IJCAI 2024 International Joint Conference on Artificial Intelligence

在這里插入圖片描述

目錄

  • 1、 重要
      • 1.1 官網:
      • 1.2 提交網址:
      • 1.3 模板 (latex & word)
  • 2、 Call for Papers
    • 2.1 Important Dates
    • 2.2 Details
  • 3、 注意事項
  • 4 New in 2024
  • 5 Simplified procedure for resubmission information
  • 6、 Submission Process 提交流程
    • 6.1 Formatting guidelines:
    • 6.2 Submission site:
    • 6.3 Mandatory abstract submission
    • 6.4 Author Information
  • 7、 Supplementary material
  • 8、 Preprints (arXiv)
  • 9、 Conference Committee
  • 10、 Program Committee

1、 重要

1.1 官網:

https://ijcai24.org/ 鏈接

1.2 提交網址:

https://cmt3.research.microsoft.com/IJCAI2024 鏈接

1.3 模板 (latex & word)

https://www.ijcai.org/authors_kit 鏈接



2、 Call for Papers

2.1 Important Dates

(all times are Anywhere On Earth, UTC-12)

  • Abstract submission deadline: **January 10, 2024 **
  • Author information deadline: January 16, 2024
  • Full paper submission deadline: January 17, 2024
  • Appendix and resubmission information deadline: January 24, 2024
  • Summary reject notification: February 22, 2024
  • Author response period: March 18-21, 2024
  • Paper notification: April 16, 2024
  • Conference: Saturday, August 3rd to Friday, August 9th, 2024.

重要日期(所有時間均為地球任何地方時間,UTC-12)

  • 摘要提交 截止日期**2024年1月10日 **
  • 作者信息提交截止日期:2024年1月16日
  • 全文提交截止日期2024年1月17日
  • 附錄和重新提交信息截止日期:2024年1月24日
  • 摘要拒絕通知:2024年2月22日
  • 作者回復期2024年3月18日至21日
  • 論文通知2024年4月16日
  • 會議時間:2024年8月3日(星期六)至8月9日(星期五)

2.2 Details

Submissions are invited for the 33rd International Joint Conference on Artificial Intelligence, which is planned to be held in Jeju Island, South Korea, from August 3rd to August 9th, 2024. Since 1969, IJCAI has remained the premier conference bringing together the international AI community to communicate the advances and achievements of artificial intelligence research.

In addition to the main track, the authors will be able to submit papers to the three special tracks (AI for Good , AI the Arts and Creativity, and Human-Centred AI), as well as the survey track; these tracks will post their calls for papers later this year, and their deadlines, procedures and policies may differ from what is described below.

Submissions to IJCAI 2024 should report significant, original, and previously unpublished results on any aspect of artificial intelligence. Papers on novel AI research problems, AI techniques for novel application domains, and papers that cross discipline boundaries within AI are especially encouraged.

A selection of the best papers submitted to IJCAI 2024 will be invited for a fast track in the Artificial Intelligence Journal and/or the Journal of AI Research.

誠邀提交文章參加第33屆國際人工智能聯合會議(International Joint Conference on Artificial Intelligence,IJCAI),該會議計劃于2024年8月3日至8月9日在韓國濟州島舉行。自1969年以來,IJCAI一直是首屈一指的會議,匯聚國際人工智能社區,交流人工智能研究的進展和成就。

除了主要論壇之外,作者們還可以向三個特別論壇(AI for Good,AI the Arts and Creativity,以及 Human-Centred AI)和調研論壇提交論文;這些論壇將于今年晚些時候發布論文征集通知,其截止日期、程序和政策可能與以下描述的不同。

提交給IJCAI 2024的文章應報道人工智能任何方面的重要、原創和未曾發表的成果。特別鼓勵提交關于新穎人工智能研究問題、新應用領域的人工智能技術以及跨越人工智能學科邊界的論文。



3、 注意事項

  • Papers must be no longer than 9 pages in total: 7 pages for the body of the paper and 2 pages for references.

  • All authors must provide author information. All authors are expected to be available to review.

  • Two-phase reviewing:

    • Every paper will receive two reviews in Phase 1.
    • Papers not rejected in Phase 1 will receive additional reviews in Phase 2 and will be able to provide an author’s response.
  • Supplementary material (e.g. appendices, data, source code, resubmission information) is due one week after the paper deadline.

  • Paper resubmissions from other conferences are welcome but authors are required to provide resubmission information, as described below.


