287e00 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_IPE1_cam0 Type 65538 numInputPorts 3 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::RealTimeFeatureZSLPreviewRaw_IPE19_cam0 has a sink port id 9 using format 3 dim 640x480, stream 0xb4000079d511e200 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_IPE19_cam0 Type 65538 numInputPorts 1 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::RealTimeFeatureZSLPreviewRaw_IPE2_cam0 has a sink port id 8 using format 3 dim 1440x1080, stream 0xb4000079d5287e80 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_IPE2_cam0 Type 65538 numInputPorts 1 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_FDHw0_cam0 Type 65540 numInputPorts 1 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 Type 65543 numInputPorts 8 numOutputPorts 8 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_FDManager0_cam0 Type 8 numInputPorts 3 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 Type 9 numInputPorts 7 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::RealTimeFeatureZSLPreviewRaw_0_cam_0 Node::RealTimeFeatureZSLPreviewRaw_StatsParse1_cam0 Type 9 numInputPorts 2 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 30) --> (inPort 37) (1 / 6) Node::RealTimeFeatureZSLPreviewRaw_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 36) --> (inPort 76) (2 / 6) Node::RealTimeFeatureZSLPreviewRaw_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 32) --> (inPort 3) (3 / 6) Node::RealTimeFeatureZSLPreviewRaw_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 29) --> (inPort 62) (4 / 6) Node::RealTimeFeatureZSLPreviewRaw_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 12) --> (inPort 7) (5 / 6) Node::RealTimeFeatureZSLPreviewRaw_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 10) --> (inPort 13) (6 / 6) Node::RealTimeFeatureZSLPreviewRaw_Stats0_cam0 using format 9 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 21) --> (inPort 1) (1 / 2) Node::RealTimeFeatureZSLPreviewRaw_AWB0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 29) --> (inPort 62) (2 / 2) Node::RealTimeFeatureZSLPreviewRaw_AWB0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IPE19_cam0(outPort 8) --> (inPort 0) (1 / 1) Node::RealTimeFeatureZSLPreviewRaw_Tracker0_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IPE19_cam0(outPort 8) --> (inPort 0) (1 / 1) Node::RealTimeFeatureZSLPreviewRaw_SALINet0_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 22) --> (inPort 0) (1 / 2) Node::RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 23) --> (inPort 1) (2 / 2) Node::RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 9) --> (inPort 11) (1 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 10 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 30) --> (inPort 37) (2 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 25) --> (inPort 12) (3 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 23 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 27) --> (inPort 14) (4 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 10 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 20) --> (inPort 4) (5 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 23 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 8) --> (inPort 8) (6 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 10 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 33) --> (inPort 63) (7 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 10 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 28) --> (inPort 35) (8 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 10 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 7) --> (inPort 10) (9 / 9) Node::RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 using format 10 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_Sensor0_cam0(outPort 0) --> (inPort 2) (1 / 3) Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0 using format 0 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_Sensor0_cam0(outPort 1) --> (inPort 6) (2 / 3) Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0 using format 0 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_Sensor0_cam0(outPort 1) --> (inPort 3) (3 / 3) Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0 using format 0 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0(outPort 0) --> (inPort 0) (1 / 6) Node::RealTimeFeatureZSLPreviewRaw_IPE0_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0(outPort 1) --> (inPort 1) (2 / 6) Node::RealTimeFeatureZSLPreviewRaw_IPE0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0(outPort 39) --> (inPort 39) (3 / 6) Node::RealTimeFeatureZSLPreviewRaw_IPE0_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0(outPort 40) --> (inPort 40) (4 / 6) Node::RealTimeFeatureZSLPreviewRaw_IPE0_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0(outPort 41) --> (inPort 41) (5 / 6) Node::RealTimeFeatureZSLPreviewRaw_IPE0_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 24) --> (inPort 2) (6 / 6) Node::RealTimeFeatureZSLPreviewRaw_IPE0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 2) --> (inPort 2) (1 / 3) Node::RealTimeFeatureZSLPreviewRaw_IPE1_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 1) --> (inPort 1) (2 / 3) Node::RealTimeFeatureZSLPreviewRaw_IPE1_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 0) --> (inPort 0) (3 / 3) Node::RealTimeFeatureZSLPreviewRaw_IPE1_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 6) --> (inPort 0) (1 / 1) Node::RealTimeFeatureZSLPreviewRaw_IPE19_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 0) --> (inPort 0) (1 / 1) Node::RealTimeFeatureZSLPreviewRaw_IPE2_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IPE19_cam0(outPort 8) --> (inPort 0) (1 / 1) Node::RealTimeFeatureZSLPreviewRaw_FDHw0_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0(outPort 0) --> (inPort 3) (1 / 8) Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0(outPort 1) --> (inPort 5) (2 / 8) Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0(outPort 1) --> (inPort 33) (3 / 8) Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0(outPort 1) --> (inPort 9) (4 / 8) Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0(outPort 2) --> (inPort 6) (5 / 8) Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 using format 14 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0(outPort 36) --> (inPort 34) (6 / 8) Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0(outPort 37) --> (inPort 35) (7 / 8) Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0(outPort 48) --> (inPort 47) (8 / 8) Node::RealTimeFeatureZSLPreviewRaw_EVA0_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IPE19_cam0(outPort 8) --> (inPort 3) (1 / 3) Node::RealTimeFeatureZSLPreviewRaw_FDManager0_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_FDHw0_cam0(outPort 0) --> (inPort 0) (2 / 3) Node::RealTimeFeatureZSLPreviewRaw_FDManager0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_FDHw0_cam0(outPort 2) --> (inPort 2) (3 / 3) Node::RealTimeFeatureZSLPreviewRaw_FDManager0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 30) --> (inPort 35) (1 / 7) Node::RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 21) --> (inPort 1) (2 / 7) Node::RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 36) --> (inPort 61) (3 / 7) Node::RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 32) --> (inPort 3) (4 / 7) Node::RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 29) --> (inPort 36) (5 / 7) Node::RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 19) --> (inPort 9) (6 / 7) Node::RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 12) --> (inPort 7) (7 / 7) Node::RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 32) --> (inPort 20) (1 / 2) Node::RealTimeFeatureZSLPreviewRaw_StatsParse1_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[RealTimeFeatureZSLPreviewRaw_0_cam_0] Link: Node::RealTimeFeatureZSLPreviewRaw_IFE0_cam0(outPort 19) --> (inPort 29) (2 / 2) Node::RealTimeFeatureZSLPreviewRaw_StatsParse1_cam0 using format 6 CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:581 CreateDescriptor() Pipeline[RealTimeFeatureZSLPreviewRaw] Pipeline pointer 0xb4000079085eb000 Selected sensor Mode W=4096, H=3072 Mode=1 CHIUSECASE: [DEBUG ] chxpipeline.cpp:590 CreateDescriptor() [OP_EXT] Realtime SelectedMode W=4096, H=3072, FPS:30, NumBatchedFrames:1, modeIndex:1 CHIUSECASE: ZoomTranslatorProxy::ZoomTranslatorProxy() init CHIUSECASE: [CORE_CFG ] chimcxroitranslator.h:647 ConfigurePhysicalCamIndexMappingFromROITranslatorToLinearMapper() LinearMapper Physical Camera info, LineraMapperIndex:0, physicalCameraIndex:0, subModeIndex:0, adjustratio:1.000000 CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1191 FinalizeFeatureInstances() RealTime_0: Forward walk... CamX : [CORE ] camxresourcemanager.cpp:1229 RegisterClient() Add client {RealTimeFeatureZSLPreviewRaw_0, 0xb4000079d6bdf000, 0, 0}, clients size: 1 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() RealTimeFeatureZSLPreviewRaw_0_cam_0 status is now PipelineStatus::BUFFER_PROPERTIES_FINALIZED CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() RealTimeFeatureZSLPreviewRaw_0_cam_0 status is now PipelineStatus::PRE_FINALIZATION_INPROGRESS CamX : [CORE ] camxsession.cpp:2842 Initialize() Session (0xb4000079d5e0d000) Initialized RealTimeFeatureZSLPreviewRaw CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12304 BuildLinkedPortListForPort() RealTime_0 LinkedPort:pPort_Raw_Out:(0,0,1)->rPort_Raw_Callback[4]:(0,0,4) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12304 BuildLinkedPortListForPort() RealTime_0 LinkedPort:pPort_Raw_Callback:(0,0,4)->rPort_Raw_Out[1]:(0,0,1) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [RealTime:0] Port {0, 0, 0} influences Config Stream {0xb4000079085f0328} - (Usage: 0x20103 MaxBuffers: 8 HALStream: 0xb4000079dab5c908) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1303 FinalizeFeatureInstances() [RealTime:0] Output Port {0, 0, 1} influences [Bayer2Yuv:0] Input Port {0, 0, 0} - (Fmt: 0x20 Dimensions: [4096 x 3072] Usage: 0x20003) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1303 FinalizeFeatureInstances() [RealTime:0] Output