nagios監控vsphere ESXi主機硬件狀態(CPU風扇、電源模塊、硬盤、溫度)

esxi 的只讀賬戶和密碼(本文以chkhardware/chkreadonly為例)

插架下載地址,此地址附有相關說明:http://www.claudiokuenzler.com/nagios-plugins/check_esxi_hardware.php

ESXI主機:DELL R410

ESXI版本:ESXI4.0

配置

1)check_esxi_hardware.py 復制到nagios插件目錄/usr/local/nagios/libexec

2)command.cfg

要實現如下的效果:-U 用戶名 -P 密碼

check_esxi_hardware.py -H 192.168.0.130 -U chkhardware -P chkreadonly -V dell

下面這是根據模板,按照實際環境添加的內容:commands.cfg

# 'check_esxi_hardware' command definition?? chkhardware/chkreadonly

define command{

command_name check_esxi_hardware

command_line $USER1$/check_esxi_hardware.py -H $HOSTADDRESS$ -U $ARG1$ -P $ARG2$ -t $ARG3$ -V $ARG4$

}

增加監控主機,在主機配置文件中

# chkhardware/chkreadonly

define service{

use????????????????????????????? remote-service

host_name??????????????????????? vsphere.0.xxx

service_description????????????? check_esxi_hardware

check_command??????????????????? check_esxi_hardware!chkhardware!chkreadonly!500!dell

}

新建一只讀帳號,進行測試

# /root/check_esxi_hardware.py -H 192.168.0.130 -U chkhardware -P chkreadonly -V dell

OK - Server: Dell Inc. PowerEdge R410 s/n: 2FPTV2X System BIOS: 1.3.9 2010-04-07

這個腳本用到了PyWEEM模塊，如果機器上沒有，需要安裝的：

# wget http://downloads.sourceforge.net/project/pywbem/pywbem/pywbem-0.7/pywbem-0.7.0.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fpywbem%2Ffiles%2Fpywbem%2F&ts=1299742557&use_mirror=voxel

# tar -xvzf pywbem-0.7.0.tar.gz

# cd pywbem-0.7.0

# python setup.py build

# python setup.py install

####

參考文檔：