配置文件

　　　兩個核心文件：ansible.cfg和hosts文件,默認都存放在/etc/ansible目錄下。

　　　ansible.cfg：主要設置一些ansible初始化的信息，比如日志存放路徑、模塊、插件等配置信息

　　　hosts：機器清單，進行分組管理

?

　1.ansible.cfg

# config file for ansible -- http://ansible.com/
# ==============================================# nearly all parameters can be overridden in ansible-playbook 
# or with command line flags. ansible will read ANSIBLE_CONFIG,
# ansible.cfg in the current working directory, .ansible.cfg in
# the home directory or /etc/ansible/ansible.cfg, whichever it
# finds first[defaults]   --->通用默認配置# some basic default values...inventory      = /etc/ansible/hosts     這個是默認庫文件位置,腳本,或者存放可通信主機的目錄
#library        = /usr/share/my_modules/   Ansible默認搜尋模塊的位置
remote_tmp     = $HOME/.ansible/tmp   Ansible 通過遠程傳輸模塊到遠程主機,然后遠程執行,執行后在清理現場.在有些場景下,你也許想使用默認路徑希望像更換補丁一樣使用
pattern        = *    如果沒有提供“hosts”節點,這是playbook要通信的默認主機組.默認值是對所有主機通信
forks          = 5    在與主機通信時的默認并行進程數 ，默認是5d
poll_interval  = 15    當具體的poll interval 沒有定義時,多少時間回查一下這些任務的狀態, 默認值是5秒
sudo_user      = root   sudo使用的默認用戶 ，默認是root
#ask_sudo_pass = True   用來控制Ansible playbook 在執行sudo之前是否詢問sudo密碼.默認為no
#ask_pass      = True    控制Ansible playbook 是否會自動默認彈出密碼
transport      = smart   通信機制.默認 值為’smart’。如果本地系統支持 ControlPersist技術的話,將會使用(基于OpenSSH)‘ssh’,如果不支持講使用‘paramiko’.其他傳輸選項包括‘local’, ‘chroot’,’jail’等等
#remote_port    = 22    遠程SSH端口。 默認是22
module_lang    = C   模塊和系統之間通信的計算機語言，默認是C語言# plays will gather facts by default, which contain information about
# the remote system.
#
# smart - gather by default, but don't regather if already gathered
# implicit - gather by default, turn off with gather_facts: False
# explicit - do not gather by default, must say gather_facts: True
gathering = implicit   控制默認facts收集（遠程系統變量）. 默認值為’implicit’, 每一次play,facts都會被收集# additional paths to search for roles in, colon separated
#roles_path    = /etc/ansible/roles   roles 路徑指的是’roles/’下的額外目錄,用于playbook搜索Ansible roles# uncomment this to disable SSH key host checking
#host_key_checking = False    檢查主機密鑰# change this for alternative sudo implementations
sudo_exe = sudo     如果在其他遠程主機上使用另一種方式執sudu操作.可以使用該參數進行更換# what flags to pass to sudo   傳遞sudo之外的參數
#sudo_flags = -H# SSH timeout    SSH超時時間
timeout = 10# default user to use for playbooks if user is not specified
# (/usr/bin/ansible will use current user as default)
#remote_user = root   使用/usr/bin/ansible-playbook鏈接的默認用戶名，如果不指定，會使用當前登錄的用戶名# logging is off by default unless this path is defined
# if so defined, consider logrotate
#log_path = /var/log/ansible.log     日志文件存放路徑# default module name for /usr/bin/ansible
#module_name = command     ansible命令執行默認的模塊# use this shell for commands executed under sudo
# you may need to change this to bin/bash in rare instances
# if sudo is constrained
#executable = /bin/sh     在sudo環境下產生一個shell交互接口. 用戶只在/bin/bash的或者sudo限制的一些場景中需要修改# if inventory variables overlap, does the higher precedence one win
# or are hash values merged together?  The default is 'replace' but
# this can also be set to 'merge'.
#hash_behaviour = replace    特定的優先級覆蓋變量# list any Jinja2 extensions to enable here:
#jinja2_extensions = jinja2.ext.do,jinja2.ext.i18n      允許開啟Jinja2拓展模塊# if set, always use this private key file for authentication, same as 
# if passing --private-key to ansible or ansible-playbook
#private_key_file = /path/to/file         私鑰文件存儲位置# format of string {{ ansible_managed }} available within Jinja2 
# templates indicates to users editing templates files will be replaced.
# replacing {file}, {host} and {uid} and strftime codes with proper values.
ansible_managed = Ansible managed: {file} modified on %Y-%m-%d %H:%M:%S by {uid} on {host}   這個設置可以告知用戶,Ansible修改了一個文件,并且手動寫入的內容可能已經被覆蓋.# by default, ansible-playbook will display "Skipping [host]" if it determines a task