  • 論文總頁數不得超過**9頁論文正文部分為7頁**,參考文獻部分為2頁

  • 所有作者必須提供作者信息。期望所有作者都能進行審閱。

  • 兩階段審閱

    • 每篇論文在第一階段將收到兩份審閱
    • 在第一階段未被拒絕的論文將在第二階段接受額外審閱,并有機會提供作者回復。
  • 補充資料(例如附錄、數據、源代碼、重新提交信息)需在**論文截止日期后一周**提交。

  • 歡迎從其他會議重新提交論文,但作者需要提供重新提交的相關信息,如下所述。



4 New in 2024

Generative AI models, including Chat-GPT, BARD, LLaMA, or similar LLMs, do not satisfy the criteria for authorship of papers published in IJCAI 2024. If authors use an LLM in any part of the paper-writing process they assume full responsibility for all content, including checking for plagiarism and correctness of all text.

We encourage papers that describe research on or involving LLMs. Text generated by an LLM as part of the paper’s methodology or experimental analysis is allowed but needs to be properly documented and described in the paper.

生成式人工智能模型,包括Chat-GPT、BARD、LLaMA或類似的語言生成模型,不符合IJCAI 2024發表論文的作者資格標準。如果作者在論文撰寫過程中使用了語言生成模型,包括但不限于LLM,他們需對所有內容負全部責任,包括檢查抄襲和文本正確性

我們鼓勵提交描述與語言生成模型相關的研究的論文。作為論文方法論或實驗分析的一部分所生成的文本是允許的,但需要在論文中進行適當的記錄和描述。


5 Simplified procedure for resubmission information

Authors must declare whether their paper has been rejected from another peer-reviewed conference in the last 12 months before the submission. They will be requested to upload the latest rejected version (anonymized if necessary) with the reviewer’s comments; a cover letter responding to the reviews is optional. To avoid bias, the resubmission information will only be made available to reviewers after they submit their reviews. The program committee reserves the right to reject papers that fail to report resubmission information. Further, reviewers will be encouraged to check whether the resubmission addresses factual issues pointed out in the reviews of the previous version (e.g., typos, incorrect attribution of results, etc.) and to reject submissions that fail to do so.

重新提交信息的簡化流程:
作者必須聲明他們的論文在提交之前的最近12個月內是否被另一個同行評審的會議拒絕過。他們將被要求上傳最新被拒絕的版本(必要時匿名化)以及審稿人的評論;回復審稿意見的附信是可選的。為避免偏見,重新提交信息只會在審稿人提交審稿意見后提供給他們。程序委員會保留拒絕未報告重新提交信息的論文的權利。此外,審稿人將被鼓勵檢查重新提交的論文是否解決了前一個版本審稿中指出的事實問題(例如,拼寫錯誤、結果錯誤歸因等),并拒絕未能解決這些問題的提交。


6、 Submission Process 提交流程

6.1 Formatting guidelines:

The updated LaTeX styles and Word template will be available at

  • https://www.ijcai.org/authors_kit 1
    in December 2023


6.2 Submission site:

https://cmt3.research.microsoft.com/IJCAI2024 2


6.3 Mandatory abstract submission

The paper title, author names, contact details, and a brief abstract must be submitted electronically through the IJCAI 2024 paper submission site (link above) by the abstract submission deadline. It will be possible to make minor edits to the title and abstract until the full paper submission deadline. However, submissions with “placeholder” abstracts may be removed without consideration.

論文標題、作者姓名、聯系方式以及簡要摘要必須在摘要提交截止日期前通過IJCAI 2024論文提交網站(上方鏈接)進行電子提交。可以在全文提交截止日期之前對標題和摘要進行輕微編輯。然而,帶有“占位符”摘要的提交可能會被刪除而不予考慮。


6.4 Author Information

Full papers must be submitted through the same site by the paper submission deadline. The list of author names provided at the Author Information Deadline is final. Authors may not be added to or removed from papers following submission. (The author’s ordering may still be changed during the camera-ready period.) All authors must fill out the author information form in the submission site by the Author Information deadline. The author’s information is important to control the COIs in the review process. A submission may be rejected without review if any co-author does not register and enter the necessary information.

全文必須在論文提交截止日期前通過同一網站提交。在作者信息截止日期提供的作者名單是最終的,提交后不得添加或刪除作者作者順序在最終版本階段仍可更改)。
所有作者必須在作者信息截止日期之前在提交網站上填寫作者信息表
作者的信息對于控制評審過程中的利益沖突非常重要。如果任何共同作者未注冊或輸入必要信息,則可能會導致提交被拒絕而不進行審查。


7、 Supplementary material

Authors may submit up to 50MB of supplementary material, such as appendices, proofs, derivations, data, or source code; all supplementary material must be in PDF or ZIP format.
Supplementary material should be created by the authors that directly support the submission content. Like submissions, supplementary material must be anonymized.
There are two entries for supplementary files in the CMT system: one is “TechnicalAppendix”, and the other one is “ResubmissionFile”. The latter should be used for providing resubmission information only. Looking at the technical appendix is at the discretion of the reviewers.