Port {0, 0, 1} influences [AnchorSync:0] Input Port {0, 0, 0} - (Fmt: 0x20 Dimensions: [4096 x 3072] Usage: 0x20003) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1303 FinalizeFeatureInstances() [RealTime:0] Output Port {0, 0, 1} influences [FormatConvertor:0] Input Port {0, 0, 0} - (Fmt: 0x20 Dimensions: [4096 x 3072] Usage: 0x20003) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [RealTime:0] Port {0, 0, 1} influences Config Stream {0xb4000079085f0268} - (Usage: 0x20003 MaxBuffers: 8 HALStream: 0xb4000079dab5c788) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1303 FinalizeFeatureInstances() [RealTime:0] Output Port {0, 0, 2} influences [AnchorSync:0] Input Port {0, 0, 1} - (Fmt: 0x23 Dimensions: [640 x 480] Usage: 0x20000) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [RealTime:0] Port {0, 0, 4} influences Config Stream {0xb4000079085f0268} - (Usage: 0x20003 MaxBuffers: 8 HALStream: 0xb4000079dab5c788) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [RealTime:0] Port {0, 0, 6} influences Config Stream {0xb4000079085f00e8} - (Usage: 0x20003 MaxBuffers: 8 HALStream: 0xb4000079dab5c488) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [RealTime:0] Port {0, 0, 14} influences Config Stream {0xb4000079085f0268} - (Usage: 0x20003 MaxBuffers: 8 HALStream: 0xb4000079dab5ca88) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1191 FinalizeFeatureInstances() AnchorSync_0: Forward walk... CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12043 FinalizeInputPorts() AnchorSync_0 AnchorSync_RDIIn0 format mismatch for stream 0xb4000079d5287080 - 0x20 vs 0x20 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12058 FinalizeInputPorts() AnchorSync_0 AnchorSync_RDIIn0 update format/bpp for stream 0xb4000079d5287080 - from [0x20, 0] to [0x20, 10] CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1303 FinalizeFeatureInstances() [AnchorSync:0] Output Port {0, 0, 0} influences [MMF:0] Input Port {0, 0, 0} - (Fmt: 0x20 Dimensions: [4096 x 3072] Usage: 0x20000) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1191 FinalizeFeatureInstances() Bayer2Yuv_4: Forward walk... CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1191 FinalizeFeatureInstances() MMF_4: Forward walk... CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1191 FinalizeFeatureInstances() MMF_0: Forward walk... CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 Prefilter_UBWC_OUT updating stream(0xb4000079db5c2900) dims from [4096 x 3072] to [4096 x 3072], CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 Prefilter_PD10DS4_OUT updating stream(0xb4000079db5c2a00) dims from [4096 x 3072] to [1024 x 768], CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 Prefilter_PD10DS16_OUT updating stream(0xb4000079db5c2a80) dims from [4096 x 3072] to [256 x 192], CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 Prefilter_PD10DS64_OUT updating stream(0xb4000079db5c2b00) dims from [4096 x 3072] to [64 x 48], CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12101 FinalizeInputPorts() MMF_0 Blend_PD10DS4_In updating stream(0xb4000079dcd7dc00) dims from [4096 x 3072] to [1024 x 768] CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12101 FinalizeInputPorts() MMF_0 Blend_PD10DS16_In updating stream(0xb4000079dcd7dc80) dims from [4096 x 3072] to [256 x 192] CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12101 FinalizeInputPorts() MMF_0 Blend_PD10DS64_In updating stream(0xb4000079dcd7dd00) dims from [4096 x 3072] to [64 x 48] CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12101 FinalizeInputPorts() MMF_0 Blend_UBWCNV12-4R_IN updating stream(0xb4000079dcd7d980) dims from [0 x 0] to [1920 x 1440] CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12101 FinalizeInputPorts() MMF_0 BlendInit_BPS_ANC_REG_IN updating stream(0xb4000079dcd7da80) dims from [4096 x 3072] to [1920 x 1440] CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 Blend_UBWC_OUT updating stream(0xb4000079dcd7d500) dims from [4096 x 3072] to [4096 x 3072], CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 Blend_PD10DS4_OUT updating stream(0xb4000079dcd7d680) dims from [4096 x 3072] to [1024 x 768], CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 Blend_ALGM_PLAIN8_Out updating stream(0xb4000079dcd7d700) dims from [4096 x 3072] to [4096 x 3072], CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 Blend_ALGM_PLAIN16_Out updating stream(0xb4000079dcd7d800) dims from [4096 x 3072] to [4096 x 3072], CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12101 FinalizeInputPorts() MMF_0 Equalization_PD10DS4_In updating stream(0xb4000079d5fee080) dims from [4096 x 3072] to [1024 x 768] CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 MFSR_Equalization_UBWC_OUT updating stream(0xb4000079dcd7de80) dims from [4096 x 3072] to [4096 x 3072], CHIUSECASE: [CORE_CFG ] chifeature2hwmultiframe.cpp:3867 OnFinalizePipelineData() MMF:0 MFSR_Equalization_PD10_OUT updating stream(0xb4000079dcd7df00) dims from [4096 x 3072] to [1024 x 768], CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12101 FinalizeInputPorts() MMF_0 Postfilter_PD10DS4_In updating stream(0xb4000079d5fee480) dims from [4096 x 3072] to [1024 x 768] CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [MMF:0] Port {0, 3, 2} influences Config Stream {0xb4000079085f00e8} - (Usage: 0x20003 MaxBuffers: 8 HALStream: 0xb4000079dab23b88) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1191 FinalizeFeatureInstances() Bayer2Yuv_0: Forward walk... CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [Bayer2Yuv:0] Port {0, 0, 0} influences Config Stream {0xb4000079085f00e8} - (Usage: 0x20003 MaxBuffers: 8 HALStream: 0xb400007a09079808) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [Bayer2Yuv:0] Port {0, 0, 2} influences Config Stream {0xb4000079085f00e8} - (Usage: 0x20003 MaxBuffers: 8 HALStream: 0xb400007a09079988) CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:1191 FinalizeFeatureInstances() FormatConvertor_0: Forward walk... CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12043 FinalizeInputPorts() FormatConvertor_0 Input format mismatch for stream 0xb4000079dabd4b00 - 0x20 vs 0x20 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12058 FinalizeInputPorts() FormatConvertor_0 Input update format/bpp for stream 0xb4000079dabd4b00 - from [0x20, 0] to [0x20, 10] CHIUSECASE: [CORE_CFG ] chifeature2featurepool.cpp:977 UpdateConfigStreams() [FormatConvertor:0] Port {0, 0, 0} influences Config Stream {0xb4000079085f0268} - (Usage: 0x20003 MaxBuffers: 8 HALStream: 0xb4000079dab22f88) CHIUSECASE: [CORE_CFG ] chxstreambuffermanager.cpp:342 ConfigureStreams() Add policy for stream 0xb4000079085f0328 opmode 8001 (min,max,batch):(3,6,1) stream max_buffer 8 isPreview 1 isSnapshot 0 isVideo 0 isEIS2 0 isEIS3 0 isHDR10Plus:0 m_mode 2 CHIUSECASE: [CORE_CFG ] chxstreambuffermanager.cpp:342 ConfigureStreams() Add policy for stream 0xb4000079085f0268 opmode 8001 (min,max,batch):(0,8,1) stream max_buffer 8 isPreview 0 isSnapshot 1 isVideo 0 isEIS2 0 isEIS3 0 isHDR10Plus:0 m_mode 2 CHIUSECASE: [CORE_CFG ] chxstreambuffermanager.cpp:342 ConfigureStreams() Add policy for stream 0xb4000079085f00e8 opmode 8001 (min,max,batch):(0,8,1) stream max_buffer 8 isPreview 0 isSnapshot 1 isVideo 0 isEIS2 0 isEIS3 0 isHDR10Plus:0 m_mode 2 CamX : [HAL ] camxhal3.cpp:1568 configure_streams() FINAL stream[0] = 0xb400007a0907bb68 - info: CamX : [HAL ] camxhal3.cpp:1571 configure_streams() format : 32, HAL_PIXEL_FORMAT_RAW16 CamX : [HAL ] camxhal3.cpp:1573 configure_streams() width : 4096 CamX : [HAL ] camxhal3.cpp:1575 configure_streams() height : 3072 CamX : [HAL ] camxhal3.cpp:1578 configure_streams() stream_type : 00000001, CAMERA3_STREAM_INPUT CamX : [HAL ] camxhal3.cpp:1580 configure_streams() usage : 00060000 CamX : [HAL ] camxhal3.cpp:1584 configure_streams() max_buffers : 8 CamX : [HAL ] camxhal3.cpp:1594 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1597 configure_streams() data_space : 00000000, HAL_DATASPACE_UNKNOWN CamX : [HAL ] camxhal3.cpp:1599 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1601 configure_streams() reserved[0] : 0x0 CamX : [HAL ] camxhal3.cpp:1603 configure_streams() reserved[1] : 0x0 CamX : [HAL ] camxhal3.cpp:1568 configure_streams() FINAL stream[1] = 0xb4000079085f0328 - info: CamX : [HAL ] camxhal3.cpp:1571 configure_streams() format : 35, HAL_PIXEL_FORMAT_YCbCr_420_888 CamX : [HAL ] camxhal3.cpp:1573 configure_streams() width : 1440 CamX : [HAL ] camxhal3.cpp:1575 configure_streams() height : 1080 CamX : [HAL ] camxhal3.cpp:1578 configure_streams() stream_type : 00000000, CAMERA3_STREAM_OUTPUT CamX : [HAL ] camxhal3.cpp:1580 configure_streams() usage : 00020103 CamX : [HAL ] camxhal3.cpp:1584 configure_streams() max_buffers : 8 CamX : [HAL ] camxhal3.cpp:1594 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1597 configure_streams() data_space : 08c20000, HAL_DATASPACE_V0_JFIF CamX : [HAL ] camxhal3.cpp:1599 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1601 configure_streams() reserved[0] : 0xb4000079dab5c908 CamX : [HAL ] camxhal3.cpp:1603 configure_streams() reserved[1] : 0x0 CamX : [HAL ] camxhal3.cpp:1618 configure_streams() pHalStream: 0xb4000079dab5c908 format : 0x23, overrideFormat : 0x23 consumer usage: 0, producer usage: 20103 CamX : [HAL ] camxhal3.cpp:1568 configure_streams() FINAL stream[2] = 0xb4000079085f0268 - info: CamX : [HAL ] camxhal3.cpp:1571 configure_streams() format : 32, HAL_PIXEL_FORMAT_RAW16 CamX : [HAL ] camxhal3.cpp:1573 configure_streams() width : 4096 CamX : [HAL ] camxhal3.cpp:1575 configure_streams() height : 3072 CamX : [HAL ] camxhal3.cpp:1578 configure_streams() stream_type : 00000000, CAMERA3_STREAM_OUTPUT CamX : [HAL ] camxhal3.cpp:1580 configure_streams() usage : 00020003 CamX : [HAL ] camxhal3.cpp:1584 configure_streams() max_buffers : 8 CamX : [HAL ] camxhal3.cpp:1594 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1597 configure_streams() data_space : 00000001, HAL_DATASPACE_ARBITRARY CamX : [HAL ] camxhal3.cpp:1599 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1601 configure_streams() reserved[0] : 0xb4000079dab22f88 CamX : [HAL ] camxhal3.cpp:1603 configure_streams() reserved[1] : 0x0 CamX : [HAL ] camxhal3.cpp:1618 configure_streams() pHalStream: 0xb4000079dab22f88 format : 0x20, overrideFormat : 0x20 consumer usage: 0, producer usage: 20003 CamX : [HAL ] camxhal3.cpp:1568 configure_streams() FINAL stream[3] = 0xb4000079085f00e8 - info: CamX : [HAL ] camxhal3.cpp:1571 configure_streams() format : 35, HAL_PIXEL_FORMAT_YCbCr_420_888 CamX : [HAL ] camxhal3.cpp:1573 configure_streams() width : 4096 CamX : [HAL ] camxhal3.cpp:1575 configure_streams() height : 3072 CamX : [HAL ] camxhal3.cpp:1578 configure_streams() stream_type : 00000000, CAMERA3_STREAM_OUTPUT CamX : [HAL ] camxhal3.cpp:1580 configure_streams() usage : 00020003 CamX : [HAL ] camxhal3.cpp:1584 configure_streams() max_buffers : 8 CamX : [HAL ] camxhal3.cpp:1594 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1597 configure_streams() data_space : 08c20000, HAL_DATASPACE_V0_JFIF CamX : [HAL ] camxhal3.cpp:1599 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1601 configure_streams() reserved[0] : 0xb400007a09079988 CamX : [HAL ] camxhal3.cpp:1603 configure_streams() reserved[1] : 0x0 CamX : [HAL ] camxhal3.cpp:1618 configure_streams() pHalStream: 0xb400007a09079988 format : 0x23, overrideFormat : 0x23 consumer usage: 0, producer usage: 20003 CamX : [HAL ] camxhal3.cpp:1635 configure_streams() HalOp: End CONFIG, logicalCameraId: 0, cameraId: 0 CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:356 CreateDescriptor() Pipeline[MfsrPrefilter] pipeline pointer 0xb40000791f7c2fc0 numInputs=1, numOutputs=7 stream w x h: 4096 x 3072 format: 2141391881, numBatchedFrames: 1, HALOutputBufferCombined: 0 maxFPSValue: 30 cameraId: 0 logicalCameraId:0 CamX : [ INFO][HAL ] camxchicontext.cpp:4731 CreatePipelineDescriptor() numBatchedFrames:1 HALOutputBufferCombined:0 maxFPSValue:30 CamX : [CORE ] camxpipeline.cpp:2414 CreateNodes() Topology: Creating Pipeline MfsrPrefilter_0_cam_0, numNodes 3 isSensorInput 0 isRealTime 0 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPrefilter_IPE0_cam0 has a sink port id 10 using format 12 dim 4096x3072, stream 0xb4000079db5c2900 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPrefilter_IPE0_cam0 has a sink port id 11 using format 18 dim 1024x768, stream 0xb4000079db5c2a00 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPrefilter_IPE0_cam0 has a sink port id 12 using format 18 dim 256x192, stream 0xb4000079db5c2a80 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPrefilter_IPE0_cam0 has a sink port id 13 using format 18 dim 64x48, stream 0xb4000079db5c2b00 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrPrefilter_0_cam_0 Node::MfsrPrefilter_IPE0_cam0 Type 65538 numInputPorts 4 numOutputPorts 4 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPrefilter_BPS0_cam0 has a sink port id 7 using format 3 dim 1920x1440, stream 0xb4000079db5c2c00 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrPrefilter_0_cam_0 Node::MfsrPrefilter_BPS0_cam0 Type 65539 numInputPorts 1 numOutputPorts 5 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPrefilter_EVA0_cam0 has a sink port id 1 using format 6 dim 45000x1, stream 0xb4000079db5c2c80 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrPrefilter_EVA0_cam0 has a sink port id 2 using format 14 dim 1920x1440, stream 0xb4000079db5c2f80 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrPrefilter_0_cam_0 Node::MfsrPrefilter_EVA0_cam0 Type 65543 numInputPorts 2 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrPrefilter_0_cam_0] Link: Node::MfsrPrefilter_BPS0_cam0(outPort 1) --> (inPort 0) (1 / 4) Node::MfsrPrefilter_IPE0_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrPrefilter_0_cam_0] Link: Node::MfsrPrefilter_BPS0_cam0(outPort 2) --> (inPort 1) (2 / 4) Node::MfsrPrefilter_IPE0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrPrefilter_0_cam_0] Link: Node::MfsrPrefilter_BPS0_cam0(outPort 3) --> (inPort 2) (3 / 4) Node::MfsrPrefilter_IPE0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrPrefilter_0_cam_0] Link: Node::MfsrPrefilter_BPS0_cam0(outPort 4) --> (inPort 3) (4 / 4) Node::MfsrPrefilter_IPE0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrPrefilter_0_cam_0] Link: Node::MfsrPrefilter_BPS0_cam0(outPort 1) --> (inPort 3) (1 / 2) Node::MfsrPrefilter_EVA0_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrPrefilter_0_cam_0] Link: Node::MfsrPrefilter_BPS0_cam0(outPort 7) --> (inPort 5) (2 / 2) Node::MfsrPrefilter_EVA0_cam0 using format 3 CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:356 CreateDescriptor() Pipeline[MfsrBlend] pipeline pointer 0xb40000794cbc6a80 numInputs=10, numOutputs=6 stream w x h: 4096 x 3072 format: 2141391881, numBatchedFrames: 1, HALOutputBufferCombined: 0 maxFPSValue: 30 cameraId: 0 logicalCameraId:0 CamX : [ INFO][HAL ] camxchicontext.cpp:4731 CreatePipelineDescriptor() numBatchedFrames:1 HALOutputBufferCombined:0 maxFPSValue:30 CamX : [CORE ] camxpipeline.cpp:2414 CreateNodes() Topology: Creating Pipeline MfsrBlend_0_cam_0, numNodes 3 isSensorInput 0 isRealTime 0 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrBlend_IPE1_cam0 has a sink port id 10 using format 12 dim 4096x3072, stream 0xb4000079dcd7d500 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrBlend_IPE1_cam0 has a sink port id 11 using format 18 dim 1024x768, stream 0xb4000079dcd7d680 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrBlend_IPE1_cam0 has a sink port id 10070 using format 1 dim 4096x3072, stream 0xb4000079dcd7d700 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrBlend_IPE1_cam0 has a sink port id 10071 using format 1 dim 4096x3072, stream 0xb4000079dcd7d800 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrBlend_0_cam_0 Node::MfsrBlend_IPE1_cam0 Type 65538 numInputPorts 14 numOutputPorts 4 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrBlend_0_cam_0 Node::MfsrBlend_BPS1_cam0 Type 65539 numInputPorts 1 numOutputPorts 5 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrBlend_EVA1_cam0 has a sink port id 1 using format 6 dim 45000x1, stream 0xb4000079dcd7d880 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrBlend_EVA1_cam0 has a sink port id 2 using format 14 dim 1920x1440, stream 0xb4000079dcd7d900 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrBlend_0_cam_0 Node::MfsrBlend_EVA1_cam0 Type 65543 numInputPorts 7 numOutputPorts 8 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_BPS1_cam0(outPort 1) --> (inPort 0) (1 / 14) Node::MfsrBlend_IPE1_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_BPS1_cam0(outPort 2) --> (inPort 1) (2 / 14) Node::MfsrBlend_IPE1_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_BPS1_cam0(outPort 3) --> (inPort 2) (3 / 14) Node::MfsrBlend_IPE1_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_BPS1_cam0(outPort 4) --> (inPort 3) (4 / 14) Node::MfsrBlend_IPE1_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_EVA1_cam0(outPort 39) --> (inPort 35) (5 / 14) Node::MfsrBlend_IPE1_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_EVA1_cam0(outPort 40) --> (inPort 36) (6 / 14) Node::MfsrBlend_IPE1_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_EVA1_cam0(outPort 41) --> (inPort 37) (7 / 14) Node::MfsrBlend_IPE1_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_EVA1_cam0(outPort 42) --> (inPort 38) (8 / 14) Node::MfsrBlend_IPE1_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_BPS1_cam0(outPort 1) --> (inPort 3) (1 / 7) Node::MfsrBlend_EVA1_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_BPS1_cam0(outPort 7) --> (inPort 5) (2 / 7) Node::MfsrBlend_EVA1_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_EVA1_cam0(outPort 36) --> (inPort 34) (3 / 7) Node::MfsrBlend_EVA1_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrBlend_0_cam_0] Link: Node::MfsrBlend_EVA1_cam0(outPort 37) --> (inPort 35) (4 / 7) Node::MfsrBlend_EVA1_cam0 using format 6 CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:356 CreateDescriptor() Pipeline[MfsrEqualization] pipeline pointer 0xb4000079437a0880 numInputs=3, numOutputs=2 stream w x h: 4096 x 3072 format: 2141391881, numBatchedFrames: 1, HALOutputBufferCombined: 0 maxFPSValue: 30 cameraId: 0 logicalCameraId:0 CamX : [ INFO][HAL ] camxchicontext.cpp:4731 CreatePipelineDescriptor() numBatchedFrames:1 HALOutputBufferCombined:0 maxFPSValue:30 CamX : [CORE ] camxpipeline.cpp:2414 CreateNodes() Topology: Creating Pipeline MfsrEqualization_0_cam_0, numNodes 2 isSensorInput 0 isRealTime 0 CamX : [ INFO][HAL ] camxchicontext.cpp:4468 InitializeStaticMetadata() Enabled multi camera 1 Logical with front 0 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrEqualization_0_cam_0 Node::MfsrEqualization_com.qti.node.memcpy4_cam0 Type 255 numInputPorts 1 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrEqualization_IPE4_cam0 has a sink port id 9 using format 12 dim 4096x3072, stream 0xb4000079dcd7de80 CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::MfsrEqualization_IPE4_cam0 has a sink port id 11 using format 18 dim 1024x768, stream 0xb4000079dcd7df00 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::MfsrEqualization_0_cam_0 Node::MfsrEqualization_IPE4_cam0 Type 65538 numInputPorts 4 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrEqualization_0_cam_0] Link: Node::MfsrEqualization_com.qti.node.memcpy4_cam0(outPort 0) --> (inPort 0) (1 / 4) Node::MfsrEqualization_IPE4_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[MfsrEqualization_0_cam_0] Link: Node::MfsrEqualization_com.qti.node.memcpy4_cam0(outPort 0) --> (inPort 27) (2 / 4) Node::MfsrEqualization_IPE4_cam0 using format 12 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 0, settings 0xb400007935348000, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb400007a09089340, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000079085f0328 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 0 contains 1 output buffers CHIUSECASE: [DEBUG ] BackseatDriver.cpp:383 ExecuteProcessRequest() [OP_EXT] FIRST_FRAME_REQUEST CHIUSECASE: [DEBUG ] BackseatDriver.cpp:1379 SetFrameSkipFlagForIZOOM() [OP_EXT] reset m_LastFrameNumForIZOOMEnd for reconfig or reopen CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 