SDK 操作 list-view control 實例 -- 遍歷進程

遍歷窗口，獲得控件句柄

1 EnumChildWindows(hwndDlg, (WNDENUMPROC)EnumChildProc, NULL);

回調函數

 1 BOOL CALLBACK EnumChildProc(HWND hwnd, LPARAM lParam )
 2 {
 3     char strCLSName[MAXBYTE] = {0};
 4     GetClassName(hwnd, strCLSName, MAXBYTE);
 5     if (strcmp(strCLSName, "SysListView32") == 0)//找到列表控件
 6     {
 7         InsertColumn(hwnd);//添加標題
 8         EnumProgress(hwnd);//添加內容
 9         return true;//結束遍歷
10     }
11 
12     return false;//繼續遍歷子窗口
13 }

添加標題

 1 void InsertColumn(HWND hList)
 2 {
 3     LV_COLUMN lvc = {0};
 4     
 5     lvc.mask = LVCF_TEXT | LVCF_WIDTH;
 6     lvc.pszText = "PID";
 7     lvc.cx = 80;
 8     SendMessage(hList, LVM_INSERTCOLUMN, 0, (long)&lvc);
 9     lvc.pszText = "父進程PID";
10     lvc.cx = 100;
11     SendMessage(hList, LVM_INSERTCOLUMN, 1, (long)&lvc);
12     lvc.pszText = "映像名稱";
13     lvc.cx = 200;
14     SendMessage(hList, LVM_INSERTCOLUMN, 2, (long)&lvc);
15 }

添加內容

 1 BOOL EnumProgress(HWND hList)
 2 {
 3     BOOL bRet = FALSE; 
 4     HANDLE hProcessSnap = NULL;
 5     
 6     hProcessSnap = CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, 0); 
 7     if (hProcessSnap == INVALID_HANDLE_VALUE) 
 8     {
 9         return FALSE; 
10     }
11     
12     PROCESSENTRY32 pe32 = {0};
13     pe32.dwSize = sizeof(PROCESSENTRY32);
14     if (Process32First(hProcessSnap, &pe32)) 
15     { 
16         LVITEM lvi = {0};
17         lvi.mask = LVIF_TEXT;
18         char strTmp[MAXBYTE] = {0};
19         do 
20         { 
21             ZeroMemory(strTmp, MAXBYTE);
22             sprintf(strTmp, "%d", pe32.th32ProcessID);
23             lvi.iItem = 0;
24             lvi.iSubItem = 0;//發送LVM_INSERTITEM消息時，subitem必須為0
25             lvi.pszText = strTmp;
26             int nIndx = SendMessage(hList, LVM_INSERTITEM, 0, (LPARAM)&lvi);//返回值為item的索引
27             
28             ZeroMemory(strTmp, MAXBYTE);
29             sprintf(strTmp, "%d", pe32.th32ParentProcessID);
30             lvi.iItem = nIndx;
31             lvi.iSubItem = 1;
32             lvi.pszText = strTmp;
33             SendMessage(hList, LVM_SETITEM, 0, (LPARAM)&lvi);
34             
35             lvi.iSubItem = 2;
36             lvi.iItem = nIndx;
37             lvi.pszText = pe32.szExeFile;
38             SendMessage(hList, LVM_SETITEM, 0, (LPARAM)&lvi);
39         } 
40         while (Process32Next(hProcessSnap, &pe32)); 
41         bRet = TRUE; 
42     } 
43     else 
44     {
45         bRet = FALSE;
46     }
47     
48     CloseHandle (hProcessSnap); 
49     return bRet; 
50 }

轉載于:https://www.cnblogs.com/luzhiyuan/p/3899088.html

本文來自互聯網用戶投稿，該文觀點僅代表作者本人，不代表本站立場。本站僅提供信息存儲空間服務，不擁有所有權，不承擔相關法律責任。
如若轉載，請注明出處：http://www.pswp.cn/news/376764.shtml
繁體地址，請注明出處：http://hk.pswp.cn/news/376764.shtml
英文地址，請注明出處：http://en.pswp.cn/news/376764.shtml

如若內容造成侵權/違法違規/事實不符，請聯系多彩編程網進行投訴反饋email:809451989@qq.com，一經查實，立即刪除！