作者可以提交多達50MB的補充資料,例如附錄、證明、推導、數據或源代碼;所有補充資料必須以PDF或ZIP格式呈現。
補充資料應由作者創建,直接支持提交內容。與提交內容一樣,補充資料必須進行匿名化處理。
在CMT系統中有兩個補充文件的條目:一個是“TechnicalAppendix”,另一個是“ResubmissionFile”。后者僅用于提供重新提交信息。審稿人有權決定是否查看技術附錄。



8、 Preprints (arXiv)

The existence of non-anonymous preprints (on arXiv, social media, websites, etc.) and prior publication in non-archival venues will not result in rejection. Note that the submission to CMT must always be anonymized regardless of whether a preprint has been released. Reviewers will be instructed not to look for such preprints actively, but encountering them will not constitute a conflict of interest.

非匿名預印本(在arXiv、社交媒體、網站等發布)的存在和先前在非存檔場所的出版不會導致拒稿
請注意,提交到CMT的論文必須始終進行匿名處理,無論是否發布了預印本。審稿人將被指示不積極尋找此類預印本,但偶然遇到它們并不構成利益沖突。


9、 Conference Committee

在這里插入圖片描述



10、 Program Committee

在這里插入圖片描述



在這里插入圖片描述

本文來自互聯網用戶投稿,該文觀點僅代表作者本人,不代表本站立場。本站僅提供信息存儲空間服務,不擁有所有權,不承擔相關法律責任。
如若轉載,請注明出處:http://www.pswp.cn/news/215773.shtml
繁體地址,請注明出處:http://hk.pswp.cn/news/215773.shtml
英文地址,請注明出處:http://en.pswp.cn/news/215773.shtml

如若內容造成侵權/違法違規/事實不符,請聯系多彩編程網進行投訴反饋email:809451989@qq.com,一經查實,立即刪除!

相關文章

電腦出現錯誤0x80004005怎么解決,解決0x80004005的問題

當電腦出現0x80004005錯誤時,通常是由于系統或應用程序之間的通信問題或文件系統損壞引起的。該錯誤代碼表示未指定錯誤,在Windows系統中較為常見。 一.解決0x80004005錯誤的步驟 重新啟動電腦 有時候,錯誤只是一個暫時的問題,重…

單調棧【基礎算法精講 26】

思想 : 及時去除無用數據,保證棧中數據有序 739.每日溫度 鏈接 : 力扣(LeetCode)官網 - 全球極客摯愛的技術成長平臺 思路 : 單調棧,從后往前遍歷,棧中記錄下一個更大元素的候選項; 代碼 : 從后…

郵箱和手機號驗證碼的發送

一、郵箱驗證碼 1、隨機生成驗證碼工具類 /*** 隨機生成驗證碼工具類*/ public class ValidateCodeUtils {/*** 隨機生成驗證碼* param length 長度為4位或者6位* return*/public static Integer generateValidateCode(int length){Integer code null;if(length 4){code ne…

【操作系統和計網從入門到深入】(二)進程

前言 這個專欄其實是博主在復習操作系統和計算機網絡時候的筆記,所以如果是博主比較熟悉的知識點,博主可能就直接跳過了,但是所有重要的知識點,在這個專欄里面都會提到!而且我也一定會保證這個專欄知識點的完整性&…

高通平臺開發系列講解(USB篇)MBIM協議詳解

文章目錄 一、MBIM協議二、MBIM 消息類型三、基本控制消息構成3.1、MBIM OPEN MSG FORMAT3.2、MBIM CLOSE MSG FORMAT3.3、MBIM_COMMAND_MSG3.4、MBIM_COMMAND_DONE3.5、MBIM_INDICATE_STATUS_MSG四、MBIM Message(UUID+CID)4.1、UUID_BASIC_CONNECT

頻率、概率

頻率 在相同的條件下進行試驗,假設試驗進行了次,其中隨機事件A發生了次,那么就稱為隨機事件A發生的頻率。 概率 假設隨機試驗E的樣本空間是S,對于其中每個隨機事件,都對應了一個實數,把這個實數稱為隨機…

網絡游戲APP備案|游戲

網絡游戲APP備案|游戲 網絡游戲備案分析需要備案原因(個人看法)對小公司對大公司 總結 網絡游戲備案分析 相信做網絡游戲的伙伴們在23年都收到了各個平臺的公告,網絡游戲需要進行APP的備案。也就是說網路游戲現在安卓平臺也不是你想上架測試…