0 enableZSL 0 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrPrefilter_BPS0_cam0 has a source port id 0 using format 10 dim 4096x3072, stream 0xb4000079dcd7d400 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() MfsrPrefilter_0_cam_0 status is now PipelineStatus::BUFFER_PROPERTIES_FINALIZED CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_IPE1_cam0 has a source port id 4 using format 12 dim 4096x3072, stream 0xb4000079dcd7db00 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_IPE1_cam0 has a source port id 5 using format 18 dim 1024x768, stream 0xb4000079dcd7dc00 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_IPE1_cam0 has a source port id 6 using format 18 dim 256x192, stream 0xb4000079dcd7dc80 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_IPE1_cam0 has a source port id 7 using format 18 dim 64x48, stream 0xb4000079dcd7dd00 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_IPE1_cam0 has a source port id 10056 using format 1 dim 4096x3072, stream 0xb4000079dcd7dd80 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_IPE1_cam0 has a source port id 10057 using format 1 dim 4096x3072, stream 0xb4000079dcd7de00 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_BPS1_cam0 has a source port id 0 using format 10 dim 4096x3072, stream 0xb4000079dcd7d580 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_EVA1_cam0 has a source port id 6 using format 14 dim 1920x1440, stream 0xb4000079dcd7d980 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_EVA1_cam0 has a source port id 9 using format 6 dim 45000x1, stream 0xb4000079dcd7da00 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrBlend_EVA1_cam0 has a source port id 33 using format 3 dim 1920x1440, stream 0xb4000079dcd7da80 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() MfsrBlend_0_cam_0 status is now PipelineStatus::BUFFER_PROPERTIES_FINALIZED CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrEqualization_com.qti.node.memcpy4_cam0 has a source port id 0 using format 12 dim 4096x3072, stream 0xb4000079dcd7df80 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrEqualization_IPE4_cam0 has a source port id 1 using format 18 dim 1024x768, stream 0xb4000079d5fee080 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrEqualization_IPE4_cam0 has a source port id 23 using format 1 dim 4096x3072, stream 0xb4000079d5fee100 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() MfsrEqualization_0_cam_0 status is now PipelineStatus::BUFFER_PROPERTIES_FINALIZED CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrPostFilter_IPE3_cam0 has a source port id 0 using format 12 dim 4096x3072, stream 0xb4000079d5fee400 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::MfsrPostFilter_IPE3_cam0 has a source port id 1 using format 18 dim 1024x768, stream 0xb4000079d5fee480 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() MfsrPostFilter_0_cam_0 status is now PipelineStatus::BUFFER_PROPERTIES_FINALIZED CamX : [CORE ] camxsession.cpp:2842 Initialize() Session (0xb40000799320d000) Initialized MfsrPrefilter, MfsrBlend, MfsrEqualization, MfsrPostFilter CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:7332 SetInSensorZoomInfo() [InSensorZoom] cameraId:0 bEnableInSensorZoomMode: 0zoomStatusChanged = 0 requested zoomState: 1 m_inSensorZoomInfo.zoomState 1 appFrameIndex 0 size 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:539 UpdateCameraInfo() update meta ainight.snapshot.size width:4096 height:3072 CamX : CamX : CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12304 BuildLinkedPortListForPort() MMF_0 LinkedPort:pPort_Blend_ALGM_PLAIN8_Out:(0,1,5)->rPort_Blend_EXT_ALGM_PLAIN8_Out[6]:(0,1,6) CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:12304 BuildLinkedPortListForPort() MMF_0 LinkedPort:pPort_Blend_EXT_ALGM_PLAIN8_Out:(0,1,6)->rPort_Blend_ALGM_PLAIN8_Out[5]:(0,1,5) CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 1, settings 0xb400007909488000, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb4000079da21ac60, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000079085f0328 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 1 contains 1 output buffers CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::ZSLSnapshotYUVHAL_BPS0_cam0 has a source port id 0 using format 10 dim 4096x3072, stream 0xb4000079db5c2100 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() ZSLSnapshotYUVHAL_0_cam_0 status is now PipelineStatus::BUFFER_PROPERTIES_FINALIZED CamX : [CORE ] camxsession.cpp:2842 Initialize() Session (0xb4000079a7751000) Initialized ZSLSnapshotYUVHAL CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 1 enableZSL 0 CamX : [CORE ] camxnode.cpp:1003 InitializeSourcePortBufferFormat() Topology: Node::ZSLSnapshotFormatConvertor_BPS0_cam0 has a source port id 0 using format 10 dim 4096x3072, stream 0xb4000079dabd4b00 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() ZSLSnapshotFormatConvertor_0_cam_0 status is now PipelineStatus::BUFFER_PROPERTIES_FINALIZED CamX : [CORE ] camxsession.cpp:2842 Initialize() Session (0xb40000798aa0d000) Initialized ZSLSnapshotFormatConvertor CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:7332 SetInSensorZoomInfo() [InSensorZoom] cameraId:0 bEnableInSensorZoomMode: 0zoomStatusChanged = 0 requested zoomState: 1 m_inSensorZoomInfo.zoomState 1 appFrameIndex 1 size 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:539 UpdateCameraInfo() update meta ainight.snapshot.size width:4096 height:3072 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 2, settings 0xb4000079d7645800, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb400007a09194060, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000079085f0328 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 2 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 2 enableZSL 0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:7332 SetInSensorZoomInfo() [InSensorZoom] cameraId:0 bEnableInSensorZoomMode: 0zoomStatusChanged = 0 requested zoomState: 1 m_inSensorZoomInfo.zoomState 1 appFrameIndex 2 size 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:539 UpdateCameraInfo() update meta ainight.snapshot.size width:4096 height:3072 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 3, settings 0xb400007909488000, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb4000079da21ac60, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000079085f0328 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 3 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 3 enableZSL 0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:7332 SetInSensorZoomInfo() [InSensorZoom] cameraId:0 bEnableInSensorZoomMode: 0zoomStatusChanged = 0 requested zoomState: 1 m_inSensorZoomInfo.zoomState 1 appFrameIndex 3 size 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:539 UpdateCameraInfo() update meta ainight.snapshot.size width:4096 height:3072 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 4, settings 0xb400007909488000, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb4000079da21ac60, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000079085f0328 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 4 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 4 enableZSL 0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:7332 SetInSensorZoomInfo() [InSensorZoom] cameraId:0 bEnableInSensorZoomMode: 0zoomStatusChanged = 0 requested zoomState: 1 m_inSensorZoomInfo.zoomState 1 appFrameIndex 4 size 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:539 UpdateCameraInfo() update meta ainight.snapshot.size width:4096 height:3072 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 5, settings 0xb400007935348000, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb400007a09089340, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000079085f0328 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 5 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 5 enableZSL 0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:7332 SetInSensorZoomInfo() [InSensorZoom] cameraId:0 bEnableInSensorZoomMode: 0zoomStatusChanged = 0 requested zoomState: 1 m_inSensorZoomInfo.zoomState 1 appFrameIndex 5 size 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:539 UpdateCameraInfo() update meta ainight.snapshot.size width:4096 height:3072 CHIUSECASE: [DEBUG ] chifeature2base.cpp:4712 GetRequestTimeout() waitTime:3600, exposureTimeUseBySensor 0, additionalExposureTime 0, totalLongExp 0, maxLivePendingRequests 6 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() RealTimeFeatureZSLPreviewRaw_0_cam_0 status is now PipelineStatus::PRE_FINALIZED CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() RealTimeFeatureZSLPreviewRaw_0_cam_0 status is now PipelineStatus::FINALIZED CHIUSECASE: [CORE_CFG ] chifeature2realtime.cpp:5479 ActivatePipeline() RealTime ActivatePipeline name RealTimeFeatureZSLPreviewRaw HDRExposureType: 0 CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 0 <==> requestId: 1 <==> sequenceId: 0 <==> CSLSyncId: 1 -- RealTimeFeatureZSLPreviewRaw_0_cam_0 isMaster 0 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() RealTimeFeatureZSLPreviewRaw_0_cam_0 status is now PipelineStatus::RESOURCES_ACQUIRED CamX : [ INFO][HAL ] camxsession.cpp:6825 InjectResult() Session 0xb4000079d5e0d000 [RealTimeFeatureZSLPreviewRaw] Inject result added early metadata in result holder for sequence ID : 0 CamX : [CORE ] camxpipeline.cpp:1261 StreamOn() [OP_EXT][RealTimeFeatureZSLPreviewRaw_0_cam_0] StreamingOn for pipeline: 0xb4000079872a5000 with ExposureTimeMs:3200 ExposureTimeStreamOn:3200 hasFlushOccurred: 0 camId=0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_Sensor0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_Stats0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_AWB0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_Tracker0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_SALINet0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_com.qti.node.gme0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_AutoFocus0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_IFE0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_IPE0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_IPE1_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_IPE19_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_IPE2_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_FDHw0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_EVA0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_FDManager0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_StatsParse0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node