flutter image boxfit

直接從官網文檔中復制記錄，方便以后查看

contain → const BoxFit

As large as possible while still containing the source entirely within the target box.

const BoxFit(1)

cover → const BoxFit

As small as possible while still covering the entire target box.

const BoxFit(2)

fill → const BoxFit

Fill the target box by distorting the source's aspect ratio.

const BoxFit(0)

fitHeight → const BoxFit

Make sure the full height of the source is shown, regardless of whether this means the source overflows the target box horizontally.

const BoxFit(4)

fitWidth → const BoxFit

Make sure the full width of the source is shown, regardless of whether this means the source overflows the target box vertically.

const BoxFit(3)

none → const BoxFit

Align the source within the target box (by default, centering) and discard any portions of the source that lie outside the box.

The source image is not resized.

const BoxFit(5)

scaleDown → const BoxFit

Align the source within the target box (by default, centering) and, if necessary, scale the source down to ensure that the source fits within the box.

This is the same as contain if that would shrink the image, otherwise it is the same as none.

const BoxFit(6)

本文來自互聯網用戶投稿，該文觀點僅代表作者本人，不代表本站立場。本站僅提供信息存儲空間服務，不擁有所有權，不承擔相關法律責任。
如若轉載，請注明出處：http://www.pswp.cn/news/254645.shtml
繁體地址，請注明出處：http://hk.pswp.cn/news/254645.shtml
英文地址，請注明出處：http://en.pswp.cn/news/254645.shtml

如若內容造成侵權/違法違規/事實不符，請聯系多彩編程網進行投訴反饋email:809451989@qq.com，一經查實，立即刪除！