# should not be run on a host.  Set this to "False" if you don't want to see these "Skipping" 
# messages. NOTE: the task header will still be shown regardless of whether or not the 
# task is skipped.
#display_skipped_hosts = True     顯示任何跳過任務的狀態 ，默認是顯示# by default (as of 1.3), Ansible will raise errors when attempting to dereference 
# Jinja2 variables that are not set in templates or action lines. Uncomment this line
# to revert the behavior to pre-1.3.
#error_on_undefined_vars = False      如果所引用的變量名稱錯誤的話, 將會導致ansible在執行步驟上失敗# by default (as of 1.6), Ansible may display warnings based on the configuration of the
# system running ansible itself. This may include warnings about 3rd party packages or
# other conditions that should be resolved if possible.
# to disable these warnings, set the following value to False:
#system_warnings = True    允許禁用系統運行ansible相關的潛在問題警告# by default (as of 1.4), Ansible may display deprecation warnings for language
# features that should no longer be used and will be removed in future versions.
# to disable these warnings, set the following value to False:
#deprecation_warnings = True     允許在ansible-playbook輸出結果中禁用“不建議使用”警告# (as of 1.8), Ansible can optionally warn when usage of the shell and
# command module appear to be simplified by using a default Ansible module
# instead.  These warnings can be silenced by adjusting the following
# setting or adding warn=yes or warn=no to the end of the command line 
# parameter string.  This will for example suggest using the git module
# instead of shelling out to the git command.
# command_warnings = False    當shell和命令行模塊被默認模塊簡化的時,Ansible 將默認發出警告# set plugin path directories here, separate with colons
action_plugins     = /usr/share/ansible_plugins/action_plugins  
callback_plugins   = /usr/share/ansible_plugins/callback_plugins
connection_plugins = /usr/share/ansible_plugins/connection_plugins
lookup_plugins     = /usr/share/ansible_plugins/lookup_plugins
vars_plugins       = /usr/share/ansible_plugins/vars_plugins
filter_plugins     = /usr/share/ansible_plugins/filter_plugins# by default callbacks are not loaded for /bin/ansible, enable this if you
# want, for example, a notification or logging callback to also apply to 
# /bin/ansible runs
#bin_ansible_callbacks = False    用來控制callback插件是否在運行 /usr/bin/ansible 的時候被加載. 這個模塊將用于命令行的日志系統,發出通知等特性# don't like cows?  that's unfortunate.
# set to 1 if you don't want cowsay support or export ANSIBLE_NOCOWS=1 
#nocows = 1    默認ansible可以調用一些cowsay的特性   開啟/禁用：0/1# don't like colors either?
# set to 1 if you don't want colors, or export ANSIBLE_NOCOLOR=1
#nocolor = 1  輸出帶上顏色區別， 開啟/關閉：0/1# the CA certificate path used for validating SSL certs. This path 
# should exist on the controlling node, not the target nodes
# common locations:
# RHEL/CentOS: /etc/pki/tls/certs/ca-bundle.crt
# Fedora     : /etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem
# Ubuntu     : /usr/share/ca-certificates/cacert.org/cacert.org.crt
#ca_file_path =    # the http user-agent string to use when fetching urls. Some web server
# operators block the default urllib user agent as it is frequently used
# by malicious attacks/scripts, so we set it to something unique to 
# avoid issues.
#http_user_agent = ansible-agent# if set to a persistent type (not 'memory', for example 'redis') fact values
# from previous runs in Ansible will be stored.  This may be useful when
# wanting to use, for example, IP information from one group of servers
# without having to talk to them in the same playbook run to get their
# current IP information.
fact_caching = memory# retry files
#retry_files_enabled = False