RealTimeFeatureZSLPreviewRaw_StatsParse1_cam0 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() RealTimeFeatureZSLPreviewRaw_0_cam_0 status is now PipelineStatus::STREAM_ON CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 1 <==> requestId: 2 <==> sequenceId: 1 <==> CSLSyncId: 2 -- RealTimeFeatureZSLPreviewRaw_0_cam_0 isMaster 0 CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 2 <==> requestId: 3 <==> sequenceId: 2 <==> CSLSyncId: 3 -- RealTimeFeatureZSLPreviewRaw_0_cam_0 isMaster 0 CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 3 <==> requestId: 4 <==> sequenceId: 3 <==> CSLSyncId: 4 -- RealTimeFeatureZSLPreviewRaw_0_cam_0 isMaster 0 CamX : [ INFO][HAL ] camxsession.cpp:6825 InjectResult() Session 0xb4000079d5e0d000 [RealTimeFeatureZSLPreviewRaw] Inject result added early metadata in result holder for sequence ID : 1 CamX : [ INFO][HAL ] camxsession.cpp:6825 InjectResult() Session 0xb4000079d5e0d000 [RealTimeFeatureZSLPreviewRaw] Inject result added early metadata in result holder for sequence ID : 2 CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 4 <==> requestId: 5 <==> sequenceId: 4 <==> CSLSyncId: 5 -- RealTimeFeatureZSLPreviewRaw_0_cam_0 isMaster 0 CamX : [ INFO][HAL ] camxpipeline.cpp:4512 SendShutterNotification() requestID 1, HDRFeatureModeInfo 0 m_lastSubmittedShutterRequestId: 0 CamX : [CONFIG][HAL ] camxhaldevice.cpp:839 Notify() type 00000002, frame_number 0, timestamp 127568270536617 CamX : [ INFO][HAL ] camxpipeline.cpp:4659 SendShutterNotification() Shutter for sequence 0 requestID: 1 CamX : [ INFO][HAL ] camxsession.cpp:6825 InjectResult() Session 0xb4000079d5e0d000 [RealTimeFeatureZSLPreviewRaw] Inject result added early metadata in result holder for sequence ID : 3 CHIUSECASE: [DEBUG ] BackseatDriver.cpp:1467 ProcessResult() [OP_EXT] FIRST_FRAME_RESULT_CALLBACK CamX : [ INFO][HAL ] camxhaldevice.cpp:359 ProcessCaptureResult() Returning framework result metadata only for frame: 0, Metadata: 0xb4000079d5026c80 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 0, partial_result 1, result 0xb4000079d5026c80, num_physcam_metadata 0, num_output_buffers 0 CamX : [ INFO][HAL ] camxsession.cpp:5029 ProcessResultMetadata() Finalized metadata result for session RealTimeFeatureZSLPreviewRaw Sequence ID 0 mapped to framework id 0 pipeline 0 reqId 1 CamX : [ INFO][HAL ] camxhaldevice.cpp:359 ProcessCaptureResult() Returning framework result metadata only for frame: 0, Metadata: 0xb4000079d5026c80 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 0, partial_result 2, result 0xb4000079d5026c80, num_physcam_metadata 0, num_output_buffers 0 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 6, settings 0xb400007909488000, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb4000079da21ac60, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000079085f0328 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 6 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 6 enableZSL 0 CHIUSECASE: [CORE_CFG ] chifeature2graphselector.cpp:7332 SetInSensorZoomInfo() [InSensorZoom] cameraId:0 bEnableInSensorZoomMode: 0zoomStatusChanged = 0 requested zoomState: 1 m_inSensorZoomInfo.zoomState 1 appFrameIndex 6 size 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:539 UpdateCameraInfo() update meta ainight.snapshot.size width:4096 height:3072 CHIUSECASE: [DEBUG ] chifeature2base.cpp:4712 GetRequestTimeout() waitTime:3717, exposureTimeUseBySensor 39, additionalExposureTime 117, totalLongExp 0, maxLivePendingRequests 6 CamX : [ INFO][HAL ] camxhaldevice.cpp:342 ProcessCaptureResult() Returning framework result Frame: 0, Metadata: 0x0, Stream 0xb4000079085f0328, Fmt: 35 Width: 1440 Height: 1080 Fence: -1 Status: 0 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 0, partial_result 0, result 0x0, num_physcam_metadata 0, num_output_buffers 1 CamX : [CORE ] camxpipeline.h:2371 SaveFlushInfo() Pipeline:RealTimeFeatureZSLPreviewRaw Saving lastFlushRequestId: 214 flushType: 0 CamX : [CORE ] camxsession.cpp:1266 Flush() Flush took 15 ms. Session (0xb4000079d5e0d000) RealTimeFeatureZSLPreviewRaw CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature RealTime Session RealTime CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000799320d000 MfsrPrefilter, MfsrBlend, MfsrEqualization, MfsrPostFilter CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000799320d000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrPrefilter CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrBlend CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrEqualization CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrPostFilter CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature MMF Session MFSR CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079a7751000 ZSLSnapshotYUVHAL CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079a7751000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() Bayer2Yuv DeActivatePipeline name ZSLSnapshotYUVHAL CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb4000079a77dd100) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature Bayer2Yuv Session Bayer2Yuv CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000798aa0d000 ZSLSnapshotFormatConvertor CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000798aa0d000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() FormatConvertor DeActivatePipeline name ZSLSnapshotFormatConvertor CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb4000079a7dfa040) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature FormatConvertor Session FORMATCONVERTOR CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079d5e0d000 RealTimeFeatureZSLPreviewRaw CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079d5e0d000 CamX : [CORE ] camxpipeline.h:2371 SaveFlushInfo() Pipeline:RealTimeFeatureZSLPreviewRaw Saving lastFlushRequestId: 214 flushType: 0 CamX : [CORE ] camxsession.cpp:1266 Flush() Flush took 1 ms. Session (0xb4000079d5e0d000) RealTimeFeatureZSLPreviewRaw CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature RealTime Session RealTime CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079a7751000 ZSLSnapshotYUVHAL CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079a7751000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() Bayer2Yuv DeActivatePipeline name ZSLSnapshotYUVHAL CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb4000079a77dd100) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature Bayer2Yuv Session Bayer2Yuv CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000798aa0d000 ZSLSnapshotFormatConvertor CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000798aa0d000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() FormatConvertor DeActivatePipeline name ZSLSnapshotFormatConvertor CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb4000079a7dfa040) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature FormatConvertor Session FORMATCONVERTOR CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000799320d000 MfsrPrefilter, MfsrBlend, MfsrEqualization, MfsrPostFilter CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000799320d000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrPrefilter CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrBlend CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrEqualization CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrPostFilter CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature MMF Session MFSR CamX : [HAL ] camxhal3.cpp:1950 flush() HalOp: End FLUSH: 0xb4000079937f2010 with result 0, logicalCameraId: 0, cameraId: 0 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:698 readSmapsRollup() Pss=344475 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:707 readSmapsRollup() Pss+swap=442371 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:726 getPss() smapsPss=442371 total=442371kb CamX : [ INFO][HAL ] camxhal3.cpp:1449 configure_streams() Number of streams: 1 CamX : [HAL ] camxhal3.cpp:1472 configure_streams() HalOp: Begin CONFIG: 0xb4000079937f2010, logicalCameraId: 0, cameraId: 0 CamX : [HAL ] camxhal3.cpp:1495 configure_streams() stream[0] = 0xb4000078e39a6028 - info: CamX : [HAL ] camxhal3.cpp:1498 configure_streams() format : 35, HAL_PIXEL_FORMAT_YCbCr_420_888 CamX : [HAL ] camxhal3.cpp:1505 configure_streams() stream_type : 00000000, CAMERA3_STREAM_OUTPUT CamX : [HAL ] camxhal3.cpp:1507 configure_streams() usage : 00000103 CamX : [HAL ] camxhal3.cpp:1509 configure_streams() max_buffers : 0 CamX : [HAL ] camxhal3.cpp:1512 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1515 configure_streams() data_space : 08c20000, HAL_DATASPACE_V0_JFIF CamX : [HAL ] camxhal3.cpp:1517 configure_streams() priv : 0x0 CamX : [HAL ] camxhal3.cpp:1520 configure_streams() physical_camera_id : CamX : [HAL ] camxhal3.cpp:1524 configure_streams() groupID : -1 CamX : [HAL ] camxhal3.cpp:1527 configure_streams() reserved[0] : 0x0 CamX : [HAL ] camxhal3.cpp:1529 configure_streams() reserved[1] : 0x0 CamX : [ INFO][HAL ] camxhal3.cpp:1535 configure_streams() operation_mode: 32782 CamX : [ INFO][HAL ] camxhal3.cpp:1537 configure_streams() multiResolutionInputImage: 0 CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:1346 CheckValidStreamConfig() logical camera id: 0, fwkId: 0, qcfa sensor with size 8192 x 6144 CamX : [HAL ] camxhaldevice.cpp:1508 CheckValidStreamConfig() format:35 max Res(4096 x 3072) requested Res(1440 x 1080) CamX : [CONFIG][HAL ] camxhaldevice.cpp:1114 CheckValidResolution() type:0, width:1440, height:1080, matched:1 CamX : [ INFO][HAL ] camxhaldevice.cpp:1199 CheckValidDepthResolution() Can't find the metadata entry for 