顯示器選三星還是飛利浦

Maybe you want to turn off your Philips Hue lights after a certain amount of time has passed, or have them blink as a reminder. Whatever your needs, here’s how to set a timer for your Philips Hue lights to have them automatically turn on or off after a specified amount of time.

也許您想在經過一定時間后關閉Philips Hue燈，或者讓它們閃爍以提醒您。 無論您有什么需要，這里都為您的飛利浦Hue燈設置了一個計時器，以使其在指定的時間后自動打開或關閉。

為什么要設置計時器？ (Why Set a Timer?)

There are many reasons why you might want to set a timer for your lights. Maybe you’re cooking with a sleeping baby in the house and you don’t want your traditional timer to ring loudly when it hits zero. In that case, you can set your kitchen lights to blink, or even change them to a different color to let you know that your brownies are done.

您可能要為燈光設置計時器有很多原因。 也許您正在與一個正在睡覺的嬰兒一起做飯，并且您不希望傳統計時器在零時大聲響起。 在這種情況下，您可以將廚房燈設置為閃爍，甚至將它們更改為其他顏色，以使您知道巧克力布朗尼已經完成。

You can also set a timer if you want to be more strict with your free time, either for yourself or for your kids. Say you want to only give your kids 15 minutes to read comic books. You can have the lights in that room blink after 15 minutes (or shut off entirely if you want to be cruel). Or, maybe you know you’re going to fall asleep reading, so you want your lights to automatically turn off in a half hour or so.

如果您想更嚴格地限制自己或孩子的空閑時間，也可以設置一個計時器。 假設您只想給您的孩子15分鐘的時間閱讀漫畫書。 您可以讓該房間中的燈在15分鐘后閃爍(或者，如果您想殘酷地將其完全關閉)。 或者，也許您知道您即將入睡，所以您希望燈在半小時左右自動關閉。

Essentially, you can use your Philips Hue lights as sort of a silent alternative to loud timers and provide you with a visual alert rather than an audible one. If this sounds like something you’re interested in, here’s how to set it up.

本質上，您可以將Philips Hue燈用作響亮的計時器的靜音替代品，并為您提供視覺警報而不是聽覺警報。 如果這聽起來像您感興趣的事情，請按照以下步驟進行設置。

如何為飛利浦色相燈設置計時器 (How to Set a Timer for Your Philips Hue Lights)

Start off by opening up the Hue app on your smartphone and tapping the “Routines” tab down at the bottom of the screen.

首先，打開智能手機上的Hue應用程序，然后點擊屏幕底部的“常規”標簽。

On the “Routines” page, select the “Timers” option.

在“常規”頁面上，選擇“計時器”選項。

On the “Timers” page, tap the round “+” button in the bottom-right corner.

在“計時器”頁面上，點擊右下角的圓形“ +”按鈕。

Give your timer a name at the top.

在頂部給您的計時器起一個名字。

Below that, select how long the timer will last. In other words, select the amount of time that you want to elapse before your lights do something.

在此之下，選擇計時器將持續多長時間。 換句話說，選擇您要在燈做某事之前經過的時間。

Next, tap the “Where” option.

接下來，點擊“位置”選項。

On the “Where” page, select the room that you want to control. Unfortunately, you can’t select individual bulbs. When you’ve made your selection, tap the back arrow in the top-left corner.

在“位置”頁面上，選擇要控制的房間。 不幸的是，您不能選擇單個燈泡。 做出選擇后，請點擊左上角的后退箭頭。

A new section named after the room you selected appears below the “Where” option. Tap that to configure what you want to happen with the lights.

以您所選房間命名的新部分出現在“位置”選項下方。 點擊該按鈕可配置您想要在燈光下發生的事情。

You can either have the lights blink, turn them on or off, or select other scenes that you’ve created yourself.

您可以讓燈光閃爍，打開或關閉它們，或者選擇自己創建的其他場景。

After selecting the action, tap “Save” in the top-right corner.

選擇動作后，點擊右上角的“保存”。

Your new timer appears in the list and starts automatically. The “Timers” screen shows how much time is left before the action is performed. Tap “Stop” to cancel the timer if you want to.

您的新計時器將顯示在列表中并自動啟動。 “計時器”屏幕顯示執行操作之前還剩下多少時間。 如果需要，點擊“停止”以取消計時器。

If you do hit “Stop”, the timer resets completely. Unfortunately, there’s no way to pause a timer. To delete a timer, just?swipe left on it and tap the “Delete” button that appears.

如果您確實點擊了“停止”，則計時器將完全重置。 不幸的是，無法暫停計時器。 要刪除計時器，只需在其上向左滑動，然后點按出現的“刪除”按鈕即可。

翻譯自: https://www.howtogeek.com/247749/how-to-set-a-timer-for-your-philips-hue-lights/

顯示器選三星還是飛利浦