CentOS7執行yum命令報錯
- 引
- 更新yum源
- 備份原有源
- 創建新的源文件
- 清理并重建緩存
引
CentOS 7 系統無法連接到 CentOS 的官方鏡像站點。這通常是由于網絡問題或 CentOS 7 已停止維護導致的(2024年6月30日后 CentOS 7 已進入 EOL)
報錯明細:
已加載插件:fastestmirror
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - “Could not resolve host: mirrorlist.centos.org; 未知的錯誤”
One of the configured repositories failed (未知),
and yum doesn’t have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work “fix” this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo= …
4. Disable the repository permanently, so yum won’t use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable
or
subscription-manager repos --disable=
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/7/x86_64
更新yum源
備份原有源
mkdir -p /etc/yum.repos.d/backup
mv /etc/yum.repos.d/CentOS-* /etc/yum.repos.d/backup/
創建新的源文件
cat > /etc/yum.repos.d/CentOS-Base.repo <<'EOF'
[base]
name=CentOS-7 - Base
baseurl=https://vault.centos.org/7.9.2009/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1[updates]
name=CentOS-7 - Updates
baseurl=https://vault.centos.org/7.9.2009/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1[extras]
name=CentOS-7 - Extras
baseurl=https://vault.centos.org/7.9.2009/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
EOF
清理并重建緩存
yum clean all
yum makecache