1638401 CamX : [ INFO][HAL ] camxhaldevice.cpp:1587 CheckValidStreamConfig() MultiCamStream - validDepthStream 0 validRGBStream 1 CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079d5e0d000 RealTimeFeatureZSLPreviewRaw CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079d5e0d000 CamX : [CORE ] camxpipeline.h:2371 SaveFlushInfo() Pipeline:RealTimeFeatureZSLPreviewRaw Saving lastFlushRequestId: 214 flushType: 0 CamX : [CORE ] camxsession.cpp:1266 Flush() Flush took 0 ms. Session (0xb4000079d5e0d000) RealTimeFeatureZSLPreviewRaw CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature RealTime Session RealTime CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000799320d000 MfsrPrefilter, MfsrBlend, MfsrEqualization, MfsrPostFilter CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000799320d000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrPrefilter CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrBlend CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrEqualization CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() MMF DeActivatePipeline name MfsrPostFilter CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb40000794d64ee40) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature MMF Session MFSR CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079a7751000 ZSLSnapshotYUVHAL CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079a7751000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() Bayer2Yuv DeActivatePipeline name ZSLSnapshotYUVHAL CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb4000079a77dd100) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature Bayer2Yuv Session Bayer2Yuv CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000798aa0d000 ZSLSnapshotFormatConvertor CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000798aa0d000 CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:15659 DeActivatePipeline() FormatConvertor DeActivatePipeline name ZSLSnapshotFormatConvertor CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 0, StreamOffPipeline: 0xb4000079a7dfa040) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:1072 ExecuteFlushHelper() pSessionData isFlushInProgress FALSE Feature FormatConvertor Session FORMATCONVERTOR CHIUSECASE: [CORE_CFG ] chifeature2base.cpp:5521 AsyncDestroyJobs() DeActivatePipeline name RealTimeFeatureZSLPreviewRaw CamX : [CORE ] camxsession.cpp:10744 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to TRUE (Fwk Frame Num: 213, StreamOffPipeline: 0xb4000079d47fe940) CamX : [CORE ] camxsession.cpp:10750 SetStreamOffPipelineSync() Set Stream Off Pipeline Sync to FALSE CamX : [CORE ] camxpipeline.cpp:1480 StreamOff() [OP_EXT]RealTimeFeatureZSLPreviewRaw_0_cam_0 Streaming Off successful:0xb4000079872a5000, last request id 214 is real time 1 cam Id: 0 mode : 1 hasFlushOccurred: 0 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() RealTimeFeatureZSLPreviewRaw_0_cam_0 status is now PipelineStatus::STREAM_OFF CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() RealTimeFeatureZSLPreviewRaw_0_cam_0 status is now PipelineStatus::RESOURCES_RELEASED CamX : CamX : CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079d5e0d000 RealTimeFeatureZSLPreviewRaw CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079d5e0d000 CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079d5e0d000 RealTimeFeatureZSLPreviewRaw CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079d5e0d000 CamX : [CORE ] camxsession.cpp:1372 Destroy() exit Bad file descriptor camera 0 thread 2841640112 CamX : [CORE ] camxsession.cpp:1707 Destroy() Session (0xb4000079d5e0d000) Destroy RealTimeFeatureZSLPreviewRaw CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000799320d000 MfsrPrefilter, MfsrBlend, MfsrEqualization, MfsrPostFilter CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000799320d000 CamX : [CORE ] camxpipeline.cpp:270 Destroy() Destroying RealTimeFeatureZSLPreviewRaw_0 CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000799320d000 MfsrPrefilter, MfsrBlend, MfsrEqualization, MfsrPostFilter CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000799320d000 CamX : [CORE ] camxsession.cpp:1707 Destroy() Session (0xb40000799320d000) Destroy MfsrPrefilter, MfsrBlend, MfsrEqualization, MfsrPostFilter CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079a7751000 ZSLSnapshotYUVHAL CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079a7751000 CamX : [CORE ] camxpipeline.cpp:270 Destroy() Destroying MfsrPrefilter_0 CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079a7751000 ZSLSnapshotYUVHAL CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079a7751000 CamX : [CORE ] camxsession.cpp:1707 Destroy() Session (0xb4000079a7751000) Destroy ZSLSnapshotYUVHAL CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000798aa0d000 ZSLSnapshotFormatConvertor CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000798aa0d000 CamX : [CORE ] camxpipeline.cpp:270 Destroy() Destroying MfsrBlend_1 CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb40000798aa0d000 ZSLSnapshotFormatConvertor CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb40000798aa0d000 CamX : [CORE ] camxsession.cpp:1707 Destroy() Session (0xb40000798aa0d000) Destroy ZSLSnapshotFormatConvertor CamX : [CORE ] camxpipeline.cpp:270 Destroy() Destroying MfsrEqualization_2 CamX : [CORE ] camxpipeline.cpp:270 Destroy() Destroying MfsrPostFilter_3 CamX : [CORE ] camxpipeline.cpp:270 Destroy() Destroying ZSLSnapshotYUVHAL_0 CamX : [CORE ] camxpipeline.cpp:270 Destroy() Destroying ZSLSnapshotFormatConvertor_0 CamX : [ INFO][HAL ] camxchicontext.cpp:4372 ReleaseGlobalUsecaseMetadataPool() Invalidate Global usecase pool for id 0 CHIUSECASE: ZoomTranslatorProxy::~ZoomTranslatorProxy() CamX : [CONFIG][CORE ] camxpipeline.cpp:3467 DestroyNodes() Trigger restart clients to resource manager CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:5397 TeardownOverrideSession() clear m_logicalCameraInfo[0].m_pCamera3Device=0xb4000079937f2010 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:6277 RequestThreadProcessing() Terminating recovery thread for logical cameraId: 0 CHIUSECASE: [DEBUG ] extensionlayer.cpp:860 TeardownOverrideSession() [OP_EXT] DESTROY_SESSION X CHIUSECASE: [DEBUG ] pluginbase.cpp:1079 InitPackageName() version Fri Feb 14 17:28:20 CST 2025 CHIUSECASE: [DEBUG ] pluginbase.cpp:1900 InitModeDescriptor() [OP_EXT] check CaptureMode : 0x800e CHIUSECASE: [DEBUG ] pluginbase.cpp:1926 InitModeDescriptor() m_isExplorerDumpEnable 0 CHIUSECASE: [DEBUG ] pluginbase.cpp:1929 InitModeDescriptor() m_is4K120FPSVideoNoFDEnable 0 CHIUSECASE: [DEBUG ] pluginbase.cpp:1942 InitModeDescriptor() isAIVideoUseEIS3 1 CHIUSECASE: [DEBUG ] pluginbase.cpp:2206 InitModeDescriptor() [OP_EXT] Final mode descriptor name: 0 , position type: 1, operation mode: 0x800e highload 0 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:9230 SetDeviceHDRMode() Set HDR mode to:0 for physical cam:0 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:8854 ConfigureHDRInformation() Logical camera:0 HDRMode set to:0 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:4938 InitializeOverrideSession() m_logicalCameraInfo[0].m_pCamera3Device=0x0, pCamera3Device=0xb4000079937f2010 CHIUSECASE: [CORE_CFG ] chxusecaseutils.cpp:1570 GetMatchingUsecase() Default usecase selected CHIUSECASE: [DEBUG ] pluginbase.cpp:1287 IsOPZSLStreamConfig() IsOPZSLStreamConfig operation_mode: 32782 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:4979 InitializeOverrideSession() Session_parameters FPS range 4:30, previewFPS 0, videoFPS 0 BatchSize: 1 HALOutputBufferCombined 0 FPS: 30 SkipPattern: 1, LogicalCameraId = 0 selected use case = 1 count 17 MFHDR_enabled 0 CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:356 CreateDescriptor() Pipeline[Preview] pipeline pointer 0xb40000798bb98000 numInputs=0, numOutputs=1 stream w x h: 1440 x 1080 format: 35, numBatchedFrames: 1, HALOutputBufferCombined: 0 maxFPSValue: 30 cameraId: 0 logicalCameraId:0 CamX : [ INFO][HAL ] camxchicontext.cpp:4731 CreatePipelineDescriptor() numBatchedFrames:1 HALOutputBufferCombined:0 maxFPSValue:30 CamX : [CORE ] camxpipeline.cpp:2414 CreateNodes() Topology: Creating Pipeline Preview_0_cam_0, numNodes 11 isSensorInput 1 isRealTime 1 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_Sensor0_cam0 Type 0 numInputPorts 0 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_Stats0_cam0 Type 1 numInputPorts 4 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_AWB0_cam0 Type 12 numInputPorts 2 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_AutoFocus0_cam0 Type 5 numInputPorts 5 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_IFE0_cam0 Type 65536 numInputPorts 3 numOutputPorts 17 Sensor: Real CamX : [CORE ] camxnode.cpp:839 InitializeSinkPortBufferProperties() Topology: Node::Preview_IPE0_cam0 has a sink port id 8 using format 4 dim 1440x1080, stream 0xb4000078e39a6028 CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_IPE0_cam0 Type 65538 numInputPorts 6 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_IPE19_cam0 Type 65538 numInputPorts 1 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_FDHw0_cam0 Type 65540 numInputPorts 1 numOutputPorts 2 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_EVA0_cam0 Type 65543 numInputPorts 8 numOutputPorts 8 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_FDManager0_cam0 Type 8 numInputPorts 3 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2505 CreateNodes() Topology::Preview_0_cam_0 Node::Preview_StatsParse0_cam0 Type 9 numInputPorts 7 numOutputPorts 1 Sensor: Real CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 30) --> (inPort 37) (1 / 4) Node::Preview_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 36) --> (inPort 76) (2 / 4) Node::Preview_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 29) --> (inPort 62) (3 / 4) Node::Preview_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 12) --> (inPort 7) (4 / 4) Node::Preview_Stats0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 29) --> (inPort 62) (1 / 2) Node::Preview_AWB0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 