#retry_files_save_path = ~/.ansible-retry[privilege_escalation]
#become=True
#become_method=sudo
#become_user=root
#become_ask_pass=False[paramiko_connection]# uncomment this line to cause the paramiko connection plugin to not record new host
# keys encountered.  Increases performance on new host additions.  Setting works independently of the
# host key checking setting above.
#record_host_keys=False# by default, Ansible requests a pseudo-terminal for commands executed under sudo. Uncomment this
# line to disable this behaviour.
#pty=False[ssh_connection]# ssh arguments to use
# Leaving off ControlPersist will result in poor performance, so use 
# paramiko on older platforms rather than removing it
#ssh_args = -o ControlMaster=auto -o ControlPersist=60s# The path to use for the ControlPath sockets. This defaults to
# "%(directory)s/ansible-ssh-%%h-%%p-%%r", however on some systems with
# very long hostnames or very long path names (caused by long user names or 
# deeply nested home directories) this can exceed the character limit on
# file socket names (108 characters for most platforms). In that case, you 
# may wish to shorten the string below.
# 
# Example: 
# control_path = %(directory)s/%%h-%%r
#control_path = %(directory)s/ansible-ssh-%%h-%%p-%%r# Enabling pipelining reduces the number of SSH operations required to 
# execute a module on the remote server. This can result in a significant 
# performance improvement when enabled, however when using "sudo:" you must 
# first disable 'requiretty' in /etc/sudoers
#
# By default, this option is disabled to preserve compatibility with
# sudoers configurations that have requiretty (the default on many distros).
# 
#pipelining = False# if True, make ansible use scp if the connection type is ssh 
# (default is sftp)
#scp_if_ssh = True[accelerate]
accelerate_port = 5099
accelerate_timeout = 30
accelerate_connect_timeout = 5.0# The daemon timeout is measured in minutes. This time is measured
# from the last activity to the accelerate daemon.
accelerate_daemon_timeout = 30 # If set to yes, accelerate_multi_key will allow multiple
# private keys to be uploaded to it, though each user must
# have access to the system via SSH to add a new key. The default
# is "no".
#accelerate_multi_key = yes[selinux]
# file systems that require special treatment when dealing with security context
# the default behaviour that copies the existing context or uses the user default
# needs to be changed to use the file system dependant context.
#special_context_filesystems=nfs,vboxsf,fuse

簡易配置：

[defaults]
inventory      = /etc/ansible/hosts
sudo_user=root
remote_port=22
host_key_checking=False
remote_user=root
log_path=/var/log/ansible.log
module_name=command
private_key_file=/root/.ssh/id_rsa
no_log:True

?

　2.hosts

# This is the default ansible 'hosts' file.
#
# It should live in /etc/ansible/hosts
#
#   - Comments begin with the '#' character
#   - Blank lines are ignored
#   - Groups of hosts are delimited by [header] elements
#   - You can enter hostnames or ip addresses
#   - A hostname/ip can be a member of multiple groups# Ex 1: Ungrouped hosts, specify before any group headers.green.example.com
blue.example.com
192.168.100.1
192.168.100.10# Ex 2: A collection of hosts belonging to the 'webservers' group[webservers]
alpha.example.org
beta.example.org
192.168.1.100
192.168.1.110# If you have multiple hosts following a pattern you can specify
# them like this:www[001:006].example.com# Ex 3: A collection of database servers in the 'dbservers' group[dbservers]db01.intranet.mydomain.net
db02.intranet.mydomain.net
10.25.1.56
10.25.1.57# Here's another example of host ranges, this time there are no
# leading 0s:db-[99:101]-node.example.com