中國降冰片烯行業研究與投資預測報告(2024版)

內容簡介: 降冰片烯(Norbornene,NB)也稱降莰烯(Norcamphene),是一種橋環烴。降冰片烯是一種常溫白色透光的結晶。降冰片烯易升華,沸點96℃,熔點44-46℃,閃點…

酶聯免疫抗體試劑——博邁倫生物

酶聯免疫抗體試劑是一種廣泛應用于生物醫學研究領域的實驗工具,其在檢測、分析和診斷等方面發揮著重要作用。本文將從酶聯免疫抗體試劑的基本原理、應用領域、優勢特點以及未來發展趨勢等方面進行詳細闡述。 基本原理 酶聯免疫抗體試劑是一種利用酶標記的抗體與特…

a1隨筆小思--家書

師夷長技以自強 不應該只學西方的技術,更應該傳承我們中華的五千年的先人智慧。 修心養性 藏器于身 子曰:“可與言而不與之言,失人;不可與言而與之言,失言。知者不失人,亦不失言。” 孔子說:“可以跟他交談&#xf…

051:vue項目webpack打包后查看各個文件大小

第050個 查看專欄目錄: VUE ------ element UI 專欄目標 在vue和element UI聯合技術棧的操控下,本專欄提供行之有效的源代碼示例和信息點介紹,做到靈活運用。 (1)提供vue2的一些基本操作:安裝、引用,模板使…

什么是sql的謂詞下推

SQL的謂詞下推(Predicate Pushdown)是一種數據庫查詢優化技術,它將查詢中的過濾條件(謂詞)盡可能地“下推”到查詢計劃中更早的階段執行。這意味著,系統嘗試在處理和轉換數據之前先應用這些過濾條件&#x…

Oracle merge into using on when then 用法

merge into using on when then 是 Oracle 數據庫合并數據表的一種操作, MERGE INTO target_table a USING source_table b ON (a.col1 b.col1 and a.col2 b.col2) WHEN MATHED THEN update set a.col3 b.col3 WHEN NOT MATHED THEN insert (a.col1,a.c…

Linux壓縮和解壓命令

Linux系統中壓縮包的后綴有.zip、.gz、.bz2、.xz等,后綴不同表示壓縮方式不同。 1.打包命令 tar tar命令用于備份文件的命令,該命令可打包多個文件或目錄,也可將被打包的文件與目錄從包中還原。 tar 選項 包名 {參數} 包名是指打包的文…

git 分支合并

git 分支合并 比如 20231205 分支合并,到main分支上 1,切換到 main分支上 git checkout main2,進行合并 git merge 202312053,如果您希望在合并時保持提交歷史的清晰,您可以使用 rebase 命令: git reba…

javafx-在listview中添加了點擊事件后會執行多次

現象 我在一個按鈕的點擊事件中添加了,點擊事件的監聽如下,就會造成我多次點擊按鈕后,里面打開瀏覽器會執行多次 listviewitemListener new ChangeListener() {Overridepublic void changed(ObservableValue observable, Object oldValue, …

Python基礎期末復習 新手

類是創建實例的模板,而實例則是一個一個具體的對象,各個實例擁有的數據都互相獨立,互不影響。 實例方法是一個普通的函數,類方法和靜態方法都是通過函數裝飾器的方式實現的;實例方法需要傳入self,類方法需…

git強制回滾,遠程強制更新,git pull強制更新

注意:這里是強制回滾,回滾后,之后歷史的就沒有了,慎用。 本地強制回滾 強制回滾到上一個版本 git reset --hard HEAD^強制回滾上上個版本 git reset --hard HEAD^^git log查看版本 git log --prettyonelinegit log --prettyf…

高通平臺開發系列講解(USB篇)MBIM驅動詳解

文章目錄 一、數據結構二、源碼分析三、adroid_mbim創建四、讀寫 /dev/adroid_mbim4.1、讀gsi_ctrl_dev_read4.2、寫gsi_ctrl_dev_write沉淀、分享、成長,讓自己和他人都能有所收獲!?? ??本文主要介紹高通平臺USB網卡MBIM驅動。 一、數據結構 目錄:drivers/usb/gadget/…

【cocotb】【達坦科技DatenLord】Cocotb Workshop分享

https://www.bilibili.com/video/BV19e4y1k7EE/?spm_id_from333.337.search-card.all.click&vd_sourcefd0f4be6d0a5aaa0a79d89604df3154a 方便RFM實現 cocotb_test 替代makefile , 類似python 函數執行