21) --> (inPort 1) (2 / 2) Node::Preview_AWB0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 7) --> (inPort 10) (1 / 5) Node::Preview_AutoFocus0_cam0 using format 10 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 30) --> (inPort 37) (2 / 5) Node::Preview_AutoFocus0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 25) --> (inPort 12) (3 / 5) Node::Preview_AutoFocus0_cam0 using format 23 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 20) --> (inPort 4) (4 / 5) Node::Preview_AutoFocus0_cam0 using format 23 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 9) --> (inPort 8) (5 / 5) Node::Preview_AutoFocus0_cam0 using format 10 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_Sensor0_cam0(outPort 0) --> (inPort 2) (1 / 3) Node::Preview_IFE0_cam0 using format 0 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_Sensor0_cam0(outPort 1) --> (inPort 6) (2 / 3) Node::Preview_IFE0_cam0 using format 0 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_Sensor0_cam0(outPort 1) --> (inPort 4) (3 / 3) Node::Preview_IFE0_cam0 using format 0 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 22) --> (inPort 0) (1 / 6) Node::Preview_IPE0_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 23) --> (inPort 1) (2 / 6) Node::Preview_IPE0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 24) --> (inPort 2) (3 / 6) Node::Preview_IPE0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_EVA0_cam0(outPort 39) --> (inPort 39) (4 / 6) Node::Preview_IPE0_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_EVA0_cam0(outPort 40) --> (inPort 40) (5 / 6) Node::Preview_IPE0_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_EVA0_cam0(outPort 41) --> (inPort 41) (6 / 6) Node::Preview_IPE0_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 6) --> (inPort 0) (1 / 1) Node::Preview_IPE19_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IPE19_cam0(outPort 8) --> (inPort 0) (1 / 1) Node::Preview_FDHw0_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 0) --> (inPort 3) (1 / 8) Node::Preview_EVA0_cam0 using format 12 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 1) --> (inPort 5) (2 / 8) Node::Preview_EVA0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 1) --> (inPort 33) (3 / 8) Node::Preview_EVA0_cam0 using format 18 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_EVA0_cam0(outPort 1) --> (inPort 9) (4 / 8) Node::Preview_EVA0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_EVA0_cam0(outPort 2) --> (inPort 6) (5 / 8) Node::Preview_EVA0_cam0 using format 14 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_EVA0_cam0(outPort 36) --> (inPort 34) (6 / 8) Node::Preview_EVA0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_EVA0_cam0(outPort 37) --> (inPort 35) (7 / 8) Node::Preview_EVA0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_EVA0_cam0(outPort 48) --> (inPort 47) (8 / 8) Node::Preview_EVA0_cam0 using format 32 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IPE19_cam0(outPort 8) --> (inPort 3) (1 / 3) Node::Preview_FDManager0_cam0 using format 3 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_FDHw0_cam0(outPort 0) --> (inPort 0) (2 / 3) Node::Preview_FDManager0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_FDHw0_cam0(outPort 2) --> (inPort 2) (3 / 3) Node::Preview_FDManager0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 30) --> (inPort 35) (1 / 7) Node::Preview_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 36) --> (inPort 61) (2 / 7) Node::Preview_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 29) --> (inPort 36) (3 / 7) Node::Preview_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 19) --> (inPort 9) (4 / 7) Node::Preview_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 21) --> (inPort 1) (5 / 7) Node::Preview_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 32) --> (inPort 3) (6 / 7) Node::Preview_StatsParse0_cam0 using format 6 CamX : [CORE ] camxpipeline.cpp:2616 CreateNodes() Topology: Pipeline[Preview_0_cam_0] Link: Node::Preview_IFE0_cam0(outPort 12) --> (inPort 7) (7 / 7) Node::Preview_StatsParse0_cam0 using format 6 CHIUSECASE: [CORE_CFG ] chxpipeline.cpp:581 CreateDescriptor() Pipeline[Preview] Pipeline pointer 0xb40000798bb98000 Selected sensor Mode W=4096, H=3072 Mode=1 CHIUSECASE: [DEBUG ] chxpipeline.cpp:590 CreateDescriptor() [OP_EXT] Realtime SelectedMode W=4096, H=3072, FPS:30, NumBatchedFrames:1, modeIndex:1 CamX : [CORE ] camxresourcemanager.cpp:1229 RegisterClient() Add client {Preview_0, 0xb4000079a79ec000, 0, 0}, clients size: 1 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() Preview_0_cam_0 status is now PipelineStatus::BUFFER_PROPERTIES_FINALIZED CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() Preview_0_cam_0 status is now PipelineStatus::PRE_FINALIZATION_INPROGRESS CamX : [CORE ] camxsession.cpp:2842 Initialize() Session (0xb40000799320d000) Initialized Preview CHIUSECASE: [CORE_CFG ] chxstreambuffermanager.cpp:342 ConfigureStreams() Add policy for stream 0xb4000078e39a6028 opmode 800e (min,max,batch):(3,6,1) stream max_buffer 8 isPreview 1 isSnapshot 0 isVideo 0 isEIS2 0 isEIS3 0 isHDR10Plus:0 m_mode 2 CamX : [HAL ] camxhal3.cpp:1568 configure_streams() FINAL stream[0] = 0xb4000078e39a6028 - info: CamX : [HAL ] camxhal3.cpp:1571 configure_streams() format : 35, HAL_PIXEL_FORMAT_YCbCr_420_888 CamX : [HAL ] camxhal3.cpp:1573 configure_streams() width : 1440 CamX : [HAL ] camxhal3.cpp:1575 configure_streams() height : 1080 CamX : [HAL ] camxhal3.cpp:1578 configure_streams() stream_type : 00000000, CAMERA3_STREAM_OUTPUT CamX : [HAL ] camxhal3.cpp:1580 configure_streams() usage : 00020103 CamX : [HAL ] camxhal3.cpp:1584 configure_streams() max_buffers : 8 CamX : [HAL ] camxhal3.cpp:1594 configure_streams() rotation : 00000000, CAMERA3_STREAM_ROTATION_0 CamX : [HAL ] camxhal3.cpp:1597 configure_streams() data_space : 08c20000, HAL_DATASPACE_V0_JFIF CamX : [HAL ] camxhal3.cpp:1599 configure_streams() priv : 0xb40000794379bb00 CamX : [HAL ] camxhal3.cpp:1601 configure_streams() reserved[0] : 0xb40000794379bb08 CamX : [HAL ] camxhal3.cpp:1603 configure_streams() reserved[1] : 0x0 CamX : [HAL ] camxhal3.cpp:1618 configure_streams() pHalStream: 0xb40000794379bb08 format : 0x23, overrideFormat : 0x23 consumer usage: 0, producer usage: 20103 CamX : [HAL ] camxhal3.cpp:1635 configure_streams() HalOp: End CONFIG, logicalCameraId: 0, cameraId: 0 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() Preview_0_cam_0 status is now PipelineStatus::PRE_FINALIZED CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 215, settings 0xb40000794d71a800, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb400007993183bc0, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000078e39a6028 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 215 contains 1 output buffers CHIUSECASE: [DEBUG ] BackseatDriver.cpp:383 ExecuteProcessRequest() [OP_EXT] FIRST_FRAME_REQUEST CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 215 enableZSL 0 CHIUSECASE: [REQMAP ] chxadvancedcamerausecase.cpp:3913 ExecuteCaptureRequest() frame: 215 <==> (chiFrameNum) chiOverrideFrameNum: 0 CamX : CamX : CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() Preview_0_cam_0 status is now PipelineStatus::FINALIZED CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 0 <==> requestId: 1 <==> sequenceId: 0 <==> CSLSyncId: 215 -- Preview_0_cam_0 isMaster 0 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() Preview_0_cam_0 status is now PipelineStatus::RESOURCES_ACQUIRED CHIUSECASE: [DEBUG ] BackseatDriver.cpp:1467 ProcessResult() [OP_EXT] FIRST_FRAME_RESULT_CALLBACK CamX : [ INFO][HAL ] camxhaldevice.cpp:359 ProcessCaptureResult() Returning framework result metadata only for frame: 215, Metadata: 0xb4000079a7ad08c0 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 215, partial_result 1, result 0xb4000079a7ad08c0, num_physcam_metadata 0, num_output_buffers 0 CamX : [ INFO][HAL ] camxsession.cpp:6825 InjectResult() Session 0xb40000799320d000 [Preview] Inject result added early metadata in result holder for sequence ID : 0 CamX : [CORE ] camxpipeline.cpp:1261 StreamOn() [OP_EXT][Preview_0_cam_0] StreamingOn for pipeline: 0xb4000079932a2000 with ExposureTimeMs:3200 ExposureTimeStreamOn:3200 hasFlushOccurred: 0 camId=0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_Sensor0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_Stats0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_AWB0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_AutoFocus0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_IFE0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_IPE0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_IPE19_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_FDHw0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_EVA0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_FDManager0_cam0 CamX : [CORE ] camxpipeline.cpp:1270 StreamOn() WaitExplorerStreamOn for node Preview_StatsParse0_cam0 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() Preview_0_cam_0 status is now PipelineStatus::STREAM_ON CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 216, settings 0xb40000794d71a800, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb400007993183bc0, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000078e39a6028 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 216 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 216 enableZSL 0 CHIUSECASE: [REQMAP ] chxadvancedcamerausecase.cpp:3913 ExecuteCaptureRequest() frame: 216 <==> (chiFrameNum) chiOverrideFrameNum: 1 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 217, settings 0xb40000790ad8c800, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb4000079da2f67a0, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000078e39a6028 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 217 contains 1 output buffers CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 1 <==> requestId: 2 <==> sequenceId: 1 <==> CSLSyncId: 216 -- Preview_0_cam_0 isMaster 0 CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 217 enableZSL 0 CHIUSECASE: [REQMAP ] chxadvancedcamerausecase.cpp:3913 ExecuteCaptureRequest() frame: 217 <==> (chiFrameNum) chiOverrideFrameNum: 2 CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 2 <==> requestId: 3 <==> sequenceId: 2 <==> CSLSyncId: 217 -- Preview_0_cam_0 isMaster 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:359 ProcessCaptureResult() Returning framework result metadata only for frame: 216, Metadata: 0xb4000079a7ad08c0 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 216, partial_result 1, result 0xb4000079a7ad08c0, num_physcam_metadata 0, num_output_buffers 0 CamX : [ INFO][HAL ] camxsession.cpp:6825 InjectResult() Session 0xb40000799320d000 [Preview] Inject result added early metadata in result holder for sequence ID : 1 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 218, settings 0xb4000079d7645800, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb400007a09194060, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000078e39a6028 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 218 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 218 enableZSL 0 CamX : [ INFO][HAL ] camxsession.cpp:6825 InjectResult() Session 0xb40000799320d000 [Preview] Inject result added early metadata in result holder for sequence ID : 2 CamX : [ INFO][HAL ] camxhaldevice.cpp:359 ProcessCaptureResult() Returning framework result metadata only for frame: 217, Metadata: 0xb4000079a7ad08c0 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 217, partial_result 1, result 0xb4000079a7ad08c0, num_physcam_metadata 0, num_output_buffers 0 CHIUSECASE: [REQMAP ] chxadvancedcamerausecase.cpp:3913 ExecuteCaptureRequest() frame: 218 <==> (chiFrameNum) chiOverrideFrameNum: 3 CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 3 <==> requestId: 4 <==> sequenceId: 3 <==> CSLSyncId: 218 -- Preview_0_cam_0 isMaster 0 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 219, settings 0xb40000794d71a800, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb400007993183bc0, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000078e39a6028 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 219 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 219 enableZSL 0 CHIUSECASE: [REQMAP ] chxadvancedcamerausecase.cpp:3913 ExecuteCaptureRequest() frame: 219 <==> (chiFrameNum) chiOverrideFrameNum: 4 CamX : [REQMAP][CORE ] camxsession.cpp:5517 ProcessRequest() chiFrameNum: 4 <==> requestId: 5 <==> sequenceId: 4 <==> CSLSyncId: 219 -- Preview_0_cam_0 isMaster 0 CamX : [HAL ] camxhal3.cpp:1784 process_capture_request() frame_number 220, settings 0xb40000794d71a800, logicalCameraId: 0, cameraId: 0 num_output_buffers 1, num_input_buffers 0 CamX : [CONFIG][HAL ] camxhal3.cpp:1810 process_capture_request() output_buffers[0] : 0xb400007993183bc0, buffer: 0x7a9fb65b40, status: 00000000, stream: 0xb4000078e39a6028 CamX : [ INFO][HAL ] camxhaldevice.cpp:2355 ProcessCaptureRequest() CHIModule: Original framework framenumber 220 contains 1 output buffers CHIUSECASE: [DEBUG ] pluginbase.cpp:669 ExecuteProcessRequest() [OP_EXT] frameIndex 220 enableZSL 0 CHIUSECASE: [REQMAP ] chxadvancedcamerausecase.cpp:3913 ExecuteCaptureRequest() frame: 220 <==> (chiFrameNum) chiOverrideFrameNum: 5 CamX : [ INFO][HAL ] camxpipeline.cpp:4512 SendShutterNotification() requestID 1, HDRFeatureModeInfo 0 m_lastSubmittedShutterRequestId: 0 CamX : [CONFIG][HAL ] camxhaldevice.cpp:839 Notify() type 00000002, frame_number 215, timestamp 127576866263701 CamX : [ INFO][HAL ] camxpipeline.cpp:4659 SendShutterNotification() Shutter for sequence 0 requestID: 1 CamX : [ INFO][HAL ] camxhaldevice.cpp:359 ProcessCaptureResult() Returning framework result metadata only for frame: 218, Metadata: 0xb4000079a7ad08c0 CamX : [ INFO][HAL ] camxsession.cpp:6825 InjectResult() Session 0xb40000799320d000 [Preview] Inject result added early metadata in result holder for sequence ID : 3 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 218, partial_result 1, result 0xb4000079a7ad08c0, num_physcam_metadata 0, num_output_buffers 0 CamX : [ INFO][HAL ] camxsession.cpp:5029 ProcessResultMetadata() Finalized metadata result for session Preview Sequence ID 0 mapped to framework id 0 pipeline 0 reqId 1 CamX : [ INFO][HAL ] camxhaldevice.cpp:359 ProcessCaptureResult() Returning framework result metadata only for frame: 215, Metadata: 0xb4000079a7ad08c0 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 215, partial_result 2, result 0xb4000079a7ad08c0, num_physcam_metadata 0, num_output_buffers 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:342 ProcessCaptureResult() Returning framework result Frame: 215, Metadata: 0x0, Stream 0xb4000078e39a6028, Fmt: 35 Width: 1440 Height: 1080 Fence: -1 Status: 0 CamX : [CONFIG][HAL ] camxhal3.cpp:2075 process_capture_result() frame_number 215, partial_result 0, result 0x0, num_physcam_metadata 0, num_output_buffers 1 CamX : [CONFIG][HAL ] camxhal3.cpp:2106 process_capture_result() output_buffers[0] : 0xb400007908dba660, buffer: 0xb4000079daaeef98, status: 00000000, stream: 0xb4000078e39a6028 CamX : [CORE ] camxsession.cpp:1266 Flush() Flush took 20 ms. Session (0xb4000079db00d000) Preview CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079db00d000 Preview CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079db00d000 CamX : [CORE ] camxpipeline.h:2371 SaveFlushInfo() Pipeline:Preview Saving lastFlushRequestId: 43 flushType: 0 CamX : [CORE ] camxsession.cpp:1266 Flush() Flush took 1 ms. Session (0xb4000079db00d000) Preview CamX : [HAL ] camxhal3.cpp:1950 flush() HalOp: End FLUSH: 0xb4000079d6bf1010 with result 0, logicalCameraId: 0, cameraId: 0 CamX : [HAL ] camxhal3.cpp:1938 flush() HalOp: Begin FLUSH: 0xb4000079d6bf1010, logicalCameraId: 0, cameraId: 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:3361 LogFrameworkRequests() m_frameworkRequests is empty latestFrameworkRequestIndex: -1 CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079db00d000 Preview CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079db00d000 CamX : [CORE ] camxpipeline.h:2371 SaveFlushInfo() Pipeline:Preview Saving lastFlushRequestId: 43 flushType: 0 CamX : [CORE ] camxsession.cpp:1266 Flush() Flush took 0 ms. Session (0xb4000079db00d000) Preview CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079db00d000 Preview CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079db00d000 CamX : [CORE ] camxpipeline.h:2371 SaveFlushInfo() Pipeline:Preview Saving lastFlushRequestId: 43 flushType: 0 CamX : [CORE ] camxsession.cpp:1266 Flush() Flush took 0 ms. Session (0xb4000079db00d000) Preview CamX : [HAL ] camxhal3.cpp:1950 flush() HalOp: End FLUSH: 0xb4000079d6bf1010 with result 0, logicalCameraId: 0, cameraId: 0 CamX : [ INFO][HAL ] camxhal3.cpp:1136 close() close(): 0xb4000079d6bf1010 CamX : [HAL ] camxhal3.cpp:1158 close() HalOp: Begin CLOSE, logicalCameraId: 0, cameraId: 0 CamX : CHIUSECASE: [DEBUG ] cameraextcmd.cpp:698 readSmapsRollup() Pss=339098 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:707 readSmapsRollup() Pss+swap=436994 CHIUSECASE: [DEBUG ] cameraextcmd.cpp:726 getPss() smapsPss=436994 total=436994kb CamX : [ INFO][HAL ] camxhal3.cpp:1169 close() Close: overrideCameraClose is 15 , overrideCameraOpen is 0 CamX : [ INFO][HAL ] camxhaldevice.cpp:3361 LogFrameworkRequests() m_frameworkRequests is empty latestFrameworkRequestIndex: -1 CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079db00d000 Preview CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079db00d000 CamX : [CORE ] camxsession.cpp:1283 Pause() Pause:0 session 0xb4000079db00d000 Preview CamX : [CORE ] camxdeferredrequestqueue.cpp:91 Pause() DRQ is resuming, session 0xb4000079db00d000 CamX : [CORE ] camxpipeline.h:2371 SaveFlushInfo() Pipeline:Preview Saving lastFlushRequestId: 43 flushType: 0 CamX : [CORE ] camxsession.cpp:1266 Flush() Flush took 0 ms. Session (0xb4000079db00d000) Preview CamX : [CORE ] camxpipeline.cpp:1480 StreamOff() [OP_EXT]Preview_0_cam_0 Streaming Off successful:0xb4000079d5274000, last request id 43 is real time 1 cam Id: 0 mode : 1 hasFlushOccurred: 0 CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() Preview_0_cam_0 status is now PipelineStatus::STREAM_OFF CamX : [CORE ] camxpipeline.h:3497 SetPipelineStatus() Preview_0_cam_0 status is now PipelineStatus::RESOURCES_RELEASED CamX : CamX : [CORE ] camxsession.cpp:1707 Destroy() Session (0xb4000079db00d000) Destroy Preview CamX : [CORE ] camxpipeline.cpp:270 Destroy() Destroying Preview_0 CamX : [ INFO][HAL ] camxchicontext.cpp:4372 ReleaseGlobalUsecaseMetadataPool() Invalidate Global usecase pool for id 0 CamX : [CONFIG][CORE ] camxpipeline.cpp:3467 DestroyNodes() Trigger restart clients to resource manager CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:5397 TeardownOverrideSession() clear m_logicalCameraInfo[0].m_pCamera3Device=0xb4000079d6bf1010 CHIUSECASE: [CORE_CFG ] chxextensionmodule.cpp:6277 RequestThreadProcessing() Terminating recovery thread for logical cameraId: 0 CHIUSECASE: [DEBUG ] extensionlayer.cpp:860 TeardownOverrideSession() [OP_EXT] DESTROY_SESSION X CHIUSECASE: [DEBUG ] chxextensionmodule.cpp:1473 RemapCameraId() logicalCameraId -1, physicalCameraId -1, cameraId 0, pPrimaryCameraIndex 0 CamX : [ INFO][HAL ] camxhal3module.cpp:545 SetTorchModeInternal() Torch notify state is (inReleaseMode = 1, dropCallbacks = 0) CamX : [ INFO][HAL ] camxhal3module.cpp:545 SetTorchModeInternal() Torch notify state is (inReleaseMode = 1, dropCallbacks = 0) CamX : [ INFO][HAL ] camxhal3module.cpp:545 SetTorchModeInternal() Torch notify state is (inReleaseMode = 1, dropCallbacks = 0) CamX : [ INFO][HAL ] camxhal3module.cpp:545 SetTorchModeInternal() Torch notify state is (inReleaseMode = 1, dropCallbacks = 0) CamX : [HAL ] camxhaldevice.cpp:2306 CloseCachedSensorHandles() Releasing resources for Logical CameraID=0, PhysicalID=0 CamX : [HAL ] camxhal3.cpp:1186 close() HalOp: End CLOSE, logicalCameraId: 0, cameraId: 0 CamX : [HAL ] camxthermalmanager.cpp:214 UnregisterHALDevice() Unregistered pHALDevice=0xb4000079d6bf1000 CameraId=0
【關注我，后續持續新增專題博文，謝謝！！！】
下一篇講解：
![[2-02-02].第03節：環境搭建 - Win10搭建ES集群環境](http://pic.xiahunao.cn/[2-02-02].第03節：環境搭建 - Win10搭建ES集群環境)
